Re: [PATCH v4 17/17] iio: adc: ad7768-1: add low pass -3dB cutoff attribute

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Looks good. Minor comment inline.

On 03/06, Jonathan Santos wrote:
> Ad7768-1 has a different -3db frequency multiplier depending on
> the filter type configured. The cutoff frequency also varies according
> to the current ODR.
> 
> Add a readonly low pass -3dB frequency cutoff attribute to clarify to
> the user which bandwidth is being allowed depending on the filter
> configurations.
> 
> Signed-off-by: Jonathan Santos <Jonathan.Santos@xxxxxxxxxx>
> ---

Reviewed-by: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>

> v4 Changes:
> * None
> 
> v3 Changes:
> * None
> 
> v2 Changes:
> * New patch in v2.
> ---
>  drivers/iio/adc/ad7768-1.c | 22 ++++++++++++++++++++--
>  1 file changed, 20 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iio/adc/ad7768-1.c b/drivers/iio/adc/ad7768-1.c
> index 664d0b535340..9ba00e9089bd 100644
> --- a/drivers/iio/adc/ad7768-1.c
> +++ b/drivers/iio/adc/ad7768-1.c
> @@ -150,6 +150,17 @@ enum ad7768_scan_type {
>  	AD7768_SCAN_TYPE_HIGH_SPEED,
>  };
>  
> +/*
> + * -3dB cutoff frequency multipliers (relative to ODR) for
> + * each filter type. Values are multiplied by 1000.
> + */
> +static const int ad7768_filter_3db_odr_multiplier[] = {
> +	[AD7768_FILTER_SINC5] = 204,
> +	[AD7768_FILTER_SINC3] = 261,
> +	[AD7768_FILTER_SINC3_REJ60] = 261,

Are these constants from ADAQ7768-1 datasheet?
There it says "the sinc3 filter has a −3 dB bandwidth of 0.2617 × ODR."
If so, maybe use 262 as SINC3 multiplier?

> +	[AD7768_FILTER_WIDEBAND] = 433,
> +};
> +
>  static const int ad7768_mclk_div_rates[4] = {
>  	16, 8, 4, 2,
>  };
> @@ -228,7 +239,8 @@ static const struct iio_chan_spec ad7768_channels[] = {
>  		.type = IIO_VOLTAGE,
>  		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
>  		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |
> -					    BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> +					    BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO) |
> +					    BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
>  		.info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
>  		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
>  		.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
> @@ -762,7 +774,7 @@ static int ad7768_read_raw(struct iio_dev *indio_dev,
>  {
>  	struct ad7768_state *st = iio_priv(indio_dev);
>  	const struct iio_scan_type *scan_type;
> -	int scale_uv, ret;
> +	int scale_uv, ret, temp;
>  
>  	scan_type = iio_get_current_scan_type(indio_dev, chan);
>  	if (IS_ERR(scan_type))
> @@ -802,6 +814,12 @@ static int ad7768_read_raw(struct iio_dev *indio_dev,
>  	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
>  		*val = st->oversampling_ratio;
>  
> +		return IIO_VAL_INT;
> +
> +	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
> +		temp = st->samp_freq * ad7768_filter_3db_odr_multiplier[st->filter_type];
> +		*val = DIV_ROUND_CLOSEST(temp, 1000);
> +
>  		return IIO_VAL_INT;
>  	}
>  
> -- 
> 2.34.1
> 




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux