> > --- > > V2 -> V3: Adjusted indentation to resolve wrong indentation warning. > > Changed node name to converter. Updated the descriptions to clarify > > the properties. > > > > +title: ADMFM2000 Dual Microwave Down Converter > > + > > +maintainers: > > + - Kim Seer Paller <kimseer.paller@xxxxxxxxxx> > > + > > +description: > > + Dual microwave down converter module with input RF and LO frequency > ranges > > + from 0.5 to 32 GHz and an output IF frequency range from 0.1 to 8 GHz. > > + It consists of a LNA, mixer, IF filter, DSA, and IF amplifier for each down > > + conversion path. > > + > > +properties: > > + compatible: > > + enum: > > + - adi,admfm2000 > > + > > + switch1-gpios: > > + items: > > + - description: > > + Setting B15 GPIO to high and B16 GPIO to low will result in channel 1 > > + being in Direct IF mode. > > + - description: > > + Setting B15 GPIO to low and B16 GPIO to high will result in channel 1 > > + being in Mixer mode. > > This still does not tell which one is B15 and which is B16. I am asking > this for third time. > > items: > - description: B15 GPIO, when high (and B16 low) channel 1 is in > Direct IF mode I understand now, thank you. I was also wondering if this applies to the attenuation-gpios, or if I should keep it as is? Best regards, Kim
