On 22/11/2023 11:58, Kim Seer Paller wrote: > Dual microwave down converter module with input RF and LO frequency > ranges from 0.5 to 32 GHz and an output IF frequency range from 0.1 to > 8 GHz. It consists of a LNA, mixer, IF filter, DSA, and IF amplifier > for each down conversion path. > > Signed-off-by: Kim Seer Paller <kimseer.paller@xxxxxxxxxx> > Reported-by: kernel test robot <lkp@xxxxxxxxx> > Closes: https://lore.kernel.org/oe-kbuild-all/202311220624.J7Nqg5h1-lkp@xxxxxxxxx/ Drop these two tags. They are not valid. > --- > V2 -> V3: Adjusted indentation to resolve wrong indentation warning. > Changed node name to converter. Updated the descriptions to clarify > the properties. > +title: ADMFM2000 Dual Microwave Down Converter > + > +maintainers: > + - Kim Seer Paller <kimseer.paller@xxxxxxxxxx> > + > +description: > + Dual microwave down converter module with input RF and LO frequency ranges > + from 0.5 to 32 GHz and an output IF frequency range from 0.1 to 8 GHz. > + It consists of a LNA, mixer, IF filter, DSA, and IF amplifier for each down > + conversion path. > + > +properties: > + compatible: > + enum: > + - adi,admfm2000 > + > + switch1-gpios: > + items: > + - description: > + Setting B15 GPIO to high and B16 GPIO to low will result in channel 1 > + being in Direct IF mode. > + - description: > + Setting B15 GPIO to low and B16 GPIO to high will result in channel 1 > + being in Mixer mode. This still does not tell which one is B15 and which is B16. I am asking this for third time. items: - description: B15 GPIO, when high (and B16 low) channel 1 is in Direct IF mode Best regards, Krzysztof
