On 11/11/23 23:07, Nia Espera wrote:
Device tree files for OnePlus 9 and 9 Pro. Details of supported features
mentioned in the cover letter for this patch series, but for
accessibility also repeated here:
- USB OTG
- UFS
- Framebuffer display
- Touchscreen (for lemonade)
- Power & volume down keys
- Battery reading
- Modem, IPA, and remoteproc bringup
Steps to get booting:
- Wipe dtbo partition
- Flash vbmeta with disabled verity bit
- Flash kernel and initfs to boot partition with CLI args pd_ignore_unused
and clk_ignore_unused as v1 bootimg
- Flash rootfs to some other partition (probably super or userdata)
Thanks for including this info here
+&pmk8350_vadc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio1_adc_default>, <&gpio3_adc_default>;
+
+ /* pmk8350-ref-gnd */
I fail to see the benefit in having this both here and in the label
+ channel@0 {
+ reg = <0x00>;
+ qcom,pre-scaling = <1 1>;
+ label = "pmk8350_ref_gnd";
+ };
+
[...]
+&tlmm {
+ gpio-reserved-ranges = <52 8>;
Would you know what these are connected to?
[...]
+&mpss {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rf_cable_ant0_active>;
patch-wide:
property-n
property-names
Konrad
