This patch remove the transfer functions of the driver and make use of
regmap. Multi-read bit is checked during probe at first in order to
configure the regmap and not copied anymore.
The multi-read bit can be set also for a single read.
Signed-off-by: Denis Ciocca <denis.ciocca@xxxxxx>
---
drivers/iio/accel/st_accel_core.c | 3 -
drivers/iio/accel/st_accel_i2c.c | 7 +-
drivers/iio/accel/st_accel_spi.c | 6 +-
.../iio/common/st_sensors/st_sensors_buffer.c | 10 +-
.../iio/common/st_sensors/st_sensors_core.c | 47 +++-----
.../iio/common/st_sensors/st_sensors_i2c.c | 65 +++++------
.../iio/common/st_sensors/st_sensors_spi.c | 103 +++++-------------
.../common/st_sensors/st_sensors_trigger.c | 10 +-
drivers/iio/gyro/st_gyro_core.c | 3 -
drivers/iio/gyro/st_gyro_i2c.c | 5 +-
drivers/iio/gyro/st_gyro_spi.c | 6 +-
drivers/iio/magnetometer/st_magn_core.c | 3 -
drivers/iio/magnetometer/st_magn_i2c.c | 5 +-
drivers/iio/magnetometer/st_magn_spi.c | 6 +-
drivers/iio/pressure/st_pressure_core.c | 3 -
drivers/iio/pressure/st_pressure_i2c.c | 5 +-
drivers/iio/pressure/st_pressure_spi.c | 6 +-
include/linux/iio/common/st_sensors.h | 37 +------
include/linux/iio/common/st_sensors_i2c.h | 5 +-
include/linux/iio/common/st_sensors_spi.h | 5 +-
20 files changed, 126 insertions(+), 214 deletions(-)
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 5029b399efa8..5b8c1ef43ff8 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -13,7 +13,6 @@
#include <linux/acpi.h>
#include <linux/errno.h>
#include <linux/types.h>
-#include <linux/mutex.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
@@ -1175,7 +1174,6 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &accel_info;
- mutex_init(&adata->tb.buf_lock);
err = st_sensors_power_enable(indio_dev);
if (err)
@@ -1188,7 +1186,6 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
goto st_accel_power_off;
adata->num_data_channels = ST_ACCEL_NUMBER_DATA_CHANNELS;
- adata->multiread_bit = adata->sensor_settings->multi_read_bit;
indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
channels_size = indio_dev->num_channels * sizeof(struct iio_chan_spec);
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
index c3c8f2e73c2a..f2162f8cf2ac 100644
--- a/drivers/iio/accel/st_accel_i2c.c
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -150,8 +150,8 @@ MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
static int st_accel_i2c_probe(struct i2c_client *client)
{
- struct iio_dev *indio_dev;
struct st_sensor_data *adata;
+ struct iio_dev *indio_dev;
const char *match;
int ret;
@@ -165,7 +165,10 @@ static int st_accel_i2c_probe(struct i2c_client *client)
if (match)
strlcpy(client->name, match, sizeof(client->name));
- st_sensors_i2c_configure(indio_dev, client, adata);
+ ret = st_sensors_i2c_configure(indio_dev, client,
+ st_accel_multiread_bit(client->name));
+ if (ret < 0)
+ return ret;
ret = st_accel_common_probe(indio_dev);
if (ret < 0)
diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
index 474742e35d92..a121755d6d8c 100644
--- a/drivers/iio/accel/st_accel_spi.c
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -114,7 +114,11 @@ static int st_accel_spi_probe(struct spi_device *spi)
st_sensors_of_name_probe(&spi->dev, st_accel_of_match,
spi->modalias, sizeof(spi->modalias));
- st_sensors_spi_configure(indio_dev, spi, adata);
+
+ err = st_sensors_spi_configure(indio_dev, spi,
+ st_accel_multiread_bit(spi->modalias));
+ if (err < 0)
+ return err;
err = st_accel_common_probe(indio_dev);
if (err < 0)
diff --git a/drivers/iio/common/st_sensors/st_sensors_buffer.c b/drivers/iio/common/st_sensors/st_sensors_buffer.c
index 4a68669dc555..eee30130ae23 100644
--- a/drivers/iio/common/st_sensors/st_sensors_buffer.c
+++ b/drivers/iio/common/st_sensors/st_sensors_buffer.c
@@ -17,15 +17,16 @@
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/irqreturn.h>
+#include <linux/regmap.h>
#include <linux/iio/common/st_sensors.h>
static int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf)
{
- int i;
struct st_sensor_data *sdata = iio_priv(indio_dev);
unsigned int num_data_channels = sdata->num_data_channels;
+ int i;
for_each_set_bit(i, indio_dev->active_scan_mask, num_data_channels) {
const struct iio_chan_spec *channel = &indio_dev->channels[i];
@@ -36,11 +37,8 @@ static int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf)
channel->scan_type.storagebits >> 3;
buf = PTR_ALIGN(buf, storage_bytes);
- if (sdata->tf->read_multiple_byte(&sdata->tb, sdata->dev,
- channel->address,
- bytes_to_read, buf,
- sdata->multiread_bit) <
- bytes_to_read)
+ if (regmap_bulk_read(sdata->regmap, channel->address,
+ buf, bytes_to_read) < 0)
return -EIO;
/* Advance the buffer pointer */
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index 243b2097c57e..3ddab3ca0a4b 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -15,6 +15,7 @@
#include <linux/regulator/consumer.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/regmap.h>
#include <asm/unaligned.h>
#include <linux/iio/common/st_sensors.h>
@@ -28,19 +29,10 @@ static inline u32 st_sensors_get_unaligned_le24(const u8 *p)
int st_sensors_write_data_with_mask(struct iio_dev *indio_dev,
u8 reg_addr, u8 mask, u8 data)
{
- int err;
- u8 new_data;
struct st_sensor_data *sdata = iio_priv(indio_dev);
- err = sdata->tf->read_byte(&sdata->tb, sdata->dev, reg_addr, &new_data);
- if (err < 0)
- goto st_sensors_write_data_with_mask_error;
-
- new_data = ((new_data & (~mask)) | ((data << __ffs(mask)) & mask));
- err = sdata->tf->write_byte(&sdata->tb, sdata->dev, reg_addr, new_data);
-
-st_sensors_write_data_with_mask_error:
- return err;
+ return regmap_update_bits(sdata->regmap,
+ reg_addr, mask, data << __ffs(mask));
}
int st_sensors_debugfs_reg_access(struct iio_dev *indio_dev,
@@ -48,19 +40,15 @@ int st_sensors_debugfs_reg_access(struct iio_dev *indio_dev,
unsigned *readval)
{
struct st_sensor_data *sdata = iio_priv(indio_dev);
- u8 readdata;
int err;
if (!readval)
- return sdata->tf->write_byte(&sdata->tb, sdata->dev,
- (u8)reg, (u8)writeval);
+ return regmap_write(sdata->regmap, reg, writeval);
- err = sdata->tf->read_byte(&sdata->tb, sdata->dev, (u8)reg, &readdata);
+ err = regmap_read(sdata->regmap, reg, readval);
if (err < 0)
return err;
- *readval = (unsigned)readdata;
-
return 0;
}
EXPORT_SYMBOL(st_sensors_debugfs_reg_access);
@@ -545,7 +533,7 @@ int st_sensors_set_fullscale_by_gain(struct iio_dev *indio_dev, int scale)
EXPORT_SYMBOL(st_sensors_set_fullscale_by_gain);
static int st_sensors_read_axis_data(struct iio_dev *indio_dev,
- struct iio_chan_spec const *ch, int *data)
+ struct iio_chan_spec const *ch, int *data)
{
int err;
u8 *outdata;
@@ -558,9 +546,8 @@ static int st_sensors_read_axis_data(struct iio_dev *indio_dev,
if (!outdata)
return -ENOMEM;
- err = sdata->tf->read_multiple_byte(&sdata->tb, sdata->dev,
- ch->address, byte_for_channel,
- outdata, sdata->multiread_bit);
+ err = regmap_bulk_read(sdata->regmap, ch->address,
+ outdata, byte_for_channel);
if (err < 0)
goto st_sensors_free_memory;
@@ -608,8 +595,9 @@ int st_sensors_read_info_raw(struct iio_dev *indio_dev,
}
EXPORT_SYMBOL(st_sensors_read_info_raw);
-static int st_sensors_init_interface_mode(struct iio_dev *indio_dev,
- const struct st_sensor_settings *sensor_settings)
+static int
+st_sensors_init_interface_mode(struct iio_dev *indio_dev,
+ const struct st_sensor_settings *sensor_settings)
{
struct st_sensor_data *sdata = iio_priv(indio_dev);
struct device_node *np = sdata->dev->of_node;
@@ -620,9 +608,9 @@ static int st_sensors_init_interface_mode(struct iio_dev *indio_dev,
(pdata && pdata->spi_3wire)) && sensor_settings->sim.addr) {
int err;
- err = sdata->tf->write_byte(&sdata->tb, sdata->dev,
- sensor_settings->sim.addr,
- sensor_settings->sim.value);
+ err = regmap_bulk_write(sdata->regmap,
+ sensor_settings->sim.addr,
+ &sensor_settings->sim.value, 1);
if (err < 0) {
dev_err(&indio_dev->dev,
"failed to init interface mode\n");
@@ -667,8 +655,7 @@ int st_sensors_check_device_support(struct iio_dev *indio_dev,
const struct st_sensor_settings *sensor_settings)
{
struct st_sensor_data *sdata = iio_priv(indio_dev);
- int i, err = 0;
- u8 wai;
+ int i, wai, err = 0;
i = st_sensors_get_settings_index(indio_dev->name,
sensor_settings, num_sensors_list);
@@ -683,8 +670,8 @@ int st_sensors_check_device_support(struct iio_dev *indio_dev,
return err;
if (sensor_settings[i].wai_addr) {
- err = sdata->tf->read_byte(&sdata->tb, sdata->dev,
- sensor_settings[i].wai_addr, &wai);
+ err = regmap_read(sdata->regmap,
+ sensor_settings[i].wai_addr, &wai);
if (err < 0) {
dev_err(&indio_dev->dev,
"failed to read Who-Am-I register.\n");
diff --git a/drivers/iio/common/st_sensors/st_sensors_i2c.c b/drivers/iio/common/st_sensors/st_sensors_i2c.c
index b1c9812407e7..c8e03a63b17b 100644
--- a/drivers/iio/common/st_sensors/st_sensors_i2c.c
+++ b/drivers/iio/common/st_sensors/st_sensors_i2c.c
@@ -13,6 +13,7 @@
#include <linux/iio/iio.h>
#include <linux/of_device.h>
#include <linux/acpi.h>
+#include <linux/regmap.h>
#include <linux/iio/common/st_sensors_i2c.h>
@@ -26,55 +27,45 @@ static unsigned int st_sensors_i2c_get_irq(struct iio_dev *indio_dev)
return to_i2c_client(sdata->dev)->irq;
}
-static int st_sensors_i2c_read_byte(struct st_sensor_transfer_buffer *tb,
- struct device *dev, u8 reg_addr, u8 *res_byte)
-{
- int err;
-
- err = i2c_smbus_read_byte_data(to_i2c_client(dev), reg_addr);
- if (err < 0)
- goto st_accel_i2c_read_byte_error;
-
- *res_byte = err & 0xff;
-
-st_accel_i2c_read_byte_error:
- return err < 0 ? err : 0;
-}
-
-static int st_sensors_i2c_read_multiple_byte(
- struct st_sensor_transfer_buffer *tb, struct device *dev,
- u8 reg_addr, int len, u8 *data, bool multiread_bit)
-{
- if (multiread_bit)
- reg_addr |= ST_SENSORS_I2C_MULTIREAD;
+static const struct regmap_config st_sensors_i2c_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
- return i2c_smbus_read_i2c_block_data_or_emulated(to_i2c_client(dev),
- reg_addr, len, data);
-}
+static const struct regmap_config st_sensors_i2c_regmap_multiread_bit_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .read_flag_mask = ST_SENSORS_I2C_MULTIREAD,
+};
-static int st_sensors_i2c_write_byte(struct st_sensor_transfer_buffer *tb,
- struct device *dev, u8 reg_addr, u8 data)
+int st_sensors_i2c_configure(struct iio_dev *indio_dev,
+ struct i2c_client *client,
+ bool multiread_bit)
{
- return i2c_smbus_write_byte_data(to_i2c_client(dev), reg_addr, data);
-}
+ struct st_sensor_data *sdata = iio_priv(indio_dev);
+ const struct regmap_config *config;
-static const struct st_sensor_transfer_function st_sensors_tf_i2c = {
- .read_byte = st_sensors_i2c_read_byte,
- .write_byte = st_sensors_i2c_write_byte,
- .read_multiple_byte = st_sensors_i2c_read_multiple_byte,
-};
+ if (multiread_bit)
+ config = &st_sensors_i2c_regmap_multiread_bit_config;
+ else
+ config = &st_sensors_i2c_regmap_config;
+
+ sdata->regmap = devm_regmap_init_i2c(client, config);
+ if (IS_ERR(sdata->regmap)) {
+ dev_err(&client->dev, "Failed to register i2c regmap (%d)\n",
+ (int)PTR_ERR(sdata->regmap));
+ return PTR_ERR(sdata->regmap);
+ }
-void st_sensors_i2c_configure(struct iio_dev *indio_dev,
- struct i2c_client *client, struct st_sensor_data *sdata)
-{
i2c_set_clientdata(client, indio_dev);
indio_dev->dev.parent = &client->dev;
indio_dev->name = client->name;
sdata->dev = &client->dev;
- sdata->tf = &st_sensors_tf_i2c;
sdata->get_irq_data_ready = st_sensors_i2c_get_irq;
+
+ return 0;
}
EXPORT_SYMBOL(st_sensors_i2c_configure);
diff --git a/drivers/iio/common/st_sensors/st_sensors_spi.c b/drivers/iio/common/st_sensors/st_sensors_spi.c
index 2213843f02cb..bf3627be4b8a 100644
--- a/drivers/iio/common/st_sensors/st_sensors_spi.c
+++ b/drivers/iio/common/st_sensors/st_sensors_spi.c
@@ -11,12 +11,12 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/iio/iio.h>
+#include <linux/regmap.h>
#include <linux/iio/common/st_sensors_spi.h>
#define ST_SENSORS_SPI_MULTIREAD 0xc0
-#define ST_SENSORS_SPI_READ 0x80
static unsigned int st_sensors_spi_get_irq(struct iio_dev *indio_dev)
{
@@ -25,94 +25,45 @@ static unsigned int st_sensors_spi_get_irq(struct iio_dev *indio_dev)
return to_spi_device(sdata->dev)->irq;
}
-static int st_sensors_spi_read(struct st_sensor_transfer_buffer *tb,
- struct device *dev, u8 reg_addr, int len, u8 *data, bool multiread_bit)
-{
- int err;
-
- struct spi_transfer xfers[] = {
- {
- .tx_buf = tb->tx_buf,
- .bits_per_word = 8,
- .len = 1,
- },
- {
- .rx_buf = tb->rx_buf,
- .bits_per_word = 8,
- .len = len,
- }
- };
-
- mutex_lock(&tb->buf_lock);
- if ((multiread_bit) && (len > 1))
- tb->tx_buf[0] = reg_addr | ST_SENSORS_SPI_MULTIREAD;
- else
- tb->tx_buf[0] = reg_addr | ST_SENSORS_SPI_READ;
-
- err = spi_sync_transfer(to_spi_device(dev), xfers, ARRAY_SIZE(xfers));
- if (err)
- goto acc_spi_read_error;
-
- memcpy(data, tb->rx_buf, len);
- mutex_unlock(&tb->buf_lock);
- return len;
-
-acc_spi_read_error:
- mutex_unlock(&tb->buf_lock);
- return err;
-}
-
-static int st_sensors_spi_read_byte(struct st_sensor_transfer_buffer *tb,
- struct device *dev, u8 reg_addr, u8 *res_byte)
-{
- return st_sensors_spi_read(tb, dev, reg_addr, 1, res_byte, false);
-}
+static const struct regmap_config st_sensors_spi_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
-static int st_sensors_spi_read_multiple_byte(
- struct st_sensor_transfer_buffer *tb, struct device *dev,
- u8 reg_addr, int len, u8 *data, bool multiread_bit)
-{
- return st_sensors_spi_read(tb, dev, reg_addr, len, data, multiread_bit);
-}
+static const struct regmap_config st_sensors_spi_regmap_multiread_bit_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .read_flag_mask = ST_SENSORS_SPI_MULTIREAD,
+};
-static int st_sensors_spi_write_byte(struct st_sensor_transfer_buffer *tb,
- struct device *dev, u8 reg_addr, u8 data)
+int st_sensors_spi_configure(struct iio_dev *indio_dev,
+ struct spi_device *spi,
+ bool multiread_bit)
{
- int err;
-
- struct spi_transfer xfers = {
- .tx_buf = tb->tx_buf,
- .bits_per_word = 8,
- .len = 2,
- };
-
- mutex_lock(&tb->buf_lock);
- tb->tx_buf[0] = reg_addr;
- tb->tx_buf[1] = data;
-
- err = spi_sync_transfer(to_spi_device(dev), &xfers, 1);
- mutex_unlock(&tb->buf_lock);
+ struct st_sensor_data *sdata = iio_priv(indio_dev);
+ const struct regmap_config *config;
- return err;
-}
+ if (multiread_bit)
+ config = &st_sensors_spi_regmap_multiread_bit_config;
+ else
+ config = &st_sensors_spi_regmap_config;
-static const struct st_sensor_transfer_function st_sensors_tf_spi = {
- .read_byte = st_sensors_spi_read_byte,
- .write_byte = st_sensors_spi_write_byte,
- .read_multiple_byte = st_sensors_spi_read_multiple_byte,
-};
+ sdata->regmap = devm_regmap_init_spi(spi, config);
+ if (IS_ERR(sdata->regmap)) {
+ dev_err(&spi->dev, "Failed to register spi regmap (%d)\n",
+ (int)PTR_ERR(sdata->regmap));
+ return PTR_ERR(sdata->regmap);
+ }
-void st_sensors_spi_configure(struct iio_dev *indio_dev,
- struct spi_device *spi, struct st_sensor_data *sdata)
-{
spi_set_drvdata(spi, indio_dev);
indio_dev->dev.parent = &spi->dev;
indio_dev->name = spi->modalias;
sdata->dev = &spi->dev;
- sdata->tf = &st_sensors_tf_spi;
sdata->get_irq_data_ready = st_sensors_spi_get_irq;
+
+ return 0;
}
EXPORT_SYMBOL(st_sensors_spi_configure);
diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c
index 630c8cb35e8b..bed7b8682b17 100644
--- a/drivers/iio/common/st_sensors/st_sensors_trigger.c
+++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c
@@ -13,6 +13,7 @@
#include <linux/iio/iio.h>
#include <linux/iio/trigger.h>
#include <linux/interrupt.h>
+#include <linux/regmap.h>
#include <linux/iio/common/st_sensors.h>
#include "st_sensors_core.h"
@@ -26,8 +27,7 @@
static int st_sensors_new_samples_available(struct iio_dev *indio_dev,
struct st_sensor_data *sdata)
{
- u8 status;
- int ret;
+ int ret, status;
/* How would I know if I can't check it? */
if (!sdata->sensor_settings->drdy_irq.stat_drdy.addr)
@@ -37,9 +37,9 @@ static int st_sensors_new_samples_available(struct iio_dev *indio_dev,
if (!indio_dev->active_scan_mask)
return 0;
- ret = sdata->tf->read_byte(&sdata->tb, sdata->dev,
- sdata->sensor_settings->drdy_irq.stat_drdy.addr,
- &status);
+ ret = regmap_read(sdata->regmap,
+ sdata->sensor_settings->drdy_irq.stat_drdy.addr,
+ &status);
if (ret < 0) {
dev_err(sdata->dev,
"error checking samples available\n");
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index 84a014fdcad2..5223b3118221 100644
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -12,7 +12,6 @@
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/types.h>
-#include <linux/mutex.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
@@ -392,7 +391,6 @@ int st_gyro_common_probe(struct iio_dev *indio_dev)
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &gyro_info;
- mutex_init(&gdata->tb.buf_lock);
err = st_sensors_power_enable(indio_dev);
if (err)
@@ -405,7 +403,6 @@ int st_gyro_common_probe(struct iio_dev *indio_dev)
goto st_gyro_power_off;
gdata->num_data_channels = ST_GYRO_NUMBER_DATA_CHANNELS;
- gdata->multiread_bit = gdata->sensor_settings->multi_read_bit;
indio_dev->channels = gdata->sensor_settings->ch;
indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
diff --git a/drivers/iio/gyro/st_gyro_i2c.c b/drivers/iio/gyro/st_gyro_i2c.c
index f2a8683db7d9..fa560f68e022 100644
--- a/drivers/iio/gyro/st_gyro_i2c.c
+++ b/drivers/iio/gyro/st_gyro_i2c.c
@@ -77,7 +77,10 @@ static int st_gyro_i2c_probe(struct i2c_client *client,
st_sensors_of_name_probe(&client->dev, st_gyro_of_match,
client->name, sizeof(client->name));
- st_sensors_i2c_configure(indio_dev, client, gdata);
+ err = st_sensors_i2c_configure(indio_dev, client,
+ st_gyro_multiread_bit(client->name));
+ if (err < 0)
+ return err;
err = st_gyro_common_probe(indio_dev);
if (err < 0)
diff --git a/drivers/iio/gyro/st_gyro_spi.c b/drivers/iio/gyro/st_gyro_spi.c
index 93c48248bea6..9bb58d2d72ed 100644
--- a/drivers/iio/gyro/st_gyro_spi.c
+++ b/drivers/iio/gyro/st_gyro_spi.c
@@ -81,7 +81,11 @@ static int st_gyro_spi_probe(struct spi_device *spi)
st_sensors_of_name_probe(&spi->dev, st_gyro_of_match,
spi->modalias, sizeof(spi->modalias));
- st_sensors_spi_configure(indio_dev, spi, gdata);
+
+ err = st_sensors_spi_configure(indio_dev, spi,
+ st_gyro_multiread_bit(spi->modalias));
+ if (err < 0)
+ return err;
err = st_gyro_common_probe(indio_dev);
if (err < 0)
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index 2d8919eb5ada..4aa118e72ef6 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -12,7 +12,6 @@
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/types.h>
-#include <linux/mutex.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
@@ -494,7 +493,6 @@ int st_magn_common_probe(struct iio_dev *indio_dev)
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &magn_info;
- mutex_init(&mdata->tb.buf_lock);
err = st_sensors_power_enable(indio_dev);
if (err)
@@ -507,7 +505,6 @@ int st_magn_common_probe(struct iio_dev *indio_dev)
goto st_magn_power_off;
mdata->num_data_channels = ST_MAGN_NUMBER_DATA_CHANNELS;
- mdata->multiread_bit = mdata->sensor_settings->multi_read_bit;
indio_dev->channels = mdata->sensor_settings->ch;
indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
diff --git a/drivers/iio/magnetometer/st_magn_i2c.c b/drivers/iio/magnetometer/st_magn_i2c.c
index 4d014fd1aeb0..52e9be5088be 100644
--- a/drivers/iio/magnetometer/st_magn_i2c.c
+++ b/drivers/iio/magnetometer/st_magn_i2c.c
@@ -69,7 +69,10 @@ static int st_magn_i2c_probe(struct i2c_client *client,
st_sensors_of_name_probe(&client->dev, st_magn_of_match,
client->name, sizeof(client->name));
- st_sensors_i2c_configure(indio_dev, client, mdata);
+ err = st_sensors_i2c_configure(indio_dev, client,
+ st_magn_multiread_bit(client->name));
+ if (err < 0)
+ return err;
err = st_magn_common_probe(indio_dev);
if (err < 0)
diff --git a/drivers/iio/magnetometer/st_magn_spi.c b/drivers/iio/magnetometer/st_magn_spi.c
index 0d47070611b1..80c32a1720cd 100644
--- a/drivers/iio/magnetometer/st_magn_spi.c
+++ b/drivers/iio/magnetometer/st_magn_spi.c
@@ -63,7 +63,11 @@ static int st_magn_spi_probe(struct spi_device *spi)
st_sensors_of_name_probe(&spi->dev, st_magn_of_match,
spi->modalias, sizeof(spi->modalias));
- st_sensors_spi_configure(indio_dev, spi, mdata);
+
+ err = st_sensors_spi_configure(indio_dev, spi,
+ st_magn_multiread_bit(spi->modalias));
+ if (err < 0)
+ return err;
err = st_magn_common_probe(indio_dev);
if (err < 0)
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index fb3bfaa00e85..9160ccfbef59 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -12,7 +12,6 @@
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/types.h>
-#include <linux/mutex.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
@@ -690,7 +689,6 @@ int st_press_common_probe(struct iio_dev *indio_dev)
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &press_info;
- mutex_init(&press_data->tb.buf_lock);
err = st_sensors_power_enable(indio_dev);
if (err)
@@ -709,7 +707,6 @@ int st_press_common_probe(struct iio_dev *indio_dev)
* element.
*/
press_data->num_data_channels = press_data->sensor_settings->num_ch - 1;
- press_data->multiread_bit = press_data->sensor_settings->multi_read_bit;
indio_dev->channels = press_data->sensor_settings->ch;
indio_dev->num_channels = press_data->sensor_settings->num_ch;
diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c
index b7d9ba706abc..97468ca16dd5 100644
--- a/drivers/iio/pressure/st_pressure_i2c.c
+++ b/drivers/iio/pressure/st_pressure_i2c.c
@@ -103,7 +103,10 @@ static int st_press_i2c_probe(struct i2c_client *client,
} else if (!id)
return -ENODEV;
- st_sensors_i2c_configure(indio_dev, client, press_data);
+ ret = st_sensors_i2c_configure(indio_dev, client,
+ st_press_multiread_bit(client->name));
+ if (ret < 0)
+ return ret;
ret = st_press_common_probe(indio_dev);
if (ret < 0)
diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c
index ef61401c41d3..ae2fbcb2169e 100644
--- a/drivers/iio/pressure/st_pressure_spi.c
+++ b/drivers/iio/pressure/st_pressure_spi.c
@@ -73,7 +73,11 @@ static int st_press_spi_probe(struct spi_device *spi)
st_sensors_of_name_probe(&spi->dev, st_press_of_match,
spi->modalias, sizeof(spi->modalias));
- st_sensors_spi_configure(indio_dev, spi, press_data);
+
+ err = st_sensors_spi_configure(indio_dev, spi,
+ st_press_multiread_bit(spi->modalias));
+ if (err < 0)
+ return err;
err = st_press_common_probe(indio_dev);
if (err < 0)
diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
index 17fbf3e9b013..edd7a538f58c 100644
--- a/include/linux/iio/common/st_sensors.h
+++ b/include/linux/iio/common/st_sensors.h
@@ -16,6 +16,7 @@
#include <linux/iio/trigger.h>
#include <linux/bitops.h>
#include <linux/regulator/consumer.h>
+#include <linux/regmap.h>
#include <linux/platform_data/st_sensors_pdata.h>
@@ -169,36 +170,6 @@ struct st_sensor_data_ready_irq {
} ig1;
};
-/**
- * struct st_sensor_transfer_buffer - ST sensor device I/O buffer
- * @buf_lock: Mutex to protect rx and tx buffers.
- * @tx_buf: Buffer used by SPI transfer function to send data to the sensors.
- * This buffer is used to avoid DMA not-aligned issue.
- * @rx_buf: Buffer used by SPI transfer to receive data from sensors.
- * This buffer is used to avoid DMA not-aligned issue.
- */
-struct st_sensor_transfer_buffer {
- struct mutex buf_lock;
- u8 rx_buf[ST_SENSORS_RX_MAX_LENGTH];
- u8 tx_buf[ST_SENSORS_TX_MAX_LENGTH] ____cacheline_aligned;
-};
-
-/**
- * struct st_sensor_transfer_function - ST sensor device I/O function
- * @read_byte: Function used to read one byte.
- * @write_byte: Function used to write one byte.
- * @read_multiple_byte: Function used to read multiple byte.
- */
-struct st_sensor_transfer_function {
- int (*read_byte) (struct st_sensor_transfer_buffer *tb,
- struct device *dev, u8 reg_addr, u8 *res_byte);
- int (*write_byte) (struct st_sensor_transfer_buffer *tb,
- struct device *dev, u8 reg_addr, u8 data);
- int (*read_multiple_byte) (struct st_sensor_transfer_buffer *tb,
- struct device *dev, u8 reg_addr, int len, u8 *data,
- bool multiread_bit);
-};
-
/**
* struct st_sensor_settings - ST specific sensor settings
* @wai: Contents of WhoAmI register.
@@ -243,7 +214,6 @@ struct st_sensor_settings {
* @vdd: Pointer to sensor's Vdd power supply
* @vdd_io: Pointer to sensor's Vdd-IO power supply
* @enabled: Status of the sensor (false->off, true->on).
- * @multiread_bit: Use or not particular bit for [I2C/SPI] multiread.
* @buffer_data: Data used by buffer part.
* @odr: Output data rate of the sensor [Hz].
* num_data_channels: Number of data channels used in buffer.
@@ -264,9 +234,9 @@ struct st_sensor_data {
struct st_sensor_fullscale_avl *current_fullscale;
struct regulator *vdd;
struct regulator *vdd_io;
+ struct regmap *regmap;
bool enabled;
- bool multiread_bit;
char *buffer_data;
@@ -278,9 +248,6 @@ struct st_sensor_data {
unsigned int (*get_irq_data_ready) (struct iio_dev *indio_dev);
- const struct st_sensor_transfer_function *tf;
- struct st_sensor_transfer_buffer tb;
-
bool edge_irq;
bool hw_irq_trigger;
s64 hw_timestamp;
diff --git a/include/linux/iio/common/st_sensors_i2c.h b/include/linux/iio/common/st_sensors_i2c.h
index 5ada89944698..4d8f44d32ce9 100644
--- a/include/linux/iio/common/st_sensors_i2c.h
+++ b/include/linux/iio/common/st_sensors_i2c.h
@@ -14,8 +14,9 @@
#include <linux/iio/common/st_sensors.h>
#include <linux/of.h>
-void st_sensors_i2c_configure(struct iio_dev *indio_dev,
- struct i2c_client *client, struct st_sensor_data *sdata);
+int st_sensors_i2c_configure(struct iio_dev *indio_dev,
+ struct i2c_client *client,
+ bool multiread_bit);
#ifdef CONFIG_ACPI
int st_sensors_match_acpi_device(struct device *dev);
diff --git a/include/linux/iio/common/st_sensors_spi.h b/include/linux/iio/common/st_sensors_spi.h
index 6020f7167859..77c5f4d18cc6 100644
--- a/include/linux/iio/common/st_sensors_spi.h
+++ b/include/linux/iio/common/st_sensors_spi.h
@@ -13,7 +13,8 @@
#include <linux/spi/spi.h>
#include <linux/iio/common/st_sensors.h>
-void st_sensors_spi_configure(struct iio_dev *indio_dev,
- struct spi_device *spi, struct st_sensor_data *sdata);
+int st_sensors_spi_configure(struct iio_dev *indio_dev,
+ struct spi_device *spi,
+ bool multiread_bit);
#endif /* ST_SENSORS_SPI_H */
--
2.22.0
