Linux IIO Development

• Thread Index

• Re: [PATCH 2/3] iio: accel: adxl372: Fix push to buffers lost samples
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: accel: adxl372: Fix/remove limitation for FIFO samples
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH AUTOSEL 4.19 066/167] iio: adc: exynos-adc: Add S5PV210 variant
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 5/6] iio: imu: st_lsm6dsx: add motion report function and call from interrupt
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 6/6] iio: imu: st_lsm6dsx: prohibit the use of events and buffered reads simultaneously
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Custom sysfs entries for persistence, gain & threshold in light sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] iio: adc: hx711: remove unnecessary returns
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 2/3] iio: adc: hx711: remove unnecessary read cycle
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 1/3] iio: adc: hx711: optimize sampling of data
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 0/3] iio: adc: hx711: fix and optimize sampling of data
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH] iio: srf04: fix wrong limitation in distance measuring
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [RFC 5/9] dt-bindings: arm: samsung: Convert Exynos PMU bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 05/11] dt-bindings: arm: samsung: Document missing Exynos7 boards bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 04/11] dt-bindings: arm: samsung: Document missing S5Pv210 boards bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 02/11] dt-bindings: power: syscon-poweroff: Convert bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 10/11] dt-bindings: iio: adc: exynos: Convert Exynos ADC bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 11/11] dt-bindings: iio: adc: exynos: Remove old requirement of two register address ranges
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 09/11] dt-bindings: rtc: s3c: Convert S3C/Exynos RTC bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 07/11] dt-bindings: arm: samsung: Convert Exynos PMU bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 08/11] dt-bindings: arm: samsung: Convert Exynos System Registers bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 06/11] dt-bindings: arm: samsung: Convert Exynos Chipid bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 03/11] dt-bindings: arm: samsung: Convert Samsung board/soc bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 01/11] dt-bindings: power: syscon-reboot: Convert bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] [RFC] Revert "iio: hid-sensor-attributes: Convert to use int_pow()"
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] [RFC] Revert "iio: hid-sensor-attributes: Convert to use int_pow()"
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Custom sysfs entries for persistence, gain & threshold in light sensor
  • From: rishi gupta <gupt21@xxxxxxxxx>
• Re: [RFC 5/9] dt-bindings: arm: samsung: Convert Exynos PMU bindings to json-schema
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH] [RFC] Revert "iio: hid-sensor-attributes: Convert to use int_pow()"
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v4 2/6] iio: imu: st_lsm6dsx: add motion events
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v4 5/6] iio: imu: st_lsm6dsx: add motion report function and call from interrupt
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v4 2/6] iio: imu: st_lsm6dsx: add motion events
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v4 1/6] iio: imu: st_lsm6dsx: move interrupt thread to core
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v4 5/6] iio: imu: st_lsm6dsx: add motion report function and call from interrupt
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v4 6/6] iio: imu: st_lsm6dsx: prohibit the use of events and buffered reads simultaneously
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v4 4/6] iio: imu: st_lsm6dsx: always enter interrupt thread
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v4 3/6] iio: imu: st_lsm6dsx: add wakeup-source option
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v4 2/6] iio: imu: st_lsm6dsx: add motion events
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v4 1/6] iio: imu: st_lsm6dsx: move interrupt thread to core
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [kbuild-all] [staging:staging-testing 314/401] drivers/iio/common/hid-sensors/hid-sensor-attributes.c:312: undefined reference to `__udivdi3'
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [kbuild-all] [staging:staging-testing 314/401] drivers/iio/common/hid-sensors/hid-sensor-attributes.c:312: undefined reference to `__udivdi3'
  • From: "Chen, Rong A" <rong.a.chen@xxxxxxxxx>
• Re: [PATCH v1] iio: hid-sensor-attributes: Fix divisions for 32-bit platforms
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• Re: [PATCH v3 0/6] counter: new TI eQEP driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 0/6] counter: new TI eQEP driver
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v1] iio: hid-sensor-attributes: Fix divisions for 32-bit platforms
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [staging:staging-testing 314/401] drivers/iio/common/hid-sensors/hid-sensor-attributes.c:312: undefined reference to `__udivdi3'
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PULL v3] Second set of new device support, cleanups etc for IIO in the 5.4 cycle.
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v3 5/6] iio: imu: st_lsm6dsx: add motion report function and call from interrupt
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v3 5/6] iio: imu: st_lsm6dsx: add motion report function and call from interrupt
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v3 4/6] iio: imu: st_lsm6dsx: always enter interrupt thread
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v3 5/6] iio: imu: st_lsm6dsx: add motion report function and call from interrupt
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v3 4/6] iio: imu: st_lsm6dsx: always enter interrupt thread
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v3 4/6] iio: imu: st_lsm6dsx: always enter interrupt thread
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PULL v3] Second set of new device support, cleanups etc for IIO in the 5.4 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/6] iio: imu: st_lsm6dsx: add motion events
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PULL v3] Second set of new device support, cleanups etc for IIO in the 5.4 cycle.
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• Re: [PATCH] iio: adc: meson_saradc: Fix memory allocation order
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• Re: [PATCH v3 3/6] iio: imu: st_lsm6dsx: add wakeup-source option
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v3 2/6] iio: imu: st_lsm6dsx: add motion events
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v3 1/6] iio: imu: st_lsm6dsx: move interrupt thread to core
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v3 5/6] iio: imu: st_lsm6dsx: add motion report function and call from interrupt
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v3 6/6] iio: imu: st_lsm6dsx: prohibit the use of events and buffered reads simultaneously
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v3 4/6] iio: imu: st_lsm6dsx: always enter interrupt thread
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v3 2/6] iio: imu: st_lsm6dsx: add motion events
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v3 3/6] iio: imu: st_lsm6dsx: add wakeup-source option
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v3 1/6] iio: imu: st_lsm6dsx: move interrupt thread to core
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH 5/8 v2] mfd: ab8500: augment DT bindings
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PULL v3] Second set of new device support, cleanups etc for IIO in the 5.4 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL v2] Second set of new device support, cleanups etc for IIO in the 5.4 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL v3] Second set of new device support, cleanups etc for IIO in the 5.4 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH AUTOSEL 4.19 066/167] iio: adc: exynos-adc: Add S5PV210 variant
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PULL v2] Second set of new device support, cleanups etc for IIO in the 5.4 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: iio/adc: Add a compatible string for JZ4770 SoC ADC
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PULL v2] Second set of new device support, cleanups etc for IIO in the 5.4 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: replace underscore with hyphen in device name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/7 v3] mfd: ab8500: augment DT bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH AUTOSEL 4.19 066/167] iio: adc: exynos-adc: Add S5PV210 variant
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: adc: intel_mrfld_adc: Add Basin Cove ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: bh1750: Move static keyword to the front of declaration
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH V4 4/4] dt-bindings: iio: adc: ad7192: Add binding documentation for AD7192
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 068/167] iio: adc: exynos-adc: Use proper number of channels for Exynos4x12
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 066/167] iio: adc: exynos-adc: Add S5PV210 variant
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 155/167] iio: adc: gyroadc: fix uninitialized return code
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 067/167] dt-bindings: iio: adc: exynos-adc: Add S5PV210 variant
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH 5/7 v3] mfd: ab8500: augment DT bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 6/8 v3] iio: adc: New driver for the AB8500 GPADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 6/8 v2] iio: adc: New driver for the AB8500 GPADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 5/8 v2] mfd: ab8500: augment DT bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PULL] Second set of new device support, cleanups etc for IIO in the 5.4 cycle.
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PULL] Second set of new device support, cleanups etc for IIO in the 5.4 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 8/8 v2] ARM: dts: ux500: declare GPADC IIO ADC channels
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: replace underscore with hyphen in device name
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: replace underscore with hyphen in device name
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [BUG] Re: [PATCH] iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [RFC 5/9] dt-bindings: arm: samsung: Convert Exynos PMU bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 3/3] iio: accel: adxl372: Make sure interrupts are disabled
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH 2/3] iio: accel: adxl372: Fix push to buffers lost samples
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH 1/3] iio: accel: adxl372: Fix/remove limitation for FIFO samples
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• Re: [RFC 5/9] dt-bindings: arm: samsung: Convert Exynos PMU bindings to json-schema
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [RFC 5/9] dt-bindings: arm: samsung: Convert Exynos PMU bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [BUG] Re: [PATCH] iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: replace underscore with hyphen in device name
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH] iio: adc: meson_saradc: Fix memory allocation order
  • From: Elie Roudninski <xademax@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: accel: add binding documentation for ADIS16240
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v3 1/6] bus/ti-pwmss: move TI PWMSS driver from PWM to bus subsystem
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v3 2/6] dt-bindings: counter: new bindings for TI eQEP
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 0/6] counter: new TI eQEP driver
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] staging: iio: accel: adis16240: move out of staging
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: intel_mrfld_adc: Add Basin Cove ADC driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH V4 3/4] staging: iio: adc: ad7192: Add system calibration support
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH V4 1/4] iio: adc: ad7192: Add sysfs ABI documentation
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH V4 4/4] dt-bindings: iio: adc: ad7192: Add binding documentation for AD7192
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH V4 2/4] iio: adc: ad_sigma_delta: Export ad_sd_calibrate
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: accel: add binding documentation for ADIS16240
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [RFC 7/9] dt-bindings: rtc: s3c: Convert S3C/Exynos RTC bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] iio: light: bh1750: Move static keyword to the front of declaration
  • From: Krzysztof Wilczynski <kw@xxxxxxxxx>
• Re: [PATCH v2 1/1] counter: cros_ec: Add synchronization sensor
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 5/8 v2] mfd: ab8500: augment DT bindings
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RFC 1/9] dt-bindings: arm: samsung: Convert Samsung board/soc bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 2/2] staging: iio: accel: adis16240: move out of staging
  • From: Rodrigo Carvalho <rodrigorsdc@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: accel: add binding documentation for ADIS16240
  • From: Rodrigo Carvalho <rodrigorsdc@xxxxxxxxx>
• Re: [PATCH] counter: fix devm_platform_ioremap_resource.cocci warnings
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v3 2/6] dt-bindings: counter: new bindings for TI eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v3 0/6] counter: new TI eQEP driver
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v3 1/6] bus/ti-pwmss: move TI PWMSS driver from PWM to bus subsystem
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v3 3/6] counter: new TI eQEP driver
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v3 5/6] ARM: dts: am335x-boneblue: Enable eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v3 4/6] ARM: dts: am33xx: Add nodes for eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: WARNING in __mark_chain_precision (2)
  • From: syzbot <syzbot+c8d66267fd2b5955287e@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] iio: light: cm36651: redundant assignment to variable ret
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [BUG] Re: [PATCH] iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: meson_saradc: Fix memory allocation order
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH] iio: adc: meson_saradc: Fix memory allocation order
  • From: Remi Pommarel <repk@xxxxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: forbid 0 sensor sensitivity
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-binding: iio: Add optional label property
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [BUG] Re: [PATCH] iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [BUG] Re: [PATCH] iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH 1/2] dt-binding: iio: Add optional label property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [BUG] Re: [PATCH] iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [BUG] Re: [PATCH] iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH 1/2] dt-binding: iio: Add optional label property
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-binding: iio: Add optional label property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: read_raw endianess
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• read_raw endianess
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 6/8] iio: imu: inv_mpu6050: add magnetometer implementation for MPU925x
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• [PATCH 0/8] add magnetometer support for MPU925x
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• [PATCH 1/8] iio: imu: inv_mpu6050: disable i2c mux for 925x under Kconfig
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• [PATCH 2/8] iio: imu: inv_mpu6050: add header include protection macro
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• [PATCH 7/8] iio: imu: inv_mpu6050: add magnetometer support inside mpu driver
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• [PATCH 8/8] iio: imu: inv_mpu6050: add fifo support for magnetometer data
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• [PATCH 5/8] iio: imu: inv_mpu6050: helpers for using i2c master on auxiliary bus
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• [PATCH 4/8] iio: imu: inv_mpu6050: fix objects syntax in Makefile
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• [PATCH 3/8] iio: imu: inv_mpu6050: add defines for supporting 9-axis chips
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] counter: cros_ec: Add synchronization sensor
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v2 1/1] counter: cros_ec: Add synchronization sensor
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• Re: [BUG] Re: [PATCH] iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH] Revert "iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1"
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH v1 1/1] iio: fix center temperature of bmc150-accel-core
  • From: Pascal Bouwmann <bouwmann@xxxxxxxxxx>
• [BUG] Re: [PATCH] iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH 1/2] dt-binding: iio: Add optional label property
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• [PULL] Second set of new device support, cleanups etc for IIO in the 5.4 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: rely on IIO_G_TO_M_S_2 for gain definition for LSM9DS1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: cros_ec: set calibscale for 3d MEMS to unit vector
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad5380: fix incorrect assignment to val
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/4] iio: imu: st_lsm6sdx: move register definitions to sensor_settings struct
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/4] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/4] iio: imu: st_lsm6dsx: introduce update_fifo function pointer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/4] iio: imu: st_lsm6sdx: move register definitions to sensor_settings struct
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 4/4] dt-bindings: iio: imu: st_lsm6dsx: add lsm9ds1 device bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 4/4] dt-bindings: iio: imu: st_lsm6dsx: add lsm9ds1 device bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: rely on IIO_G_TO_M_S_2 for gain definition for LSM9DS1
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v5 2/4] iio: imu: st_lsm6sdx: move register definitions to sensor_settings struct
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH 4/4] iio: adc: ina2xx: Use label proper for device identification
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-binding: iio: Add optional label property
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: adc: ina2xx: Use label proper for device identification
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH 0/2] iio: core: Add optional symbolic label to device attributes
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH 2/2] iio: core: Add optional symbolic label to device attributes
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH 1/2] dt-binding: iio: Add optional label property
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v2] iio: cros_ec: set calibscale for 3d MEMS to unit vector
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [RFC 7/9] dt-bindings: rtc: s3c: Convert S3C/Exynos RTC bindings to json-schema
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [RFC 5/9] dt-bindings: arm: samsung: Convert Exynos PMU bindings to json-schema
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [RFC 1/9] dt-bindings: arm: samsung: Convert Samsung board/soc bindings to json-schema
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: Add ADE9000 driver to staging:iio:meter?
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging:iio:meter add driver for ADE9000
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: Fix FIFO diff mask for tagged fifo
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/1] counter: cros_ec: Add synchronization sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 8/8 v2] ARM: dts: ux500: declare GPADC IIO ADC channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/8 v2] iio: adc: New driver for the AB8500 GPADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Linux Kernel: Bug in the bmc150 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: Fix FIFO diff mask for tagged fifo
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: Fix FIFO diff mask for tagged fifo
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH -next] iio: st_sensors: Fix build error
  • From: Yuehaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH] iio: cros_ec: set calibscale for 3d MEMS to unit vector
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: light: isl29501: Rename bindings documentation file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Kconfig: Fix the reference to the RFD77402 ToF sensor in the 'help' section
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: adc: ina2xx: Use label proper for device identification
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH -next] iio: st_sensors: Fix build error
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/4] dt-bindings: iio: adc: Add AD7606B ADC documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/4] dt-bindings: iio: adc: Migrate AD7606 documentation to yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/4] MAINTAINERS: Add Beniamin Bia for AD7606 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/4] iio: adc: ad7606: Add support for AD7606B ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/1] counter: cros_ec: Add synchronization sensor
  • From: kbuild test robot <lkp@xxxxxxxxx>
• RE: buffer read
  • From: "Grim, Dennis" <Dennis.Grim@xxxxxxxxxx>
• Re: buffer read
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• buffer read
  • From: "Grim, Dennis" <Dennis.Grim@xxxxxxxxxx>
• [PATCH v2 1/1] counter: cros_ec: Add synchronization sensor
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• [PATCH v2 0/1] counter: cros_ec: Add sync sensor driver
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• [RFC 9/9] ARM: dts: exynos: Remove not accurate secondary ADC compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC 8/9] dt-bindings: iio: adc: exynos: Convert Exynos ADC bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC 7/9] dt-bindings: rtc: s3c: Convert S3C/Exynos RTC bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC 6/9] dt-bindings: arm: samsung: Convert Exynos System Registers bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC 5/9] dt-bindings: arm: samsung: Convert Exynos PMU bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC 4/9] dt-bindings: arm: samsung: Convert Exynos Chipid bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC 3/9] dt-bindings: arm: samsung: Document missing Exynos7 boards bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC 2/9] dt-bindings: arm: samsung: Document missing S5Pv210 boards bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC 1/9] dt-bindings: arm: samsung: Convert Samsung board/soc bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH -next] iio: st_sensors: Fix build error
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH 7/8 v2] mfd: Switch the AB8500 GPADC to IIO
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 8/8 v2] ARM: dts: ux500: declare GPADC IIO ADC channels
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 6/8 v2] iio: adc: New driver for the AB8500 GPADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 5/8 v2] mfd: ab8500: augment DT bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 4/8 v2] hwmon: ab8500: convert to IIO ADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 3/8 v2] power: supply: ab8500_fg: convert to IIO ADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/8 v2] power: supply: ab8500_charger: convert to IIO ADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/8 v2] power: supply: ab8500_btemp: convert to IIO ADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 0/8 v2] AB8500 GPADC MFD to IIO conversion
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: Fix FIFO diff mask for tagged fifo
  • From: Mario Tesi <martepisa@xxxxxxxxx>
• Re: iio: Is storing output values to non volatile registers something we should do automatically or leave to userspace action. [was Re: [PATCH] iio: potentiometer: max5432: update the non-volatile position]
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v2 1/1] iio: core: Fix fractional format generation
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/5] dt-bindings: counter: new bindings for TI eQEP
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: iio: adc: Add AD7606B ADC documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 3/4] dt-bindings: iio: adc: Migrate AD7606 documentation to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/1] iio: core: Fix fractional format generation
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 1/1] iio: core: Fix fractional format generation
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/4] MAINTAINERS: Add Beniamin Bia for AD7606 driver
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v3 1/4] iio: adc: ad7606: Add support for AD7606B ADC
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v3 3/4] dt-bindings: iio: adc: Migrate AD7606 documentation to yaml
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v3 4/4] dt-bindings: iio: adc: Add AD7606B ADC documentation
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v5 1/4] iio: imu: st_lsm6dsx: introduce update_fifo function pointer
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH v5 4/4] dt-bindings: iio: imu: st_lsm6dsx: add lsm9ds1 device bindings
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH v5 3/4] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH v5 2/4] iio: imu: st_lsm6sdx: move register definitions to sensor_settings struct
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH v5 0/4] iio: imu: st_lsm6dsx: Add support for LSM9DS1
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH] iio: adc: max9611: Fix temperature reading in probe
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH] iio: adc: max9611: Fix temperature reading in probe
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] iio: imu: st_lsm6dsx: add motion events
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: adc: ina2xx: Use label proper for device identification
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: adc: ina2xx: Setup better name then simple ina2xx
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: adc: ina2xx: Use label proper for device identification
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] iio: adc: ina2xx: Setup better name then simple ina2xx
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] iio: adc: ina2xx: Define *device_node only once
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: read buffer
  • From: Paul Thomas <pthomas8589@xxxxxxxxx>
• read buffer
  • From: "Grim, Dennis" <Dennis.Grim@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH 4/4] iio: adc: ina2xx: Use label proper for device identification
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• [PATCH 2/4] iio: adc: ina2xx: Setup better name then simple ina2xx
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• [PATCH 1/4] iio: adc: ina2xx: Define *device_node only once
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• [PATCH 0/4] iio: adc: ina2xx: Improve device identification
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 13/27] iio: adc: max9611: Fix temperature reading in probe
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 20/44] iio: adc: max9611: Fix temperature reading in probe
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 02/12] iio: adc: max9611: Fix temperature reading in probe
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH] iio: cros_ec: set calibscale for 3d MEMS to unit vector
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2] dt-bindings: iio: light: isl29501: Rename bindings documentation file
  • From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: light: isl29501: Rename bindings documentation file
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH] dt-bindings: iio: light: isl29501: Rename bindings documentation file
  • From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: introduce update_fifo function pointer
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: introduce update_fifo function pointer
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: introduce update_fifo function pointer
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v4 1/3] iio: imu: st_lsm6sdx: move register definitions to sensor_settings struct
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 2/2] irq/irq_sim: use irq domain
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH] Kconfig: Fix the reference to the RFD77402 ToF sensor in the 'help' section
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v1] iio: hid-sensor-attributes: Convert to use int_pow()
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• Re: [PATCH] iio: adc: sc27xx: Change to polling mode to read data
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: [PATCH] tools: iio: add .gitignore
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] irq/irq_sim: use irq domain
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] irq/irq_sim: make the irq_sim structure opaque
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] irq/irq_sim: make the irq_sim structure opaque
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: iio: Is storing output values to non volatile registers something we should do automatically or leave to userspace action. [was Re: [PATCH] iio: potentiometer: max5432: update the non-volatile position]
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: sc27xx: Change to polling mode to read data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1] iio: hid-sensor-attributes: Convert to use int_pow()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: max1027: Use device-managed APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] staging: iio: accel: adis16240: Improve readability on write_raw function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 0/3] iio: imu: st_lsm6dsx: Add support for LSM9DS1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3 4/4] dt-bindings: iio: adc: ad7192: Add binding documentation for AD7192
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V3 4/4] dt-bindings: iio: adc: ad7192: Add binding documentation for AD7192
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3 1/4] staging: iio: adc: ad7192: Add low_pass_3db_filter_frequency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3 2/4] iio: adc: ad_sigma_delta: Export ad_sd_calibrate
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3 3/4] staging: iio: adc: ad7192: Add system calibration support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: adc: ad7192: Remove platform data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad5380: fix incorrect assignment to val
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: adis16460: fix variable signedness
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: kxcjk1013: Improve comments on KIOX010A and KIOX020A ACPI ids
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: max5481: use devres for iio device registration
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH][iio-next] iio: light: noa1305: fix missing break in a switch statement
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: accel: kxcjk1013: Improve comments on KIOX010A and KIOX020A ACPI ids
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 13/14] iio: trig-loop: SPDX headers GPL-v2
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 13/14] iio: trig-loop: SPDX headers GPL-v2
  • From: J Lovejoy <opensource@xxxxxxxxxxx>
• [PATCH] iio: imu: adis16460: fix variable signedness
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad5380: fix incorrect assignment to val
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2 3/5] counter: new TI eQEP driver
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: static analysis bug report in drivers/staging/iio/dac/ad5380.c
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] iio: dac: ad5380: fix incorrect assignment to val
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• static analysis bug report in drivers/staging/iio/dac/ad5380.c
  • From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
• [bug report] iio: imu: Add support for the ADIS16460 IMU
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH][iio-next] iio: light: noa1305: fix missing break in a switch statement
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH V3 4/4] dt-bindings: iio: adc: ad7192: Add binding documentation for AD7192
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH] iio: max5487: use devres for iio device registration
  • From: Martin Kaiser <martin@xxxxxxxxx>
• [PATCH] iio: max5481: use devres for iio device registration
  • From: Martin Kaiser <martin@xxxxxxxxx>
• [PATCH] staging:iio:meter add driver for ADE9000
  • From: Leonard Pollak <leonardp@xxxxxxxxxx>
• [PATCH V3 4/4] dt-bindings: iio: adc: ad7192: Add binding documentation for AD7192
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH V3 3/4] staging: iio: adc: ad7192: Add system calibration support
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH V3 2/4] iio: adc: ad_sigma_delta: Export ad_sd_calibrate
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH V3 1/4] staging: iio: adc: ad7192: Add low_pass_3db_filter_frequency
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• Re: [PATCH v2] staging: iio: accel: adis16240: Improve readability on write_raw function
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 008/123] IIO: Ingenic JZ47xx: Set clock divider on probe
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 010/123] iio: imu: mpu6050: add missing available scan masks
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 009/123] iio: cros_ec_accel_legacy: Fix incorrect channel setting
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 01/68] iio: adc: max9611: Fix misuse of GENMASK macro
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 02/68] iio: cros_ec_accel_legacy: Fix incorrect channel setting
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 01/44] iio: adc: max9611: Fix misuse of GENMASK macro
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 007/123] iio: adc: max9611: Fix misuse of GENMASK macro
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH V2 4/4] dt-bindings: iio: adc: ad7192: Add binding documentation for AD7192
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH v2] staging: iio: accel: adis16240: Improve readability on write_raw function
  • From: Rodrigo Ribeiro <rodrigorsdc@xxxxxxxxx>
• Re: [PATCH] iio:light:noa1305: Fix missing break statement.
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH v1] iio: hid-sensor-attributes: Convert to use int_pow()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio:light:noa1305: Fix missing break statement.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL] First set of new device support, cleanups and features for IIO in the 5.4 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] iio:light:noa1305: Fix missing break statement.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PULL] First set of new device support, cleanups and features for IIO in the 5.4 cycle.
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Add ADE9000 driver to staging:iio:meter?
  • From: "Pollak, Leonard" <pollak@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: ftm-quaddec: Fix typo in a filepath
  • From: Patrick Havelange <patrick.havelange@xxxxxxxxxxxxx>
• Re: [PULL] First set of new device support, cleanups and features for IIO in the 5.4 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH V2 4/4] dt-bindings: iio: adc: ad7192: Add binding documentation for AD7192
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH V2 1/4] staging: iio: adc: ad7192: Add low_pass_3db_filter_frequency
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH V2 2/4] iio: adc: ad_sigma_delta: Export ad_sd_calibrate
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH V2 3/4] staging: iio: adc: ad7192: Add system calibration support
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH v4 3/3] dt-bindings: iio: imu: st_lsm6dsx: add lsm9ds1 device bindings
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH v4 2/3] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH v4 1/3] iio: imu: st_lsm6sdx: move register definitions to sensor_settings struct
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH v4 0/3] iio: imu: st_lsm6dsx: Add support for LSM9DS1
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH] MAINTAINERS: ftm-quaddec: Fix typo in a filepath
  • From: Denis Efremov <efremov@xxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: Add pixart vendor
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PULL] First set of new device support, cleanups and features for IIO in the 5.4 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL] Second set of IIO fixes for the 5.3 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PULL] First set of new device support, cleanups and features for IIO in the 5.4 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] Second set of IIO fixes for the 5.3 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] dt-bindings: iio: adc: ad7192: Add binding documentation for AD7192
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH 2/2] irq/irq_sim: use irq domain
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 1/2] irq/irq_sim: make the irq_sim structure opaque
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 0/2] irq/irq_sim: try to improve the API
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH] tools: iio: add .gitignore
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: ina226 as IIO device instead of HWMON
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: iio: Is storing output values to non volatile registers something we should do automatically or leave to userspace action. [was Re: [PATCH] iio: potentiometer: max5432: update the non-volatile position]
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: iio: Is storing output values to non volatile registers something we should do automatically or leave to userspace action. [was Re: [PATCH] iio: potentiometer: max5432: update the non-volatile position]
  • From: Martin Kaiser <martin@xxxxxxxxx>
• [PATCH 1/4] staging: iio: adc: ad7192: Add low_pass_3db_filter_frequency
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH 3/4] staging: iio: adc: ad7192: Add system calibration support
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH 4/4] dt-bindings: iio: adc: ad7192: Add binding documentation for AD7192
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH 2/4] iio: adc: ad_sigma_delta: Export ad_sd_calibrate
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH] staging: iio: adc: ad7192: Remove platform data
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• Re: [PATCH] staging: iio: accel: adis16240: Improve readability on write_raw function
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH] iio: adc: sc27xx: Change to polling mode to read data
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: [PATCH v2 3/5] counter: new TI eQEP driver
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH] staging: iio: accel: adis16240: Improve readability on write_raw function
  • From: Rodrigo Ribeiro <rodrigorsdc@xxxxxxxxx>
• [PATCH v2] iio: adc: max1027: Use device-managed APIs
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH] iio: adc: max1027: Use device-managed APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/5] counter: new TI eQEP driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• iio: Is storing output values to non volatile registers something we should do automatically or leave to userspace action. [was Re: [PATCH] iio: potentiometer: max5432: update the non-volatile position]
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hi8435: Drop hi8435_remove()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hi8435: Use gpiod_set_value_cansleep()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: accel: adis16240: Improve readability on write_raw function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: bme680: Fix pressure and humidity ABI mismatch
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:st_sensors: remove buffer allocation at each buffer enable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: max9611: Fix temperature reading in probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: sc27xx: Change to polling mode to read data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: hi8435: Drop hi8435_remove()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] iio: hi8435: Use gpiod_set_value_cansleep()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] staging: iio: accel: adis16240: Improve readability on write_raw function
  • From: Rodrigo <rodrigorsdc@xxxxxxxxx>
• [PATCH] iio: potentiometer: max5432: update the non-volatile position
  • From: Martin Kaiser <martin@xxxxxxxxx>
• Re: ina226 as IIO device instead of HWMON
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: ina226 as IIO device instead of HWMON
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: ina226 as IIO device instead of HWMON
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 3/6] iio: imu: st_lsm6dsx: add motion events
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• ina226 as IIO device instead of HWMON
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• [PATCH] counter: fix devm_platform_ioremap_resource.cocci warnings
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• [PATCH] iio: chemical: bme680: Fix pressure and humidity ABI mismatch
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH v2 1/4] iio: adc: ad7606: Add support for AD7606B ADC
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v2 3/5] counter: new TI eQEP driver
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v2 0/5] counter: new TI eQEP driver
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v2 3/5] counter: new TI eQEP driver
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v2 4/5] ARM: dts: am33xx: Add nodes for eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v2 2/5] dt-bindings: counter: new bindings for TI eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v2 5/5] ARM: dts: am335x-boneblue: Enable eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v2 1/5] bus/ti-pwmss: move TI PWMSS driver from PWM to bus subsystem
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: iio: adc: Add AD7606B ADC documentation
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: adc: ad7606: Add support for AD7606B ADC
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH] media: uvcvideo: Add boottime clock support
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• [PATCH v2 3/4] dt-bindings: iio: adc: Migrate AD7606 documentation to yaml
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v2 4/4] dt-bindings: iio: adc: Add AD7606B ADC documentation
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v2 1/4] iio: adc: ad7606: Add support for AD7606B ADC
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v2 2/4] MAINTAINERS: Add Beniamin Bia for AD7606 driver
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• Re: [PATCH] iio: imu: inv_mpu6050: add header include protection macro
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH] media: uvcvideo: Add boottime clock support
  • From: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: imu: inv_mpu6050: add header include protection macro
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: sc27xx: Change to polling mode to read data
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: [PATCH] iio: adc: max9611: Fix temperature reading in probe
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH] media: uvcvideo: Add boottime clock support
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• [PATCH] iio:st_sensors: remove buffer allocation at each buffer enable
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• RE: [PATCH 1/5] iio:common: introduce st_sensors_buffer_preenable/predisable functions
  • From: Denis CIOCCA <denis.ciocca@xxxxxx>
• RE: [PATCH 1/5] iio:common: introduce st_sensors_buffer_preenable/predisable functions
  • From: Denis CIOCCA <denis.ciocca@xxxxxx>
• Re: [PATCH] iio: adc: max9611: Fix temperature reading in probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: frequency: adf4371: Fix output frequency setting
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: inv_mpu6050: add header include protection macro
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: imu: inv_mpu6050: be more explicit on supported chips
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: Add binding document for NOA1305
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: light: noa1305: Add support for NOA1305
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: adc: max9611: Fix temperature reading in probe
  • From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
• Re: [PATCH] iio: remove get_irq_data_ready() function pointer and use IRQ number directly
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: adc: ad7606: Add support for AD7606B ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: make IIO_CHAN_INFO_SCALE shared by type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/5] iio:common: introduce st_sensors_buffer_preenable/predisable functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/4] iio: tsl2772: Use regulator_bulk_() APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/4] iio: tsl2772: Use devm_iio_device_register
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/4] iio: tsl2772: Use devm_add_action_or_reset for tsl2772_chip_off
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/4] iio: tsl2772: Use devm_add_action_or_reset
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/5] iio:common: introduce st_sensors_buffer_preenable/predisable functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: make IIO_CHAN_INFO_SCALE shared by type
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: tsl2772: Use device-managed API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 19/57] iio: Remove dev_err() usage after platform_get_irq()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 19/57] iio: Remove dev_err() usage after platform_get_irq()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: light: si1145: Use device-managed APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: frequency: adf4371: Fix output frequency setting
  • From: "Popa, Stefan Serban" <StefanSerban.Popa@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio:pressure: preenable/postenable/predisable fixup for ST press buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio:gyro: preenable/postenable/predisable fixup for ST gyro buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio:magn: preenable/postenable/predisable fixup for ST magn buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio:accel: preenable/postenable/predisable fixup for ST accel buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add ism330dhcx device bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: imu: st_lsm6dsx: add support to ISM330DHCX
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: make IIO_CHAN_INFO_SCALE shared by type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: imu: st_lsm6dsx: move iio chan definitions in st_lsm6dsx_sensor_settings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: imu: st_lsm6dsx: inline output acc/gyro output regs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: imu: st_lsm6dsx: move fs_table in st_lsm6dsx_sensor_settings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: light: cm3323: Use device-managed APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: sc27xx: Change to polling mode to read data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/5] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: frequency: adf4371: Fix output frequency setting
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: iio: potentiometer: add max5432.yaml binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: potentiometer: add a driver for Maxim 5432-5435
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: imu: inv_mpu6050: be more explicit on supported chips
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• [PATCH] iio: imu: inv_mpu6050: add header include protection macro
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add ism330dhcx device bindings
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 1/2] iio: imu: st_lsm6dsx: add support to ISM330DHCX
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 0/2] add support to STM ISM330DHCX 6-axis Mems sensor
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH] iio: remove get_irq_data_ready() function pointer and use IRQ number directly
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• Re: [PATCH 2/4] counter: new TI eQEP driver
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 2/4] counter: new TI eQEP driver
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] counter: new TI eQEP driver
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: counter: new bindings for TI eQEP
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: iio: adc: Migrate AD7606 documentation to yaml
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: counter: new bindings for TI eQEP
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH v4 2/2] iio: light: noa1305: Add support for NOA1305
  • From: Martyn Welch <martyn.welch@xxxxxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: Add binding document for NOA1305
  • From: Martyn Welch <martyn.welch@xxxxxxxxxxxxx>
• [PATCH 4/4] dt-bindings: iio: adc: Add AD7606B ADC documentation
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH 3/4] dt-bindings: iio: adc: Migrate AD7606 documentation to yaml
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH 2/4] MAINTAINERS: Add Beniamin Bia for AD7606 driver
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH 1/4] iio: adc: ad7606: Add support for AD7606B ADC
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• Re: [PATCH 2/4] counter: new TI eQEP driver
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: counter: new bindings for TI eQEP
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v2 4/4] iio: imu: st_lsm6dsx: move iio chan definitions in st_lsm6dsx_sensor_settings
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH v2 3/4] iio: imu: st_lsm6dsx: inline output acc/gyro output regs
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH 0/4] new driver for TI eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: make IIO_CHAN_INFO_SCALE shared by type
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH 3/3][V4] dt-bindings: iio: imu: add bindings for ADIS16460
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v4 1/4] iio: tsl2772: Use devm_add_action_or_reset
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/4] iio: tsl2772: Use devm_add_action_or_reset for tsl2772_chip_off
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/4] iio: tsl2772: Use devm_add_action_or_reset
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH 5/5] iio:pressure: do not allocate/de-allocate buffer here but link setup_ops to st_sensors_buffer
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 4/5] iio:magn: do not allocate/de-allocate buffer here but link setup_ops to st_sensors_buffer
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 3/5] iio:gyro: do not allocate/de-allocate buffer here but link setup_ops to st_sensors_buffer
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 2/5] iio:accel: do not allocate/de-allocate buffer here but link setup_ops to st_sensors_buffer
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 1/5] iio:common: introduce st_sensors_buffer_preenable/predisable functions
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 0/5] move buffer allocation into st_sensors_buffer
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio:accel: preenable/postenable/predisable fixup for ST accel buffer
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio:pressure: preenable/postenable/predisable fixup for ST press buffer
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio:magn: preenable/postenable/predisable fixup for ST magn buffer
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio:gyro: preenable/postenable/predisable fixup for ST gyro buffer
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v4 4/4] iio: tsl2772: Use regulator_bulk_() APIs
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• [PATCH v4 3/4] iio: tsl2772: Use devm_iio_device_register
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• [PATCH v4 2/4] iio: tsl2772: Use devm_add_action_or_reset for tsl2772_chip_off
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• [PATCH v4 1/4] iio: tsl2772: Use devm_add_action_or_reset
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH v6 19/57] iio: Remove dev_err() usage after platform_get_irq()
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/6] ReST conversion patches not applied yet
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 5/5] iio:pressure: do not allocate/de-allocate buffer here but link setup_ops to st_sensors_buffer
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH 3/5] iio:gyro: do not allocate/de-allocate buffer here but link setup_ops to st_sensors_buffer
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH 4/5] iio:magn: do not allocate/de-allocate buffer here but link setup_ops to st_sensors_buffer
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH 2/5] iio:accel: do not allocate/de-allocate buffer here but link setup_ops to st_sensors_buffer
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH 1/5] iio:common: introduce st_sensors_buffer_preenable/predisable functions
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH 0/5] move buffer allocation into st_sensors_buffer
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH v2 4/4] iio:pressure: preenable/postenable/predisable fixup for ST press buffer
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH v2 3/4] iio:magn: preenable/postenable/predisable fixup for ST magn buffer
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH v2 2/4] iio:gyro: preenable/postenable/predisable fixup for ST gyro buffer
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH v2 1/4] iio:accel: preenable/postenable/predisable fixup for ST accel buffer
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH v2 0/4] preenable/postenable/predisable fixup for ST drivers
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• RE: [PATCH 4/4] iio:pressure: preenable/postenable/predisable fixup for ST press buffer
  • From: Denis CIOCCA <denis.ciocca@xxxxxx>
• Re: [PATCH 0/6] ReST conversion patches not applied yet
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• Re: [PATCH 0/6] ReST conversion patches not applied yet
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/6] ReST conversion patches not applied yet
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• Re: [PATCH 0/6] ReST conversion patches not applied yet
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/6] ReST conversion patches not applied yet
  • From: Jonathan Corbet <corbet@xxxxxxx>
• [PATCH 3/6] spi: docs: convert to ReST and add it to the kABI bookset
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH 0/6] ReST conversion patches not applied yet
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: iio: potentiometer: add max5432.yaml binding
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v6 19/57] iio: Remove dev_err() usage after platform_get_irq()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH v4 2/2] dt-bindings: iio: potentiometer: add max5432.yaml binding
  • From: Martin Kaiser <martin@xxxxxxxxx>
• [PATCH v4 1/2] iio: potentiometer: add a driver for Maxim 5432-5435
  • From: Martin Kaiser <martin@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: tsl2772: Use regulator_bulk_() APIs
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: tsl2772: Use regulator_bulk_() APIs
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: tsl2772: Use device-managed API
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH 04/12] iio: adc: max9611: Fix misuse of GENMASK macro
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH 4/4] iio:pressure: preenable/postenable/predisable fixup for ST press buffer
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v6 19/57] iio: Remove dev_err() usage after platform_get_irq()
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v3 2/2] iio: tsl2772: Use regulator_bulk_() APIs
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• [PATCH v3 1/2] iio: tsl2772: Use device-managed API
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH v5 13/29] compat_ioctl: move more drivers to compat_ptr_ioctl
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH v5 13/29] compat_ioctl: move more drivers to compat_ptr_ioctl
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH v6 19/57] iio: Remove dev_err() usage after platform_get_irq()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• RE: [PATCH 4/4] iio:pressure: preenable/postenable/predisable fixup for ST press buffer
  • From: Denis CIOCCA <denis.ciocca@xxxxxx>
• Re: [PATCH 2/4] counter: new TI eQEP driver
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] counter: new TI eQEP driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] preenable/postenable/predisable fixup for ST drivers
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 4/4] iio:pressure: preenable/postenable/predisable fixup for ST press buffer
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 3/4] iio:magn: preenable/postenable/predisable fixup for ST magn buffer
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 2/4] iio:gyro: preenable/postenable/predisable fixup for ST gyro buffer
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 1/4] iio:accel: preenable/postenable/predisable fixup for ST accel buffer
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 0/4] new driver for TI eQEP
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH 4/4] iio:pressure: preenable/postenable/predisable fixup for ST press buffer
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH 3/4] iio:magn: preenable/postenable/predisable fixup for ST magn buffer
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH 2/4] iio:gyro: preenable/postenable/predisable fixup for ST gyro buffer
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH 1/4] iio:accel: preenable/postenable/predisable fixup for ST accel buffer
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH 0/4] preenable/postenable/predisable fixup for ST drivers
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: potentiometer: add max5432.yaml binding
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 3/3][V4] dt-bindings: iio: imu: add bindings for ADIS16460
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 04/12] iio: adc: max9611: Fix misuse of GENMASK macro
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• [PATCH v2 4/4] iio: imu: st_lsm6dsx: move iio chan definitions in st_lsm6dsx_sensor_settings
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2 3/4] iio: imu: st_lsm6dsx: inline output acc/gyro output regs
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2 2/4] iio: imu: st_lsm6dsx: move fs_table in st_lsm6dsx_sensor_settings
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2 1/4] iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2 0/4] st_lsm6dsx: move {odr,fs}_table in
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] iio: tsl2772: Use device-managed API
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH] iio: tsl2772: Use device-managed API
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH v2] iio: tsl2772: Use device-managed API
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH v2] counter/ftm-quaddec: Use device-managed registration API
  • From: Patrick Havelange <patrick.havelange@xxxxxxxxxxxxx>
• [PATCH v3 2/2] dt-bindings: iio: potentiometer: add max5432.yaml binding
  • From: Martin Kaiser <martin@xxxxxxxxx>
• [PATCH v3 1/2] iio: potentiometer: add a driver for Maxim 5432-5435
  • From: Martin Kaiser <martin@xxxxxxxxx>
• Re: [PATCH] iio: tsl2772: Use device-managed API
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v2] iio: tsl2772: Use device-managed API
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2] iio: tsl2772: Use device-managed API
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH] iio: tsl2772: Use device-managed API
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] ARM: dts: stm32: add syscfg to ADC on stm32mp157c
  • From: Alexandre Torgue <alexandre.torgue@xxxxxx>
• Re: [PATCH] iio: tsl2772: Use device-managed API
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH] iio: adc: sc27xx: Change to polling mode to read data
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• [PATCH v2] iio: light: si1145: Use device-managed APIs
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH v3 4/5] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH AUTOSEL 4.4 17/35] iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH AUTOSEL 4.14 19/60] iio:core: Fix bug in length of event info_mask and catch unhandled bits set in masks.
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH v2] iio: light: cm3323: Use device-managed APIs
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH v2 02/10] iio: document bindings for mounting matrices
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: dummy_evgen: check iio_evgen in iio_dummy_evgen_free()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] First set of IIO fixes for 5.3
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PULL] First set of IIO fixes for 5.3
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: Use device-managed APIs
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: iio/adc: Add a compatible string for JZ4770 SoC ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/5] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: tsl2772: Use device-managed API
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH 4/5] iio: adc: ad7606: Add support for software mode for ad7616
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/5] iio: adc: ad7606: Move spi dependent features to spi file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/5] iio: adc: ad7606: Move common channel definition to header
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/5] iio: adc: ad7606: Allow reconfigration after reset
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/5] iio: adc: ad7606: Add debug mode for ad7616
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 02/10] iio: document bindings for mounting matrices
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/5] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH v5 1/1] iio: common: cros_ec_sensors: Expose cros_ec_sensors frequency range via iio sysfs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/4] iio: cros_ec: Add sign vector in core for backward compatibility
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 3/4] iio: cros_ec_accel_legacy: Use cros_ec_sensors_core
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/4] iio: cros_ec_accel_legacy: Fix incorrect channel setting
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/4] iio: cros_ec: Add sign vector in core for backward compatibility
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/1] iio: common: cros_ec_sensors: determine protocol version
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: cros_ec: Remove replacing error code with -EIO
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: imu: mpu6050: add missing available scan masks
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] counter/ftm-quaddec: Use device-managed registration API
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: flip irq return logic
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/6] iio: imu: st_lsm6dsx: add motion events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] [v2] iio: adc: gyroadc: fix uninitialized return code
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: potentiometer: add a driver for Maxim 5432-5435
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: mmc35240: Fix a typo in the name of a constant
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 3/3] IIO: Ingenic JZ47xx: Add support for JZ4770 SoC ADC.
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: iio/adc: Add AUX2 channel idx for JZ4770 SoC ADC
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: iio/adc: Add a compatible string for JZ4770 SoC ADC
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] iio: pressure: hp03: convert to i2c_new_dummy_device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: light: veml6070: convert to i2c_new_dummy_device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: light: cm36651: convert to i2c_new_dummy_device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: counter: new bindings for TI eQEP
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] new driver for TI eQEP
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3][V4] dt-bindings: iio: imu: add bindings for ADIS16460
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3][V4] iio: imu: Add support for the ADIS16460 IMU
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3][V4] iio: imu: adis: Add support for SPI transfer cs_change_delay
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] counter/ftm-quaddec: Use device-managed registration API
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v3 4/5] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: sc27xx: Change to polling mode to read data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: mxc4005: Use device-managed APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: humidity: Use device-managed APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: Use device-managed APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: ad2s1210: Use device-managed API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: maxim_thermocouple: Use device-managed APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging:iio:adc:ad7280a: add of_match_table entry
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: light: noa1305: Add support for NOA1305
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] counter/ftm-quaddec: Use device-managed registration API
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/7] docs: generic-counter.rst: fix broken references for ABI file
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: tsl2772: Use device-managed API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v3 4/5] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH v3 2/2] iio: light: noa1305: Add support for NOA1305
  • From: Martyn Welch <martyn.welch@xxxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: Add binding document for NOA1305
  • From: Martyn Welch <martyn.welch@xxxxxxxxxxxxx>
• Re: [PATCH] staging:iio:adc:ad7280a: add of_match_table entry
  • From: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
• Re: [PATCH 0/5] Add missing vdda-supply to STM32 ADC
  • From: Alexandre Torgue <alexandre.torgue@xxxxxx>
• [PATCH v2] counter/ftm-quaddec: Use device-managed registration API
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH v2] counter/ftm-quaddec: Use device-managed registration API
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH v2 00/26] ReST conversion of text files without .txt extension
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH v2 00/26] ReST conversion of text files without .txt extension
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH v2 08/26] spi: docs: convert to ReST and add it to the kABI bookset
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• Re: [PATCH v2] counter/ftm-quaddec: Use device-managed registration API
  • From: Patrick Havelange <patrick.havelange@xxxxxxxxxxxxx>
• Re: [PATCH] staging: iio: ad2s1210: Use device-managed API
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH] iio: tsl2772: Use device-managed API
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• [PATCH 2/7] docs: generic-counter.rst: fix broken references for ABI file
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH] staging: iio: ad2s1210: Use device-managed API
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• [PATCH] iio: maxim_thermocouple: Use device-managed APIs
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• [PATCH] iio: light: Use device-managed APIs
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• [PATCH] iio: humidity: Use device-managed APIs
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• [PATCH] iio: mxc4005: Use device-managed APIs
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH] staging:iio:adc:ad7280a: add of_match_table entry
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v2] counter/ftm-quaddec: Use device-managed registration API
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH 0/4] new driver for TI eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH] staging:iio:adc:ad7280a: add of_match_table entry
  • From: Kartik Kulkarni <kartik.koolks@xxxxxxxxx>
• [PATCH] staging:iio:adc:ad7280a: add of_match_table entry
  • From: Kartik Kulkarni <kartik.koolks@xxxxxxxxx>
• Re: [PATCH 0/4] new driver for TI eQEP
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] counter/ftm-quaddec: Use device-managed registration API
  • From: Patrick Havelange <patrick.havelange@xxxxxxxxxxxxx>
• [PATCH] counter/ftm-quaddec: Use device-managed registration API
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH v3 4/5] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH] iio: adc: sc27xx: Change to polling mode to read data
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: imu: st_lsm6sdx: move some register definitions to sensor_settings struct
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCH 0/3] st_lsm6dsx: move {odr,fs}_table in
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH v3 2/5] iio: imu: st_lsm6dsx: move fs_table in st_lsm6dsx_sensor_settings
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH v3 0/5] iio: imu: st_lsm6dsx: Add support for LSM9DS1
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH v3 4/5] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH v3 5/5] dt-bindings: iio: imu: st_lsm6dsx: add lsm9ds1 device bindings
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH v3 3/5] iio: imu: st_lsm6sdx: move register definitions to sensor_settings struct
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH v3 1/5] iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH v2 02/10] iio: document bindings for mounting matrices
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] ARM: dts: am33xx: Add nodes for eQEP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>