Il giorno gio 17 ott 2019 alle ore 14:34 Jonathan Cameron
<jonathan.cameron@xxxxxxxxxx> ha scritto:
>
> On Wed, 16 Oct 2019 15:33:42 +0200
> Andrea Merello <andrea.merello@xxxxxxxxx> wrote:
>
> > Il giorno dom 6 ott 2019 alle ore 09:55 Jonathan Cameron
> > <jic23@xxxxxxxxxx> ha scritto:
> > >
> > > On Mon, 23 Sep 2019 14:17:13 +0200
> > > Andrea Merello <andrea.merello@xxxxxxxxx> wrote:
> > >
> > > > This sensor can perform samples averaging in hardware, but currently the
> > > > driver leaves this setting alone (default is no averaging).
> > > >
> > > > This patch introduces a new IIO attribute that allows the user to set the
> > > > averaging as desired (the HW supports averaging of 2, 5, 8 or 16 samples)
> > > >
> > > > Signed-off-by: Andrea Merello <andrea.merello@xxxxxxxxx>
> > >
> > > Sounds like oversampling combined with a lower sampling frequency, so
> > > there is standard ABI for that.
> >
> > OK. Do you refer to "oversampling_ratio"?
> >
> > The datasheet says this applies to thermocouple measure, but by doing
> > some testing with real HW, it seems that this setting affects both
> > thermocouple and cold-junction measures, so I guess it shouldn't be in
> > the form "in_temp_raw_oversampling_ratio"; does this sound right to
> > you?
> Ah yes. oversampling_ratio it is. I should read our Docs :)
OK. I will do a V2 with this.
> I think
> in_temp_oversampling_ratio will be generated if you use the info_mask_shared_by_type
> to do this.
>
> _raw is just another type of information about the channel, rather than
> part of the channel naming.
>
> Thanks,
>
> Jonathan
>
> >
> > > Jonathan
> > >
> > > > ---
> > > > drivers/iio/temperature/max31856.c | 43 ++++++++++++++++++++++++++++++
> > > > 1 file changed, 43 insertions(+)
> > > >
> > > > diff --git a/drivers/iio/temperature/max31856.c b/drivers/iio/temperature/max31856.c
> > > > index d12613f7ba3c..8b2e0102fa5c 100644
> > > > --- a/drivers/iio/temperature/max31856.c
> > > > +++ b/drivers/iio/temperature/max31856.c
> > > > @@ -24,6 +24,8 @@
> > > > #define MAX31856_CR0_OCFAULT BIT(4)
> > > > #define MAX31856_CR0_OCFAULT_MASK GENMASK(5, 4)
> > > > #define MAX31856_CR0_FILTER_50HZ BIT(0)
> > > > +#define MAX31856_AVERAGING_MASK GENMASK(6, 4)
> > > > +#define MAX31856_AVERAGING_SHIFT 4
> > > > #define MAX31856_TC_TYPE_MASK GENMASK(3, 0)
> > > > #define MAX31856_FAULT_OVUV BIT(1)
> > > > #define MAX31856_FAULT_OPEN BIT(0)
> > > > @@ -65,6 +67,7 @@ struct max31856_data {
> > > > struct spi_device *spi;
> > > > u32 thermocouple_type;
> > > > bool filter_50hz;
> > > > + int averaging;
> > > > };
> > > >
> > > > static int max31856_read(struct max31856_data *data, u8 reg,
> > > > @@ -109,6 +112,10 @@ static int max31856_init(struct max31856_data *data)
> > > >
> > > > reg_cr1_val &= ~MAX31856_TC_TYPE_MASK;
> > > > reg_cr1_val |= data->thermocouple_type;
> > > > +
> > > > + reg_cr1_val &= ~MAX31856_AVERAGING_MASK;
> > > > + reg_cr1_val |= data->averaging << MAX31856_AVERAGING_SHIFT;
> > > > +
> > > > ret = max31856_write(data, MAX31856_CR1_REG, reg_cr1_val);
> > > > if (ret)
> > > > return ret;
> > > > @@ -295,14 +302,50 @@ static ssize_t set_filter(struct device *dev,
> > > > return len;
> > > > }
> > > >
> > > > +static ssize_t show_averaging(struct device *dev,
> > > > + struct device_attribute *attr,
> > > > + char *buf)
> > > > +{
> > > > + struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> > > > + struct max31856_data *data = iio_priv(indio_dev);
> > > > +
> > > > + return sprintf(buf, "%d\n", 1 << data->averaging);
> > > > +}
> > > > +
> > > > +static ssize_t set_averaging(struct device *dev,
> > > > + struct device_attribute *attr,
> > > > + const char *buf,
> > > > + size_t len)
> > > > +{
> > > > + struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> > > > + struct max31856_data *data = iio_priv(indio_dev);
> > > > + unsigned int nsamples;
> > > > + int shift;
> > > > + int ret;
> > > > +
> > > > + ret = kstrtouint(buf, 10, &nsamples);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + shift = fls(nsamples) - 1;
> > > > + if (nsamples > 16 || BIT(shift) != nsamples)
> > > > + return -EINVAL;
> > > > +
> > > > + data->averaging = shift;
> > > > + max31856_init(data);
> > > > + return len;
> > > > +}
> > > > +
> > > > static IIO_DEVICE_ATTR(fault_ovuv, 0444, show_fault_ovuv, NULL, 0);
> > > > static IIO_DEVICE_ATTR(fault_oc, 0444, show_fault_oc, NULL, 0);
> > > > static IIO_DEVICE_ATTR(filter, 0644, show_filter, set_filter, 0);
> > > > +static IIO_DEVICE_ATTR(averaging, 0644, show_averaging, set_averaging, 0);
> > > >
> > > > static struct attribute *max31856_attributes[] = {
> > > > &iio_dev_attr_fault_ovuv.dev_attr.attr,
> > > > &iio_dev_attr_fault_oc.dev_attr.attr,
> > > > &iio_dev_attr_filter.dev_attr.attr,
> > > > + &iio_dev_attr_averaging.dev_attr.attr,
> > > > NULL,
> > > > };
> > > >
> > >
>
>
