[PATCH v3] dt-bindings: iio: adc: Migrate MCP3911 documentation to yaml

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Rewrite bindings to use json-schema vocabulary.

Signed-off-by: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
---
 .../devicetree/bindings/iio/adc/mcp3911.txt   | 30 --------
 .../bindings/iio/adc/microchip,mcp3911.yaml   | 71 +++++++++++++++++++
 MAINTAINERS                                   |  2 +-
 3 files changed, 72 insertions(+), 31 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/iio/adc/mcp3911.txt
 create mode 100644 Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml

diff --git a/Documentation/devicetree/bindings/iio/adc/mcp3911.txt b/Documentation/devicetree/bindings/iio/adc/mcp3911.txt
deleted file mode 100644
index 3071f48fb30b..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/mcp3911.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-* Microchip MCP3911 Dual channel analog front end (ADC)
-
-Required properties:
- - compatible: Should be "microchip,mcp3911"
- - reg: SPI chip select number for the device
-
-Recommended properties:
- - spi-max-frequency: Definition as per
-	 Documentation/devicetree/bindings/spi/spi-bus.txt.
-	 Max frequency for this chip is 20MHz.
-
-Optional properties:
- - clocks: Phandle and clock identifier for sampling clock
- - interrupt-parent: Phandle to the parent interrupt controller
- - interrupts: IRQ line for the ADC
- - microchip,device-addr: Device address when multiple MCP3911 chips are present on the
-	same SPI bus. Valid values are 0-3. Defaults to 0.
- - vref-supply: Phandle to the external reference voltage supply.
-
-Example:
-adc@0 {
-	compatible = "microchip,mcp3911";
-	reg = <0>;
-	interrupt-parent = <&gpio5>;
-	interrupts = <15 IRQ_TYPE_EDGE_RISING>;
-	spi-max-frequency = <20000000>;
-	microchip,device-addr = <0>;
-	vref-supply = <&vref_reg>;
-	clocks = <&xtal>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
new file mode 100644
index 000000000000..881059b80d61
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+# Copyright 2019 Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/bindings/iio/adc/microchip,mcp3911.yaml#";
+$schema: "http://devicetree.org/meta-schemas/core.yaml#";
+
+title: Microchip MCP3911 Dual channel analog front end (ADC)
+
+maintainers:
+  - Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
+  - Kent Gustavsson <nedo80@xxxxxxxxx>
+
+description: |
+  Bindings for the Microchip MCP3911 Dual channel ADC device. Datasheet can be
+  found here: https://ww1.microchip.com/downloads/en/DeviceDoc/20002286C.pdf
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp3911
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  clocks:
+    description: |
+      Phandle and clock identifier for external sampling clock.
+      If not specified, the internal crystal oscillator will be used.
+    maxItems: 1
+
+  interrupts:
+    description: IRQ line of the ADC
+    maxItems: 1
+
+  microchip,device-addr:
+    description: Device address when multiple MCP3911 chips are present on the same SPI bus.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [0, 1, 2, 3]
+      - default: 0
+
+  vref-supply:
+    description: |
+      Phandle to the external reference voltage supply.
+      If not specified, the internal voltage reference (1.2V) will be used.
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "microchip,mcp3911";
+        reg = <0>;
+        interrupt-parent = <&gpio5>;
+        interrupts = <15 2>;
+        spi-max-frequency = <20000000>;
+        microchip,device-addr = <0>;
+        vref-supply = <&vref_reg>;
+        clocks = <&xtal>;
+      };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index e51a68bf8ca8..fbccc9d450ff 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10723,7 +10723,7 @@ M:	Kent Gustavsson <kent@xxxxxxxxxx>
 L:	linux-iio@xxxxxxxxxxxxxxx
 S:	Supported
 F:	drivers/iio/adc/mcp3911.c
-F:	Documentation/devicetree/bindings/iio/adc/mcp3911.txt
+F:	Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
 
 MICROCHIP NAND DRIVER
 M:	Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
-- 
2.23.0




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux