Linux IIO Development

• Thread Index

• Re: [PATCH 1/4] iio: adc: Add PM7325 PMIC7 ADC bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] iio: Add device tree support for silabs,si7005
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/1] drivers: imu: adis16475.c: Remove scan index from delta channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: imu: st,lsm6dsx: add mount-matrix property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] iio: resolver: ad2s1210: small cleanups
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: qcm6490-fairphone-fp5: Add PM7325 thermals
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/4] arm64: dts: qcom: qcm6490-fairphone-fp5: Add PM7250B thermals
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 6/6] counter: stm32-timer-cnt: add support for events
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v2 0/6] counter: fix, improvements and stm32 timer events support
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v2 5/6] counter: stm32-timer-cnt: populate capture channels and check encoder
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v2 4/6] counter: stm32-timer-cnt: introduce clock signal
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Xilinx XADC fixes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC 1/2] dt-bindings: iio: imu: Add DT binding doc for BMI323
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: imu: st,lsm6dsx: add mount-matrix property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] iio: resolver: ad2s1210: add support for adi,fixed-mode
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2] iio: adc: MCP3564: fix warn: unsigned '__x' is never less than zero.
  • From: <marius.cristea@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: adc: Add PM7325 PMIC7 ADC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: adc: Add PM7325 PMIC7 ADC bindings
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] iio: adc: Add PM7325 PMIC7 ADC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC 1/2] dt-bindings: iio: imu: Add DT binding doc for BMI323
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH 2/4] arm64: dts: qcom: qcm6490-fairphone-fp5: Add PM7250B thermals
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 0/4] Add Fairphone 5 thermals (PMK7325, PM7250B, PM7325)
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 3/4] arm64: dts: qcom: qcm6490-fairphone-fp5: Add PMK7325 thermals
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 4/4] arm64: dts: qcom: qcm6490-fairphone-fp5: Add PM7325 thermals
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 1/4] iio: adc: Add PM7325 PMIC7 ADC bindings
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH] iio: resolver: ad2s1210: add support for adi,fixed-mode
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: trivial-devices: add silabs,si7005
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: imu: Add Bosch BMI323
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v2 0/2] iio: imu: Add driver and dt-bindings for BMI323
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: imu: Add Bosch BMI323
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH] iio: resolver: ad2s1210: add support for adi,fixed-mode
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: trivial-devices: add silabs,si7005
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 1/2] iio: si7005: Add device tree support
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 0/2] iio: Add device tree support for silabs,si7005
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Ivan Mikhaylov <fr0st61te@xxxxxxxxx>
• Re: [PATCH v5 4/4] iio: resolver: ad2s1210: move out of staging
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 1/2] iio: resolver: ad2s1210: remove DRV_NAME macro
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 0/2] iio: resolver: ad2s1210: small cleanups
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 2/2] iio: resolver: ad2s1210: remove of_match_ptr()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 1/1] drivers: imu: adis16475.c: Remove scan index from delta channels
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 10/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/1] drivers: imu: adis16475.c: Remove scan index from delta channels
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v2] dt-bindings: iio: imu: st,lsm6dsx: add mount-matrix property
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCH 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• [PATCH 1/1] drivers: imu: adis16475.c: Remove scan index from delta channels
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• [PATCH 0/1] adis16475.c: Remove scan index from delta channels
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• RE: [PATCH v2 0/2] Xilinx XADC fixes
  • From: "O'Griofa, Conall" <conall.ogriofa@xxxxxxx>
• Re: [PATCH v5 4/4] iio: resolver: ad2s1210: move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1] iio: adc: MCP3564: fix warn: unsigned '__x' is never less than zero.
  • From: <Marius.Cristea@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/4] staging: iio: resolver: ad2s1210: simplify code with guard(mutex)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/4] staging: iio: resolver: ad2s1210: clear faults after soft reset
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/4] staging: iio: resolver: ad2s1210: refactor sample toggle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1] iio: adc: MCP3564: fix warn: unsigned '__x' is never less than zero.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1] iio: adc: MCP3564: fix warn: unsigned '__x' is never less than zero.
  • From: <Marius.Cristea@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: Avago APDS9306
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: Avago APDS9306
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH v6 10/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH] iio: bu27008: Add processed illuminance channel
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v5 4/4] iio: resolver: ad2s1210: move out of staging
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v5 3/4] staging: iio: resolver: ad2s1210: simplify code with guard(mutex)
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v5 2/4] staging: iio: resolver: ad2s1210: clear faults after soft reset
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v5 1/4] staging: iio: resolver: ad2s1210: refactor sample toggle
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v5 0/4] iio: resolver: move ad2s1210 out of staging
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Ivan Mikhaylov <fr0st61te@xxxxxxxxx>
• Re: [RFC 1/2] dt-bindings: iio: imu: Add DT binding doc for BMI323
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 17/17] staging: iio: resolver: ad2s1210: simplify code with guard(mutex)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 17/17] staging: iio: resolver: ad2s1210: simplify code with guard(mutex)
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: add missing reset-gpios constrain
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Xilinx XADC fixes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: Avago APDS9306
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 14/17] staging: iio: resolver: ad2s1210: add register/fault support summary
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 17/17] staging: iio: resolver: ad2s1210: simplify code with guard(mutex)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 16/17] staging: iio: resolver: ad2s1210: remove fault attribute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 15/17] staging: iio: resolver: ad2s1210: add label attribute support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 13/17] staging: iio: resolver: ad2s1210: implement fault events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 12/17] iio: event: add optional event label support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 11/17] staging: iio: resolver: ad2s1210: rename DOS reset min/max attrs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 10/17] staging: iio: resolver: ad2s1210: convert DOS mismatch threshold to event attr
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 09/17] staging: iio: resolver: ad2s1210: convert DOS overrange threshold to event attr
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 07/17] staging: iio: resolver: ad2s1210: convert LOT threshold attrs to event attrs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 08/17] staging: iio: resolver: ad2s1210: convert LOS threshold to event attr
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 06/17] staging: iio: resolver: ad2s1210: add triggered buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 05/17] staging: iio: resolver: ad2s1210: add phase lock range support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 04/17] staging: iio: resolver: ad2s1210: convert resolution to devicetree property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 03/17] staging: iio: resolver: ad2s1210: convert fexcit to channel attribute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 02/17] staging: iio: resolver: ad2s1210: implement hysteresis as channel attr
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 01/17] staging: iio: resolver: ad2s1210: do not use fault register for dummy read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: mt6577_auxadc: Fix kernel panic on suspend
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 0/3] iio: adc: ad7192: Add improvements and feature
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: adc: Add driver support for MAX34408/9
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: Avago APDS9306
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: sanity check available_scan_masks array
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC 1/2] dt-bindings: iio: imu: Add DT binding doc for BMI323
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: Avago APDS9306
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: exynos-adc: request second interupt only when touchscreen mode is used
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v6 11/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v6 08/11] arm64: dts: st: add RIFSC as an access controller for STM32MP25x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v6 10/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v6 09/11] bus: etzpc: introduce ETZPC firewall controller driver
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v6 04/11] dt-bindings: bus: document ETZPC
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v6 07/11] bus: rifsc: introduce RIFSC firewall controller driver
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v6 06/11] of: property: fw_devlink: Add support for "access-controller"
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v6 05/11] firewall: introduce stm32_firewall framework
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v6 02/11] dt-bindings: treewide: add access-controllers description
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v6 03/11] dt-bindings: bus: document RIFSC
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v6 00/11] Introduce STM32 Firewall framework
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v6 01/11] dt-bindings: document generic access controllers
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH] iio: sanity check available_scan_masks array
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v4 2/3] iio: adc: ad7192: Remove unused member
  • From: alisadariana@xxxxxxxxx
• [PATCH v4 3/3] iio: adc: ad7192: Add fast settling support
  • From: alisadariana@xxxxxxxxx
• [PATCH v4 1/3] iio: adc: ad7192: Organize chip info
  • From: alisadariana@xxxxxxxxx
• [PATCH v4 0/3] iio: adc: ad7192: Add improvements and feature
  • From: alisadariana@xxxxxxxxx
• Re: [PATCH] iio: adc: mt6577_auxadc: Fix kernel panic on suspend
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: [PATCH] iio: adc: mt6577_auxadc: Fix kernel panic on suspend
  • From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
• [PATCH] iio: adc: mt6577_auxadc: Fix kernel panic on suspend
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: Avago APDS9306
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: sanity check available_scan_masks array
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: bu27008: Add processed illuminance channel
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v1] iio: adc: MCP3564: fix warn: unsigned '__x' is never less than zero.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: bu27008: Add processed illuminance channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 02/27] staging: iio: resolver: ad2s1210: fix use before initialization
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC 1/2] dt-bindings: iio: imu: Add DT binding doc for BMI323
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC 1/2] dt-bindings: iio: imu: Add DT binding doc for BMI323
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: Avago APDS9306
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 4/5] iio: magnetometer: ak8975: Drop deprecated enums from OF table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/7] drivers/counter: add local variable for newly allocated attribute_group**
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4/7] drivers/counter: add local variable for newly allocated attribute_group**
  • From: Max Kellermann <max.kellermann@xxxxxxxxx>
• Re: [PATCH v3 0/5] Add RZ/G2UL MTU3a support
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 0/5] Add RZ/G2UL MTU3a support
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v3 0/5] Add RZ/G2UL MTU3a support
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v3 0/5] Add RZ/G2UL MTU3a support
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: Avago APDS9306
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• [PATCH] iio: exynos-adc: request second interupt only when touchscreen mode is used
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: adc: Add driver support for MAX34408/9
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 0/5] Add RZ/G2UL MTU3a support
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: Avago APDS9306
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Michael Walle <michael@xxxxxxxx>
• RE: [PATCH v3 0/5] Add RZ/G2UL MTU3a support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: light: Avago APDS9306
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• [PATCH 0/2] Support for Avago APDS9306 Ambient Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [RFC 1/2] dt-bindings: iio: imu: Add DT binding doc for BMI323
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v5 2/2] iio: adc: Add driver support for MAX34408/9
  • From: Ivan Mikhaylov <fr0st61te@xxxxxxxxx>
• [PATCH v5 0/2] Add maxim max34408/34409 ADC driver and yaml
  • From: Ivan Mikhaylov <fr0st61te@xxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Ivan Mikhaylov <fr0st61te@xxxxxxxxx>
• Re: [PATCH v3 3/3] ARM: dts: omap: omap4-embt2ws: Add IMU at control unit
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] iio: Use device_get_match_data()
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: trivial-devices: Fix MEMSIC MXC4005 compatible string
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PULL] 1st set of IIO fixes for 6.6
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/5] iio: magnetometer: ak8975: Drop deprecated enums from OF table
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 02/27] staging: iio: resolver: ad2s1210: fix use before initialization
  • From: Vincent Whitchurch <Vincent.Whitchurch@xxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Ceclan Dumitru-Ioan <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH] iio: sanity check available_scan_masks array
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] iio: sanity check available_scan_masks array
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH] iio: bu27008: Add processed illuminance channel
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v4 14/17] staging: iio: resolver: ad2s1210: add register/fault support summary
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v4 17/17] staging: iio: resolver: ad2s1210: simplify code with guard(mutex)
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v4 16/17] staging: iio: resolver: ad2s1210: remove fault attribute
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v4 15/17] staging: iio: resolver: ad2s1210: add label attribute support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v4 13/17] staging: iio: resolver: ad2s1210: implement fault events
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v4 12/17] iio: event: add optional event label support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v4 11/17] staging: iio: resolver: ad2s1210: rename DOS reset min/max attrs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v4 03/17] staging: iio: resolver: ad2s1210: convert fexcit to channel attribute
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v4 09/17] staging: iio: resolver: ad2s1210: convert DOS overrange threshold to event attr
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v4 06/17] staging: iio: resolver: ad2s1210: add triggered buffer support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v4 05/17] staging: iio: resolver: ad2s1210: add phase lock range support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v4 10/17] staging: iio: resolver: ad2s1210: convert DOS mismatch threshold to event attr
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v4 04/17] staging: iio: resolver: ad2s1210: convert resolution to devicetree property
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v4 02/17] staging: iio: resolver: ad2s1210: implement hysteresis as channel attr
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v4 08/17] staging: iio: resolver: ad2s1210: convert LOS threshold to event attr
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v4 07/17] staging: iio: resolver: ad2s1210: convert LOT threshold attrs to event attrs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v4 01/17] staging: iio: resolver: ad2s1210: do not use fault register for dummy read
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v4 00/17] iio: resolver: move ad2s1210 out of staging
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: adc: add AD7173
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 22/27] staging: iio: resolver: ad2s1210: convert LOS threshold to event attr
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Ivan Mikhaylov <fr0st61te@xxxxxxxxx>
• [PATCH v4 2/2] iio: adc: Add driver support for MAX34408/9
  • From: Ivan Mikhaylov <fr0st61te@xxxxxxxxx>
• [PATCH v4 0/2] Add maxim max34408/34409 ADC driver and yaml
  • From: Ivan Mikhaylov <fr0st61te@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add driver support for MAX34408/9
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] 1st set of IIO fixes for 6.6
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 2/2] iio: adc: Add driver support for MAX34408/9
  • From: Ivan Mikhaylov <fr0st61te@xxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: adc: add AD7173
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: ads7038: Add driver support for 12bit ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] mxc4005/mxc6655 OF improvements
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: ti,ads7038: Add description for ADS7038
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 0/2] Add maxim max34408/34409 ADC driver and yaml
  • From: Ivan Mikhaylov <fr0st61te@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Ivan Mikhaylov <fr0st61te@xxxxxxxxx>
• Re: [PATCH 2/2] iio: accel: mxc4005: allow module autoloading via OF compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: meson: improve error logging at probe stage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6] tools: iio: iio_generic_buffer ensure alignment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: sanity check available_scan_masks array
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: ti_am335x_adc: Fix return value check of tiadc_request_dma()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 22/27] staging: iio: resolver: ad2s1210: convert LOS threshold to event attr
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: bu27008: Add processed illuminance channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 01/27] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: ak8975: Fix 'Unexpected device' error
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 26/27] staging: iio: resolver: ad2s1210: implement fault events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: resolver: ad2s1210: fix return with lock held
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 22/27] staging: iio: resolver: ad2s1210: convert LOS threshold to event attr
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-adc: replace deprecated strncpy
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 13/27] staging: iio: resolver: ad2s1210: rework gpios
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: add missing reset-gpios constrain
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH] dt-bindings: iio: add missing reset-gpios constrain
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: adc: ti,ads7038: Add description for ADS7038
  • From: werneazc@xxxxxxxxx
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: ti,ads7038: Add description for ADS7038
  • From: werneazc <werneazc@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: adc: add AD7173
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: ti,ads7038: Add description for ADS7038
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: trivial-devices: Fix MEMSIC MXC4005 compatible string
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: ti,ads7038: Add description for ADS7038
  • From: werneazc <werneazc@xxxxxxxxx>
• [PATCH v2 2/2] iio: adc: ads7038: Add driver support for 12bit ADC
  • From: werneazc@xxxxxxxxx
• [PATCH v3 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ads7038: Add driver support for 12bit ADC
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: ad7173: add AD7173 driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• RE: [PATCH] iio: buffer: Fix demux update
  • From: Yeah Yeah <yeah32857@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ads7038: Add driver support for 12bit ADC
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1] iio: adc: aspeed: Support deglitch feature.
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• Re: [PATCH v1] iio: adc: aspeed: Support deglitch feature.
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• [PATCH 2/2] iio: accel: mxc4005: allow module autoloading via OF compatible
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: trivial-devices: Fix MEMSIC MXC4005 compatible string
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• [PATCH 0/2] mxc4005/mxc6655 OF improvements
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: ti,ads7038: Add description for ADS7038
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] staging: iio: resolver: ad2s1210: fix return with lock held
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Error "swiotlb buffer is full" when reading 8 channels using AD7923 driver
  • From: Hein Gustavsen <hein@xxxxxxxxxxxxx>
• RE: [PATCH v3 22/27] staging: iio: resolver: ad2s1210: convert LOS threshold to event attr
  • From: "Hennerich, Michael" <Michael.Hennerich@xxxxxxxxxx>
• RE: [PATCH v3 01/27] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: "Hennerich, Michael" <Michael.Hennerich@xxxxxxxxxx>
• [PATCH 2/2] iio: adc: ads7038: Add driver support for 12bit ADC
  • From: werneazc@xxxxxxxxx
• [PATCH 1/2] dt-bindings: iio: adc: ti,ads7038: Add description for ADS7038
  • From: werneazc@xxxxxxxxx
• Re: [PATCH v2 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Michael Walle <michael@xxxxxxxx>
• Re: [PATCH v2 1/6] tools/counter: add a flexible watch events tool
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH 3/8] tools/counter: add a flexible watch events tool
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v3 25/27] staging: iio: resolver: ad2s1210: rename DOS reset min/max attrs
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH v3 24/27] staging: iio: resolver: ad2s1210: convert DOS mismatch threshold to event attr
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 23/27] staging: iio: resolver: ad2s1210: convert DOS overrange threshold to event attr
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] iio: magnetometer: ak8975: Fix 'Unexpected device' error
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 22/27] staging: iio: resolver: ad2s1210: convert LOS threshold to event attr
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: meson: improve error logging at probe stage
  • From: George Stark <gnstark@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: ad7173: add AD7173 driver
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH v3 21/27] staging: iio: resolver: ad2s1210: convert LOT threshold attrs to event attrs
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Ceclan Dumitru-Ioan <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH v3 26/27] staging: iio: resolver: ad2s1210: implement fault events
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Ceclan Dumitru-Ioan <mitrutzceclan@xxxxxxxxx>
• [PATCH v6] tools: iio: iio_generic_buffer ensure alignment
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH] iio: sanity check available_scan_masks array
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v5] tools: iio: iio_generic_buffer ensure alignment
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v3 19/27] staging: iio: resolver: ad2s1210: add phase lock range support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 03/11] dt-bindings: bus: document RIFSC
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH v5 01/11] dt-bindings: document generic access controller
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH v1] iio: adc: aspeed: Support deglitch feature.
  • From: "Andrew Jeffery" <andrew@xxxxxxxx>
• RE: [PATCH] iio: buffer: Fix demux update
  • From: Yeah Yeah <yeah32857@xxxxxxxxxx>
• Re: [PATCH v3 26/27] staging: iio: resolver: ad2s1210: implement fault events
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 25/27] staging: iio: resolver: ad2s1210: rename DOS reset min/max attrs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 26/27] staging: iio: resolver: ad2s1210: implement fault events
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 26/27] staging: iio: resolver: ad2s1210: implement fault events
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v1] iio: adc: MCP3564: fix warn: unsigned '__x' is never less than zero.
  • From: <marius.cristea@xxxxxxxxxxxxx>
• Re: [PATCH v3 22/27] staging: iio: resolver: ad2s1210: convert LOS threshold to event attr
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 01/27] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v5] tools: iio: iio_generic_buffer ensure alignment
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH] iio: bu27008: Add processed illuminance channel
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [GIT PULL] First set of Counter fixes for 6.6
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] iio: magnetometer: ak8975: Fix 'Unexpected device' error
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH] iio: magnetometer: ak8975: Fix 'Unexpected device' error
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: ak8975: Fix 'Unexpected device' error
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] iio: adc: aspeed: Support deglitch feature.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• RE: [PATCH] iio: magnetometer: ak8975: Fix 'Unexpected device' error
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: ak8975: Fix 'Unexpected device' error
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: ak8975: Fix 'Unexpected device' error
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 02/27] staging: iio: resolver: ad2s1210: fix use before initialization
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v5 01/11] dt-bindings: document generic access controller
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH v3 01/27] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v1] iio: adc: aspeed: Support deglitch feature.
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• Re: [PATCH v3 02/27] staging: iio: resolver: ad2s1210: fix use before initialization
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v3 01/27] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v4 1/5] tools: iio: iio_generic_buffer ensure alignment
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• RE: [PATCH] iio: magnetometer: ak8975: Fix 'Unexpected device' error
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v1] iio: adc: aspeed: Support deglitch feature.
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: ak8975: Fix 'Unexpected device' error
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio: magnetometer: ak8975: Fix 'Unexpected device' error
  • From: André Apitzsch <git@xxxxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Denis Benato <benato.denis96@xxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 14/27] staging: iio: resolver: ad2s1210: implement hysteresis as channel attr
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Ivan Mikhaylov <fr0st61te@xxxxxxxxx>
• Re: [PATCH v3 3/3] iio: adc: ad7192: Add fast settling support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 16/27] staging: iio: resolver: ad2s1210: read excitation frequency from control register
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 07/27] staging: iio: resolver: ad2s1210: always use 16-bit value for raw read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: adc: add AD7173
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 06/27] staging: iio: resolver: ad2s1210: sort imports
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 23/27] staging: iio: resolver: ad2s1210: convert DOS overrange threshold to event attr
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 19/27] staging: iio: resolver: ad2s1210: add phase lock range support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: imu: mpu6050: add level shifter flag
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 22/27] staging: iio: resolver: ad2s1210: convert LOS threshold to event attr
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1] iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 03/27] staging: iio: resolver: ad2s1210: remove call to spi_setup()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 22/27] staging: iio: resolver: ad2s1210: convert LOS threshold to event attr
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 21/27] staging: iio: resolver: ad2s1210: convert LOT threshold attrs to event attrs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 01/27] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 08/27] staging: iio: resolver: ad2s1210: implement IIO_CHAN_INFO_SCALE
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/5] tools: iio: iio_generic_buffer ensure alignment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 14/27] staging: iio: resolver: ad2s1210: implement hysteresis as channel attr
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 09/27] staging: iio: resolver: ad2s1210: use devicetree to get CLKIN rate
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: adc: ad7192: Use bitfield access macros
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 13/27] staging: iio: resolver: ad2s1210: rework gpios
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 26/27] staging: iio: resolver: ad2s1210: implement fault events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC 1/2] dt-bindings: iio: imu: Add DT binding doc for BMI323
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 14/27] staging: iio: resolver: ad2s1210: implement hysteresis as channel attr
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: ad7192: Improve f_order computation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 12/27] staging: iio: resolver: ad2s1210: remove config attribute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 15/27] staging: iio: resolver: ad2s1210: refactor setting excitation frequency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 05/27] staging: iio: resolver: ad2s1210: remove spi_set_drvdata()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 00/27] iio: resolver: move ad2s1210 out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/1] iio: imu: adis16475.c: Add buffer padding after temp channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 18/27] staging: iio: resolver: ad2s1210: convert resolution to devicetree property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 22/27] staging: iio: resolver: ad2s1210: convert LOS threshold to event attr
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-adc: replace deprecated strncpy
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 5/5] MAINTAINERS: Add ROHM BM1390
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/6] tools: iio: iio_generic_buffer ensure alignment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 04/27] staging: iio: resolver: ad2s1210: check return of ad2s1210_initial()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: fix Analog Devices website link
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-adc: replace deprecated strncpy
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH v3 17/27] staging: iio: resolver: ad2s1210: convert fexcit to channel attribute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 10/27] staging: iio: resolver: ad2s1210: use regmap for config registers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 11/27] staging: iio: resolver: ad2s1210: add debugfs reg access
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/5] iio: improve doc for available_scan_mask
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Support ROHM KX132ACR-LBZ Accelerometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1] iio: adc: aspeed: Support deglitch feature.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 02/27] staging: iio: resolver: ad2s1210: fix use before initialization
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 25/27] staging: iio: resolver: ad2s1210: rename DOS reset min/max attrs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add driver support for MAX34408/9
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 26/27] staging: iio: resolver: ad2s1210: implement fault events
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add driver support for MAX34408/9
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 00/27] iio: resolver: move ad2s1210 out of staging
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 2/2] iio: adc: Add driver support for MAX34408/9
  • From: Ivan Mikhaylov <fr0st61te@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Ivan Mikhaylov <fr0st61te@xxxxxxxxx>
• [PATCH v2 0/2] Add maxim max34408/34409 ADC driver and yaml
  • From: Ivan Mikhaylov <fr0st61te@xxxxxxxxx>
• Re: [PATCH v3 14/27] staging: iio: resolver: ad2s1210: implement hysteresis as channel attr
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 00/27] iio: resolver: move ad2s1210 out of staging
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 24/27] staging: iio: resolver: ad2s1210: convert DOS mismatch threshold to event attr
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 26/27] staging: iio: resolver: ad2s1210: implement fault events
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 25/27] staging: iio: resolver: ad2s1210: rename DOS reset min/max attrs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 27/27] staging: iio: resolver: ad2s1210: add label attribute support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 23/27] staging: iio: resolver: ad2s1210: convert DOS overrange threshold to event attr
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 22/27] staging: iio: resolver: ad2s1210: convert LOS threshold to event attr
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 20/27] staging: iio: resolver: ad2s1210: add triggered buffer support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 08/27] staging: iio: resolver: ad2s1210: implement IIO_CHAN_INFO_SCALE
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 19/27] staging: iio: resolver: ad2s1210: add phase lock range support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 13/27] staging: iio: resolver: ad2s1210: rework gpios
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 11/27] staging: iio: resolver: ad2s1210: add debugfs reg access
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 09/27] staging: iio: resolver: ad2s1210: use devicetree to get CLKIN rate
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 12/27] staging: iio: resolver: ad2s1210: remove config attribute
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 21/27] staging: iio: resolver: ad2s1210: convert LOT threshold attrs to event attrs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 18/27] staging: iio: resolver: ad2s1210: convert resolution to devicetree property
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 17/27] staging: iio: resolver: ad2s1210: convert fexcit to channel attribute
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 14/27] staging: iio: resolver: ad2s1210: implement hysteresis as channel attr
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 16/27] staging: iio: resolver: ad2s1210: read excitation frequency from control register
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 15/27] staging: iio: resolver: ad2s1210: refactor setting excitation frequency
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 10/27] staging: iio: resolver: ad2s1210: use regmap for config registers
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 07/27] staging: iio: resolver: ad2s1210: always use 16-bit value for raw read
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 06/27] staging: iio: resolver: ad2s1210: sort imports
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 05/27] staging: iio: resolver: ad2s1210: remove spi_set_drvdata()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 04/27] staging: iio: resolver: ad2s1210: check return of ad2s1210_initial()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 03/27] staging: iio: resolver: ad2s1210: remove call to spi_setup()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 01/27] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 02/27] staging: iio: resolver: ad2s1210: fix use before initialization
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 00/27] iio: resolver: move ad2s1210 out of staging
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v5 02/11] dt-bindings: treewide: add access-controller description
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v5 10/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v5 08/11] arm64: dts: st: add RIFSC as an access controller for STM32MP25x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v5 11/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v5 09/11] bus: etzpc: introduce ETZPC firewall controller driver
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v5 05/11] firewall: introduce stm32_firewall framework
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v5 04/11] dt-bindings: bus: document ETZPC
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v5 07/11] bus: rifsc: introduce RIFSC firewall controller driver
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v5 06/11] of: property: fw_devlink: Add support for "access-controller"
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v5 03/11] dt-bindings: bus: document RIFSC
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v5 02/11] dt-bindings: treewide: add access-controller description
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v5 00/11] Introduce STM32 Firewall framework
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v5 01/11] dt-bindings: document generic access controller
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: Add KX132ACR-LBZ accelerometer
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [IGNORE][PATCH v4 01/11] dt-bindings: Document common device controller bindings
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: ad7173: add AD7173 driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [RFC v2 01/11] iio: introduce iio backend device
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH v4 05/11] firewall: introduce stm32_firewall framework
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Ceclan Dumitru-Ioan <mitrutzceclan@xxxxxxxxx>
• [PATCH v2 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: adc: add AD7173
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• [PATCH v2 2/2] iio: kx022a: Support ROHM KX132ACR-LBZ
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: Add KX132ACR-LBZ accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 0/2] Support ROHM KX132ACR-LBZ Accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC v2 01/11] iio: introduce iio backend device
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 0/2] Support ROHM KX132ACR-LBZ Accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v1] iio: adc: aspeed: Support deglitch feature.
  • From: "Andrew Jeffery" <andrew@xxxxxxxx>
• Re: [RFC 1/2] dt-bindings: iio: imu: Add DT binding doc for BMI323
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [RFC 1/2] dt-bindings: iio: imu: Add DT binding doc for BMI323
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Denis Benato <benato.denis96@xxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH v3 2/3] iio: imu: mpu6050: add level shifter flag
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• [PATCH v3 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v3 0/3] ARM: omap: omap4-embt2ws: Add IMU on control unit
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v3 3/3] ARM: dts: omap: omap4-embt2ws: Add IMU at control unit
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v3 2/3] iio: imu: mpu6050: add level shifter flag
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] Support ROHM KX132ACR-LBZ Accelerometer
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• Re: [PATCH v2 2/3] iio: imu: mpu6050: add level shifter flag
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 2/2] iio: kx022a: Support ROHM KX132ACR-LBZ
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: Add KX132ACR-LBZ accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH 0/2] Support ROHM KX132ACR-LBZ Accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/5] tools: iio: iio_generic_buffer ensure alignment
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v4 1/5] tools: iio: iio_generic_buffer ensure alignment
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v4 4/5] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v4 5/5] MAINTAINERS: Add ROHM BM1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v4 2/5] iio: improve doc for available_scan_mask
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v4 3/5] dt-bindings: Add ROHM BM1390 pressure sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v4 1/5] tools: iio: iio_generic_buffer ensure alignment
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v4 0/5] Support ROHM BM1390 pressure sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 3/3] ARM: dts: omap: omap4-embt2ws: Add IMU at control unit
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v2 2/3] iio: imu: mpu6050: add level shifter flag
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v2 3/3] ARM: dts: omap: omap4-embt2ws: Add IMU at control unit
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v2 0/3] ARM: omap: omap4-embt2ws: Add IMU on control unit
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [RFC v2 01/11] iio: introduce iio backend device
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>
• [PATCH] dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/1] iio: imu: adis16475.c: Add buffer padding after temp channel
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 1/6] tools: iio: iio_generic_buffer ensure alignment
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH] MAINTAINERS: fix Analog Devices website link
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH 1/1] iio: imu: adis16475.c: Add buffer padding after temp channel
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• [PATCH 0/1] iio: imu: adis16475.c: Add buffer padding after temp
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v2 01/19] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 19/19] staging: iio: resolver: ad2s1210: add triggered buffer support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Ivan Mikhaylov <fr0st61te@xxxxxxxxx>
• Re: [PATCH v2 09/19] staging: iio: resolver: ad2s1210: use regmap for config registers
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 01/19] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 00/11] Introduce STM32 Firewall framework
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• [PATCH v2] iio: adc: ti_am335x_adc: Fix return value check of tiadc_request_dma()
  • From: Wadim Egorov <w.egorov@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 2/6] iio: improve doc for available_scan_mask
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 1/6] tools: iio: iio_generic_buffer ensure alignment
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: imu: mpu6050: add level shifter flag
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: imu: mpu6050: add level shifter flag
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: imu: mpu6050: add level shifter flag
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH 2/3] iio: imu: mpu6050: add level shifter flag
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v3 5/6] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 3/6] iio: try searching for exact scan_mask
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v3 3/6] iio: try searching for exact scan_mask
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v3 2/6] iio: improve doc for available_scan_mask
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v1] iio: adc: aspeed: Support deglitch feature.
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/6] tools: iio: iio_generic_buffer ensure alignment
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/3] ARM: dts: omap: omap4-embt2ws: Add IMU at control unit
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC v2 01/11] iio: introduce iio backend device
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 0/6] Support ROHM BM1390 pressure sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 2/3] iio: imu: mpu6050: add level shifter flag
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH 0/3] ARM: omap: omap4-embt2ws: Add IMU on control unit
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH 3/3] ARM: dts: omap: omap4-embt2ws: Add IMU at control unit
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v3 0/3] iio: adc: ad7192: Add improvements and feature
  • From: alisadariana@xxxxxxxxx
• [PATCH v3 2/3] iio: adc: ad7192: Improve f_order computation
  • From: alisadariana@xxxxxxxxx
• [PATCH v3 1/3] iio: adc: ad7192: Use bitfield access macros
  • From: alisadariana@xxxxxxxxx
• [PATCH v3 3/3] iio: adc: ad7192: Add fast settling support
  • From: alisadariana@xxxxxxxxx
• Re: [PATCH v2 19/19] staging: iio: resolver: ad2s1210: add triggered buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 18/19] staging: iio: resolver: ad2s1210: add phase_lock_range attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 17/19] staging: iio: resolver: ad2s1210: convert resolution to devicetree property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 14/19] staging: iio: resolver: ad2s1210: refactor setting excitation frequency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 13/19] staging: iio: resolver: ad2s1210: implement hysteresis as channel attr
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 09/19] staging: iio: resolver: ad2s1210: use regmap for config registers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 08/19] staging: iio: resolver: ad2s1210: use devicetree to get fclkin
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 07/19] staging: iio: resolver: ad2s1210: implement IIO_CHAN_INFO_SCALE
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 06/19] staging: iio: resolver: ad2s1210: always use 16-bit value for raw read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 05/19] staging: iio: resolver: ad2s1210: fix probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 04/19] staging: iio: resolver: ad2s1210: fix not restoring sample gpio in channel read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 03/19] staging: iio: resolver: ad2s1210: fix ad2s1210_show_fault
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 02/19] staging: iio: Documentation: document IIO resolver AD2S1210 sysfs attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 01/19] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 00/19] iio: resolver: move ad2s1210 out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: ad7192: Correct reference voltage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Xilinx XADC fixes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/6] iio: pressure: Support ROHM BU1390
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/6] iio: try searching for exact scan_mask
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/6] iio: try searching for exact scan_mask
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/6] iio: improve doc for available_scan_mask
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/6] tools: iio: iio_generic_buffer ensure alignment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/6] Support ROHM BM1390 pressure sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2] iio: adc: ad7192: Correct reference voltage
  • From: alisadariana@xxxxxxxxx
• Re: [PATCH] iio: adc: ad7192: Correct reference voltage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: adc: ad7192: Add fast settling support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: adc: ad7192: Use bitfield access macros
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/9] Support light color temperature and chromaticity
  • From: Basavaraj Natikar <bnatikar@xxxxxxx>
• Re: [RFC 1/2] dt-bindings: iio: imu: Add DT binding doc for BMI323
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC 1/2] dt-bindings: iio: imu: Add DT binding doc for BMI323
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1] iio: adc: MCP3564: fix the static checker warning
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add driver support for MAX34408/9
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/9] Support light color temperature and chromaticity
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 6/9] iio: Add channel type for chromaticity
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: Support ROHM BU1390
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: Support ROHM BU1390
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-adc: replace deprecated strncpy
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH] iio: adc: ad7192: Correct reference voltage
  • From: alisadariana@xxxxxxxxx
• Re: [PATCH 2/2] iio: adc: Add driver support for MAX34408/9
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: sx9324: replace deprecated strncpy
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: ti,ads1015: Document optional interrupt line
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: for kernel comment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 00/49] iio: Convert to platform remove callback returning void
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 01/19] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 6/6] counter: stm32-timer-cnt: add support for events
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 5/6] counter: stm32-timer-cnt: populate capture channels and check encoder
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 4/6] counter: stm32-timer-cnt: introduce clock signal
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 0/6] counter: fix, improvements and stm32 timer events support
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 1/6] tools/counter: add a flexible watch events tool
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 2/6] counter: stm32-timer-cnt: rename quadrature signal
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 3/6] counter: stm32-timer-cnt: rename counter
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: ti,ads1015: Document optional interrupt line
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v3 6/6] MAINTAINERS: Add ROHM BM1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 5/6] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 4/6] dt-bindings: Add ROHM BM1390 pressure sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 3/6] iio: try searching for exact scan_mask
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 2/6] iio: improve doc for available_scan_mask
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 1/6] tools: iio: iio_generic_buffer ensure alignment
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 0/6] Support ROHM BM1390 pressure sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC v2 01/11] iio: introduce iio backend device
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 4/4] iio: resolver: add new driver for AD2S1210
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 03/19] staging: iio: resolver: ad2s1210: fix ad2s1210_show_fault
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: (subset) [PATCH 4/8] mfd: stm32-timers: add support for interrupts
  • From: Lee Jones <lee@xxxxxxxxxx>
• [v2 14/19] staging: iio: resolver: ad2s1210: refactor setting excitation frequency
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 17/19] staging: iio: resolver: ad2s1210: convert resolution to devicetree property
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 08/19] staging: iio: resolver: ad2s1210: use devicetree to get fclkin
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 4/4] iio: resolver: add new driver for AD2S1210
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v2 14/19] staging: iio: resolver: ad2s1210: refactor setting excitation frequency
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 12/19] staging: iio: resolver: ad2s1210: rework gpios
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 09/19] staging: iio: resolver: ad2s1210: use regmap for config registers
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 04/19] staging: iio: resolver: ad2s1210: fix not restoring sample gpio in channel read
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 19/19] staging: iio: resolver: ad2s1210: add triggered buffer support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 13/19] staging: iio: resolver: ad2s1210: implement hysteresis as channel attr
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 16/19] staging: iio: resolver: ad2s1210: rename fexcit attribute
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 10/19] staging: iio: resolver: ad2s1210: add debugfs reg access
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 17/19] staging: iio: resolver: ad2s1210: convert resolution to devicetree property
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 16/19] staging: iio: resolver: ad2s1210: rename fexcit attribute
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 18/19] staging: iio: resolver: ad2s1210: add phase_lock_range attributes
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 3/8] tools/counter: add a flexible watch events tool
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 06/19] staging: iio: resolver: ad2s1210: always use 16-bit value for raw read
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 07/19] staging: iio: resolver: ad2s1210: implement IIO_CHAN_INFO_SCALE
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 05/19] staging: iio: resolver: ad2s1210: fix probe
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 09/19] staging: iio: resolver: ad2s1210: use regmap for config registers
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 2/2] staging: iio: resolver: ad2s1210: add triggered buffer support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [v2 12/19] staging: iio: resolver: ad2s1210: rework gpios
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [v2 00/19] iio: resolver: move ad2s1210 out of staging
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [v2 02/19] staging: iio: Documentation: document IIO resolver AD2S1210 sysfs attributes
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 06/19] staging: iio: resolver: ad2s1210: always use 16-bit value for raw read
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 13/19] staging: iio: resolver: ad2s1210: implement hysteresis as channel attr
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH] iio: sx9324: replace deprecated strncpy
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• [PATCH v2 11/19] staging: iio: resolver: ad2s1210: remove config attribute
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 00/19] iio: resolver: move ad2s1210 out of staging
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH] dt-bindings: iio: adc: ti,ads1015: Document optional interrupt line
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v2 15/19] staging: iio: resolver: ad2s1210: read excitation frequency from control register
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 1/2] staging: iio: resolver: ad2s1210: add phase_lock_range attributes
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 18/19] staging: iio: resolver: ad2s1210: add phase_lock_range attributes
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 04/19] staging: iio: resolver: ad2s1210: fix not restoring sample gpio in channel read
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH] iio: adc: stm32-adc: replace deprecated strncpy
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [v2 18/19] staging: iio: resolver: ad2s1210: add phase_lock_range attributes
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 8/8] counter: stm32-timer-cnt: add support for events
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v2 01/19] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 01/19] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 08/19] staging: iio: resolver: ad2s1210: use devicetree to get fclkin
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 10/19] staging: iio: resolver: ad2s1210: add debugfs reg access
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 11/19] staging: iio: resolver: ad2s1210: remove config attribute
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 07/19] staging: iio: resolver: ad2s1210: implement IIO_CHAN_INFO_SCALE
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 02/19] staging: iio: Documentation: document IIO resolver AD2S1210 sysfs attributes
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 15/19] staging: iio: resolver: ad2s1210: read excitation frequency from control register
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 03/19] staging: iio: resolver: ad2s1210: fix ad2s1210_show_fault
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 19/19] staging: iio: resolver: ad2s1210: add triggered buffer support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 4/4] iio: resolver: add new driver for AD2S1210
  • From: Rob Herring <robh@xxxxxxxxxx>
• [v2 05/19] staging: iio: resolver: ad2s1210: fix probe
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH] iio: adc: for kernel comment
  • From: Andy Shen Shen <shengaoya@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: resolver: add new driver for AD2S1210
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 7/9] iio: hid-sensor-als: Add light chromaticity support
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH 2/4] iio: sysfs: add IIO_DEVICE_ATTR_NAMED_RW macro
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 4/4] iio: resolver: add new driver for AD2S1210
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 3/4] staging: iio: resolver: remove ad2s1210 driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 0/4] iio: resolver: move ad2s1210 out of staging
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 3/9] iio: hid-sensor-als: Add light color temperature support
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/9] iio: hid-sensor-als: Use channel index to support more hub attributes
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 9/9] HID: amd_sfh: Add light chromaticity for SFH1.1
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v2 8/9] HID: amd_sfh: Add light chromaticity support
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v2 5/9] HID: amd_sfh: Add support for SFH1.1 light color temperature
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v2 4/9] HID: amd_sfh: Add support for light color temperature
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v2 0/9] Support light color temperature and chromaticity
  • From: Basavaraj Natikar <bnatikar@xxxxxxx>
• Re: [PATCH v2 0/9] Support light color temperature and chromaticity
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 45/49] iio: proximity: cros_ec_mkbp: Convert to platform remove callback returning void
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• [PATCH v2 3/3] iio: adc: ad7192: Add fast settling support
  • From: alisadariana@xxxxxxxxx
• [PATCH v2 2/3] iio: adc: ad7192: Improve f_order computation
  • From: alisadariana@xxxxxxxxx
• [PATCH v2 1/3] iio: adc: ad7192: Use bitfield access macros
  • From: alisadariana@xxxxxxxxx
• [PATCH v2 0/3] iio: adc: ad7192: Add improvements and feature
  • From: alisadariana@xxxxxxxxx
• [PATCH v1] iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
  • From: Alexander Zangerl <az@xxxxxxxxxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH 18/49] iio: adc: qcom-pm8xxx-xoadc: Convert to platform remove callback returning void
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 06/49] iio: adc: bcm_iproc: Convert to platform remove callback returning void
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH 24/49] iio: adc: sun4i-gpadc-iio: Convert to platform remove callback returning void
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• Re: [PATCH 08/49] iio: adc: ep93xx: Convert to platform remove callback returning void
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• [PATCH 00/49] iio: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 43/49] iio: position: hid-sensor-custom-intel-hinge: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 44/49] iio: pressure: hid-sensor: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 41/49] iio: orientation: hid-sensor-incl-3d: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 47/49] iio: temperature: hid-sensor: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 42/49] iio: orientation: hid-sensor-rotation: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 04/49] iio: adc: at91: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 38/49] iio: light: hid-sensor-prox: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 20/49] iio: adc: stm32-adc-core: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 40/49] iio: magnetometer: hid-sensor-magn-3d: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 24/49] iio: adc: sun4i-gpadc-iio: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 37/49] iio: light: hid-sensor-als: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 35/49] iio: humidity: hid-sensor-humidity: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>