The following changes since commit b85ea95d086471afb4ad062012a4d73cd328fa86: Linux 6.7-rc1 (2023-11-12 16:19:07 -0800) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.8a for you to fetch changes up to 2dfef50589aef3b9a2fa2190ae95b328fb664f89: iio: adc: ad7091r: Align arguments to function call parenthesis (2023-12-17 14:56:45 +0000) ---------------------------------------------------------------- 1st set of IIO new device support, features and cleanup for 6.8 New device support ------------------ adi,hmc425a * Add support for ADRF5740 attenuators. Minor changes to driver needed alongside new IDs. aosong,ags02ma * New driver for this volatile organic compounds sensor. bosch,bmp280 * Add BMP390 (small amount of refactoring + ID) bosch,bmi323 * New driver to support the BMI323 6-axis IMU. honeywell,hsc030pa * New driver supporting a huge number of SSC and HSC series pressure and temperature sensors. isil,isl76682 * New driver for this simple Ambient Light sensor. liteon,ltr390 * New driver for this ambient and ultraviolet light sensor. maxim,max34408 * New driver to support the MAX34408 and MAX34409 current monitoring ADCs. melexis,mlx90635 * New driver for this Infrared contactless temperature sensor. mirochip,mcp9600 * New driver for this thermocouple EMF convertor. ti,hdc3020 * New driver for this integrated relative humidity and temperature sensor. vishay,veml6075 * New driver for this UVA and UVB light sensor. General features ---------------- Device properties * Add fwnode_property_match_property_string() helper to allow matching single value property against an array of predefined strings. * Use fwnode_property_string_array_count() inside fwnode_property_match_string() instead of open coding the same. checkpatch.pl * Add exclusion of __aligned() from a warning reducing false positives on IIO drivers (and hopefully beyond) IIO Features ------------ core * New light channel modifiers for UVA and UVB. * Add IIO_CHAN_INFO_TROUGH as counterpart to IIO_CHAN_INFO_PEAK so that we can support device that keep running track of the lowest value they have seen in similar fashion to the existing peak tracking. adi,adis library * Use spi cs inactive delay even when a burst reading is performed. As it's now used every time, can centralize the handling in the SPI setup code in the driver. adi,ad2s1210 * Support for fixed-mode to this resolver driver where the A0 and A1 pins are hard wired to config mode in which case position and config must be read from appropriate config registers. * Support reset GPIO if present. adi,ad5791 * Allow configuration of presence of external amplifier in DT binding. adi,adis16400 * Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked if default delays are not quite enough for a specific board. adi,adis16475 * Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked if default delays are not quite enough for a specific board. bosch,bmp280 * Enable multiple chip IDs per family of devices. rohm,bu27008 * Add an illuminance channel calculated from RGB and IR data. Cleanup ------- Minor white space, typos and tidy up not explicitly called out. Core * Check that the available_scan_masks array passed to the IIO core by a driver is sensible by ensuring the entries are ordered so the minimum number of channels is enabled in the earlier entries (as they will be selected if sufficient for the requested channels). * Document that the available_scan_masks infrastructure doesn't currently handle masks that don't fit in a long int. * Improve intensity documentation to reflect that there is no expectation of sensible units (it's dependent on a frequency sensitivity curve) Various * Use new device_property_match_property_string() to replace open coded versions of the same thing. * Fix a few MAINTAINERS filenames. * i2c_get_match_data() and spi_get_device_match_data() pushed into more drivers reducing boilerplate handling. * Some unnecessary headers removed. * ACPI_PTR() removals. It's rarely worth using this. adi,ad7091r (early part of a series adding device support - useful in their own right) * Pass iio_dev directly an event handler rather than relying on broken use of dev_get_drvdata() as drvdata is never set in this driver. * Make sure alert is turned on. adi,ad9467 (general driver fixing up as precursor to iio-backend proposal which is under review for 6.9) * Fix reset gpio handling to match expected polarity. * Always handle error codes from spi_writes. * Add a driver instance local mutex to avoid some races. * Fix scale setting to align with available scale values. * Split array of chip_info structures up into named individual elements. * Convert to regmap. honeywell,mprls0025pa * Drop now unnecessary type references in DT binding for properties in pascals. invensense,mpu6050 * Don't eat a potentially useful return value from regmap_bulk_write() invensense,icm42600 * Use max macro to improve code readability and save a few lines. liteon,ltrf216a * Improve prevision of light intensity. microchip,mcp3911 * Use cleanup.h magic. qcom,spmi* * Fix wrong descriptions of SPMI reg fields in bindings. Other ---- mailmap * Update for Matt Ranostay ---------------------------------------------------------------- Amit Dhingra (1): MAINTAINERS: correct file entry IIO LIGHT SENSOR GAIN-TIME_SCALE HELPERS Ana-Maria Cusco (2): dt-bindings: iio: hmc425a: add entry for ADRF5740 Attenuator iio: amplifiers: hmc425a: add support for ADRF5740 Attenuator Andrew Hepp (2): dt-bindings: iio: Add MCP9600 thermocouple EMF converter iio: temperature: Add MCP9600 thermocouple EMF converter Andy Shevchenko (6): device property: Use fwnode_property_string_array_count() device property: Add fwnode_property_match_property_string() iio: frequency: adf4377: Switch to device_property_match_property_string() iio: frequency: admv1014: Switch to device_property_match_property_string() iio: magnetometer: tmag5273: Switch to device_property_match_property_string() iio: proximity: sx9324: Switch to device_property_match_property_string() Angel Iglesias (4): iio: pressure: bmp280: Use spi_get_device_match_data() iio: pressure: bmp280: Rearrange vars in reverse xmas tree order iio: pressure: bmp280: Allow multiple chips id per family of devices iio: pressure: bmp280: Add support for BMP390 Anshul Dalal (5): dt-bindings: iio: light: add ltr390 iio: light: driver for Lite-On ltr390 dt-bindings: vendor-prefixes: add aosong dt-bindings: iio: chemical: add aosong,ags02ma iio: chemical: add support for Aosong AGS02MA Biju Das (1): iio: pressure: bmp280: Use i2c_get_match_data() Bragatheswaran Manickavel (1): iio/imu: inv_icm42600: Use max() helper macros Colin Ian King (1): iio: imu: Fix spelling mistake "accelrometer" -> "accelerometer" Crt Mori (2): iio: temperature: mlx90635 MLX90635 IR Temperature sensor dt-bindings: iio: temperature: add MLX90635 device David Lechner (2): iio: resolver: ad2s1210: add support for adi,fixed-mode iio: resolver: ad2s1210: add reset gpio support Ivan Mikhaylov (2): dt-bindings: adc: provide max34408/9 device tree binding document iio: adc: Add driver support for MAX34408/9 Jagath Jog J (3): dt-bindings: iio: imu: Add Bosch BMI323 iio: imu: Add driver for BMI323 IMU iio: imu: bmi323: Make the local structures static Javier Carrasco (5): iio: add modifiers for A and B ultraviolet light dt-bindings: iio: light: add support for Vishay VEML6075 iio: light: add VEML6075 UVA and UVB light sensor driver iio: core: introduce trough info element for minimum values iio: ABI: document temperature and humidity peak/trough raw attributes Jiapeng Chong (1): iio: light: isl76682: remove unreachable code Johan Hovold (6): dt-bindings: iio/adc: qcom,spmi-iadc: fix reg description dt-bindings: iio/adc: qcom,spmi-iadc: fix example node name dt-bindings: iio/adc: qcom,spmi-iadc: clean up example dt-bindings: iio/adc: qcom,spmi-rradc: clean up example dt-bindings: iio/adc: qcom,spmi-vadc: fix example node names dt-bindings: iio/adc: qcom,spmi-vadc: clean up examples Jonathan Cameron (1): iio: light: pa1203001: Drop ACPI_PTR() protection. Jun Yan (1): iio: accel: bmi088: update comments and Kconfig Krzysztof Kozlowski (1): dt-bindings: iio: honeywell,mprls0025pa: drop ref from pressure properties Li peiyu (3): iio: pressure: fix some word spelling errors iio: humidity: Add driver for ti HDC302x humidity sensors dt-bindings: iio: humidity: Add TI HDC302x support Linus Walleij (1): iio: proximity: irsd200: Drop unused include Lukas Bulwahn (2): MAINTAINERS: correct file entry in BOSCH SENSORTEC BMI323 IMU IIO DRIVER MAINTAINERS: improve section MICROCHIP MCP3564 ADC DRIVER Marcelo Schmitt (4): scripts: checkpatch: Add __aligned to the list of attribute notes iio: adc: ad7091r: Pass iio_dev to event handler iio: adc: ad7091r: Set alert bit in config register iio: adc: ad7091r: Align arguments to function call parenthesis Marcus Folkesson (1): iio: adc: mcp3911: simplify code with guard macro Marek Vasut (3): dt-bindings: iio: light: isl76682: Document ISL76682 iio: light: isl76682: Add ISL76682 driver doc: iio: Document intensity scale as poorly defined Matt Ranostay (1): mailmap: Change email mapping from previous employers Matti Vaittinen (3): iio: bu27008: Add illuminance channel iio: sanity check available_scan_masks array iio: buffer: document known issue Michael Hennerich (2): dt-bindings: adi,ad5791: Add support for controlling RBUF iio: dac: ad5791: Add support for controlling RBUF via devicetree Nuno Sa (8): iio: adc: ad9467: fix reset gpio handling iio: adc: ad9467: don't ignore error codes iio: adc: ad9467: add mutex to struct ad9467_state iio: adc: ad9467: fix scale setting iio: adc: ad9467: use spi_get_device_match_data() iio: adc: ad9467: use chip_info variables instead of array iio: adc: ad9467: use the more common !val NULL check iio: adc: adi-axi-adc: convert to regmap Petre Rodan (2): dt-bindings: iio: pressure: add honeywell,hsc030 iio: pressure: driver for Honeywell HSC/SSC series Ramona Gradinariu (3): iio: imu: adis: Use spi cs inactive delay dt-bindings: adis16475: Add 'spi-cs-inactive-delay-ns' property dt-bindings: adis16460: Add 'spi-cs-inactive-delay-ns' property Rob Herring (1): dt-bindings: iio/adc: ti,palmas-gpadc: Drop incomplete example Shreeya Patel (1): iio: light: ltrf216a: Return floating point values Su Hui (1): iio: imu: inv_mpu6050: return callee's error code rather than -EINVAL .mailmap | 7 +- Documentation/ABI/testing/sysfs-bus-iio | 42 +- .../bindings/iio/adc/maxim,max34408.yaml | 139 ++ .../bindings/iio/adc/qcom,spmi-iadc.yaml | 10 +- .../bindings/iio/adc/qcom,spmi-rradc.yaml | 4 +- .../bindings/iio/adc/qcom,spmi-vadc.yaml | 9 +- .../bindings/iio/adc/ti,palmas-gpadc.yaml | 15 - .../bindings/iio/amplifiers/adi,hmc425a.yaml | 4 + .../bindings/iio/chemical/aosong,ags02ma.yaml | 47 + .../devicetree/bindings/iio/dac/adi,ad5791.yaml | 5 + .../bindings/iio/humidity/ti,hdc3020.yaml | 55 + .../devicetree/bindings/iio/imu/adi,adis16460.yaml | 4 + .../devicetree/bindings/iio/imu/adi,adis16475.yaml | 4 + .../devicetree/bindings/iio/imu/bosch,bmi323.yaml | 77 + .../bindings/iio/light/liteon,ltr390.yaml | 56 + .../bindings/iio/light/vishay,veml6075.yaml | 39 + .../bindings/iio/pressure/honeywell,hsc030pa.yaml | 142 ++ .../iio/pressure/honeywell,mprls0025pa.yaml | 2 - .../bindings/iio/temperature/melexis,mlx90632.yaml | 19 +- .../iio/temperature/microchip,mcp9600.yaml | 70 + .../devicetree/bindings/trivial-devices.yaml | 2 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + MAINTAINERS | 56 +- drivers/base/property.c | 37 +- drivers/iio/accel/Kconfig | 7 +- drivers/iio/accel/bmi088-accel-core.c | 2 + drivers/iio/accel/bmi088-accel-spi.c | 2 + drivers/iio/adc/Kconfig | 13 +- drivers/iio/adc/Makefile | 1 + drivers/iio/adc/ad7091r-base.c | 15 +- drivers/iio/adc/ad9467.c | 207 +- drivers/iio/adc/adi-axi-adc.c | 159 +- drivers/iio/adc/max34408.c | 276 +++ drivers/iio/adc/mcp3911.c | 64 +- drivers/iio/amplifiers/hmc425a.c | 23 + drivers/iio/chemical/Kconfig | 11 + drivers/iio/chemical/Makefile | 1 + drivers/iio/chemical/ags02ma.c | 165 ++ drivers/iio/dac/ad5791.c | 9 +- drivers/iio/frequency/adf4377.c | 16 +- drivers/iio/frequency/admv1014.c | 31 +- drivers/iio/humidity/hdc3020.c | 473 +++++ drivers/iio/imu/Kconfig | 1 + drivers/iio/imu/Makefile | 1 + drivers/iio/imu/adis.c | 18 +- drivers/iio/imu/bmi323/Kconfig | 33 + drivers/iio/imu/bmi323/Makefile | 7 + drivers/iio/imu/bmi323/bmi323.h | 209 ++ drivers/iio/imu/bmi323/bmi323_core.c | 2139 ++++++++++++++++++++ drivers/iio/imu/bmi323/bmi323_i2c.c | 121 ++ drivers/iio/imu/bmi323/bmi323_spi.c | 92 + drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c | 5 +- drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c | 5 +- drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c | 5 +- drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 9 +- drivers/iio/industrialio-buffer.c | 16 + drivers/iio/industrialio-core.c | 66 + drivers/iio/light/Kconfig | 37 + drivers/iio/light/Makefile | 3 + drivers/iio/light/isl76682.c | 345 ++++ drivers/iio/light/ltr390.c | 196 ++ drivers/iio/light/ltrf216a.c | 10 +- drivers/iio/light/pa12203001.c | 2 +- drivers/iio/light/rohm-bu27008.c | 201 +- drivers/iio/light/veml6075.c | 474 +++++ drivers/iio/magnetometer/tmag5273.c | 10 +- drivers/iio/pressure/Kconfig | 22 + drivers/iio/pressure/Makefile | 3 + drivers/iio/pressure/bmp280-core.c | 42 +- drivers/iio/pressure/bmp280-i2c.c | 8 +- drivers/iio/pressure/bmp280-spi.c | 10 +- drivers/iio/pressure/bmp280.h | 6 +- drivers/iio/pressure/hsc030pa.c | 494 +++++ drivers/iio/pressure/hsc030pa.h | 74 + drivers/iio/pressure/hsc030pa_i2c.c | 69 + drivers/iio/pressure/hsc030pa_spi.c | 61 + drivers/iio/proximity/irsd200.c | 1 - drivers/iio/proximity/sx9324.c | 24 +- drivers/iio/resolver/ad2s1210.c | 162 +- drivers/iio/temperature/Kconfig | 22 + drivers/iio/temperature/Makefile | 2 + drivers/iio/temperature/mcp9600.c | 139 ++ drivers/iio/temperature/mlx90635.c | 1097 ++++++++++ include/linux/iio/adc/adi-axi-adc.h | 4 + include/linux/iio/types.h | 1 + include/linux/property.h | 12 + include/uapi/linux/iio/types.h | 2 + scripts/checkpatch.pl | 1 + tools/iio/iio_event_monitor.c | 2 + 89 files changed, 8176 insertions(+), 409 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/adc/maxim,max34408.yaml create mode 100644 Documentation/devicetree/bindings/iio/chemical/aosong,ags02ma.yaml create mode 100644 Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml create mode 100644 Documentation/devicetree/bindings/iio/imu/bosch,bmi323.yaml create mode 100644 Documentation/devicetree/bindings/iio/light/liteon,ltr390.yaml create mode 100644 Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml create mode 100644 Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml create mode 100644 Documentation/devicetree/bindings/iio/temperature/microchip,mcp9600.yaml create mode 100644 drivers/iio/adc/max34408.c create mode 100644 drivers/iio/chemical/ags02ma.c create mode 100644 drivers/iio/humidity/hdc3020.c create mode 100644 drivers/iio/imu/bmi323/Kconfig create mode 100644 drivers/iio/imu/bmi323/Makefile create mode 100644 drivers/iio/imu/bmi323/bmi323.h create mode 100644 drivers/iio/imu/bmi323/bmi323_core.c create mode 100644 drivers/iio/imu/bmi323/bmi323_i2c.c create mode 100644 drivers/iio/imu/bmi323/bmi323_spi.c create mode 100644 drivers/iio/light/isl76682.c create mode 100644 drivers/iio/light/ltr390.c create mode 100644 drivers/iio/light/veml6075.c create mode 100644 drivers/iio/pressure/hsc030pa.c create mode 100644 drivers/iio/pressure/hsc030pa.h create mode 100644 drivers/iio/pressure/hsc030pa_i2c.c create mode 100644 drivers/iio/pressure/hsc030pa_spi.c create mode 100644 drivers/iio/temperature/mcp9600.c create mode 100644 drivers/iio/temperature/mlx90635.c
