Hello,
With this mail I am submitting bug report that is probably related to iio-trig-hrtimer but there is also the possibility for it to be specific to bmi160 and bmi323.
The described problem have been reproduced on my handheld PC (Asus RC71L) and in another handheld PC with two different gyroscope drivers: bmi323 (backported by me on v6.7, on RC71L) and bmi160.
My target hardware (RC71L that yeld to this discovery) has a bmi323 chip that does not have any interrupt pins reaching the CPU, yet I need to fetch periodically data from said device, therefore I used iio-trig-hrtimer: created a trigger, set the device and trigger sampling frequencies, bound the trigger to the device and enabled buffer: data is being read and available over /dev/iio:device0.
While in this state if I suspend my handheld I receive (from dmesg) the warning reported below and at resume data is not coming out of the iio device and the hrtimer appears to not be working. If I create a new trigger and bind the new trigger to said iio device and re-enable buffer data does come out of /dev/iio:device0 once more, until the next sleep.
Since this is important to me I have taken the time to look at both drivers and iio-trig-hrtimer and I have identified three possible reasons:
1) iio-trig-hrtimer won't work after suspend regardless of how it is used (this is what I believe is the cause)
2) iio-trig-hrtimer is stopped by the -ESHTDOWN returned by the function printing "Transfer while suspended", however that stack trace does not include function calls related to iio-trig-hrtimer and this seems less plausible
3) bmi160 and bmi323 appears to be similar and maybe are sharing a common bug with suspend (this is also why I have maintainers of those drivers in the recipient list)
Thanks for your time, patience and understanding,
Denis Benato
This one is from my device:
[ 635.956648] ------------[ cut here ]------------
[ 635.956649] i2c i2c-1: Transfer while suspended
[ 635.956663] WARNING: CPU: 9 PID: 848 at __i2c_transfer+0xaf/0x6e0
[ 635.956670] Modules linked in: ccm rfcomm ntfs3 snd_seq_dummy snd_hrtimer snd_seq cmac algif_hash algif_skcipher af_alg bnep iio_trig_hrtimer iio_trig_sysfs hid_playstation led_class_multicolor industrialio_sw_trigger uhid industrialio_configfs snd_sof_amd_acp63 snd_sof_amd_rembrandt mt7921e snd_sof_amd_renoir mt7921_common snd_sof_amd_acp snd_usb_audio hid_logitech_hidpp snd_sof_xtensa_dsp mt792x_lib snd_sof_pci r8153_ecm mt76_connac_lib cdc_ether snd_ump snd_sof snd_usbmidi_lib mt76 usbnet snd_rawmidi snd_hda_codec_realtek snd_sof_utils snd_seq_device snd_hda_scodec_cs35l41_spi mc snd_hda_codec_generic intel_rapl_msr mac80211 hid_multitouch snd_hda_codec_hdmi snd_soc_core snd_compress ac97_bus snd_pcm_dmaengine snd_pci_ps intel_rapl_common snd_hda_intel edac_mce_amd snd_intel_dspcfg snd_rpl_pci_acp6x snd_acp_pci snd_hda_codec snd_acp_legacy_common kvm_amd snd_hda_core snd_pci_acp6x snd_pci_acp5x snd_hwdep btusb snd_rn_pci_acp3x snd_hda_scodec_cs35l41_i2c snd_acp_config btrtl snd_pcm snd_hda_scodec_cs35l41 bmi323_i2c
[ 635.956705] btmtk btbcm bmi323_core kvm snd_hda_cs_dsp_ctls cfg80211 btintel snd_soc_acpi snd_timer uas ucsi_acpi cs_dsp xpad industrialio_triggered_buffer irqbypass crct10dif_pclmul polyval_clmulni polyval_generic bluetooth r8152 joydev ghash_clmulni_intel snd_soc_cs35l41_lib ecdh_generic sha1_ssse3 rapl ecc usb_storage mii pcspkr asus_nb_wmi wmi_bmof efi_pstore typec_ucsi kfifo_buf k10temp i2c_piix4 snd ff_memless snd_pci_acp3x nls_iso8859_1 libarc4 soundcore ccp typec hid_logitech_dj usbmouse usbkbd i2c_hid_acpi i2c_hid industrialio amd_pmc serial_multi_instantiate input_leds mac_hid sch_fq_codel crypto_user nfnetlink dmi_sysfs ip_tables x_tables autofs4 hid_asus asus_wmi ledtrig_audio sparse_keymap platform_profile hid_generic usbhid hid btrfs mmc_block amdgpu drm_buddy drm_suballoc_helper raid6_pq xor libcrc32c drm_exec i2c_algo_bit drm_display_helper cec gpu_sched amdxcp drm_ttm_helper ttm drm_kms_helper video crc32_pclmul sha512_ssse3 drm sha256_ssse3 nvme sdhci_pci nvme_core cqhci serio_raw xhci_pci sdhci
[ 635.956752] xhci_pci_renesas wmi overlay aesni_intel crypto_simd cryptd
[ 635.956755] CPU: 9 PID: 848 Comm: irq/90-bmi323-i Tainted: G W 6.7.0--xanmod1-neroreflex-1 #1
[ 635.956758] Hardware name: ASUSTeK COMPUTER INC. ROG Ally RC71L_RC71L/RC71L, BIOS RC71L.335 11/29/2023
[ 635.956759] RIP: 0010:__i2c_transfer+0xaf/0x6e0
[ 635.956761] Code: 00 00 48 85 c0 0f 84 2a 06 00 00 48 8b 30 48 8b 93 c0 00 00 00 48 85 d2 75 04 48 8b 53 70 48 c7 c7 9a 5e aa 99 e8 31 57 3e ff <0f> 0b e9 2e 04 00 00 ba 02 00 00 00 41 83 ff 02 0f 85 dd 01 00 00
[ 635.956763] RSP: 0018:ffffbf33c160bbf8 EFLAGS: 00010246
[ 635.956764] RAX: 41e9eaf9bb59b300 RBX: ffff9f8f013a28e8 RCX: 0000000000000027
[ 635.956765] RDX: ffffffff9a235ab8 RSI: 0000000000000002 RDI: ffff9f9152261888
[ 635.956766] RBP: 00000000ffffff94 R08: 80000000ffffe5fd R09: 656c696877207265
[ 635.956767] R10: 0000000000000023 R11: 0a6465646e657073 R12: 0000000000000000
[ 635.956768] R13: 0000000000000003 R14: ffffbf33c160bc50 R15: 0000000000000002
[ 635.956769] FS: 0000000000000000(0000) GS:ffff9f9152240000(0000) knlGS:0000000000000000
[ 635.956770] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 635.956771] CR2: 0000020b0a053000 CR3: 000000028ae10000 CR4: 0000000000750ef0
[ 635.956773] PKRU: 55555554
[ 635.956773] Call Trace:
[ 635.956775] <TASK>
[ 635.956777] ? __warn+0x13c/0x1f0
[ 635.956779] ? __i2c_transfer+0xaf/0x6e0
[ 635.956781] ? report_bug+0x16e/0x1f0
[ 635.956784] ? handle_bug+0x42/0x70
[ 635.956786] ? exc_invalid_op+0x16/0x50
[ 635.956788] ? asm_exc_invalid_op+0x16/0x20
[ 635.956791] ? __i2c_transfer+0xaf/0x6e0
[ 635.956793] ? __i2c_transfer+0xaf/0x6e0
[ 635.956794] i2c_transfer+0xe3/0x110
[ 635.956798] bmi323_regmap_i2c_read+0x7b/0xc0 [bmi323_i2c]
[ 635.956803] _regmap_raw_read+0x11d/0x200
[ 635.956806] regmap_raw_read+0x26a/0x2c0
[ 635.956807] ? __schedule+0x604/0x16b0
[ 635.956810] regmap_bulk_read+0x17b/0x200
[ 635.956813] ? iio_store_to_kfifo+0x11/0x30 [kfifo_buf]
[ 635.956818] bmi323_trigger_handler+0x52/0x160 [bmi323_core]
[ 635.956824] irq_thread_fn+0x18/0x50
[ 635.956826] irq_thread+0x21a/0x3c0
[ 635.956828] ? wake_up_and_wait_for_irq_thread_ready+0x190/0x190
[ 635.956830] ? irq_forced_thread_fn+0x110/0x110
[ 635.956831] kthread+0x26c/0x2b0
[ 635.956833] ? irq_forced_secondary_handler+0x20/0x20
[ 635.956835] ? kthreadd+0x300/0x300
[ 635.956836] ret_from_fork+0x2e/0x40
[ 635.956838] ? kthreadd+0x300/0x300
[ 635.956839] ret_from_fork_asm+0x11/0x20
[ 635.956841] </TASK>
[ 635.956842] ---[ end trace 0000000000000000 ]---
The following is from the other device (amd 5600u):
[ 67.131064] ------------[ cut here ]------------
[ 67.131067] i2c i2c-1: Transfer while suspended
[ 67.131078] WARNING: CPU: 1 PID: 1655 at drivers/i2c/i2c-core.h:54 __i2c_transfer+0x594/0x6b0
[ 67.131090] Modules linked in: iio_trig_hrtimer iio_trig_sysfs industrialio_sw_trigger industrialio_configfs ccm rfcomm cmac algif_hash algif_skcipher af_alg snd_seq_dummy snd_hrtimer snd_seq snd_seq_device exfat bnep wl(POE) intel_rapl_msr zenergy(OE) intel_rapl_common mousedev joydev snd_sof_amd_rembrandt snd_sof_amd_renoir snd_sof_amd_acp snd_sof_pci mt7921e snd_sof_xtensa_dsp mt7921_common snd_hda_codec_realtek snd_sof mt792x_lib snd_hda_codec_generic snd_sof_utils mt76_connac_lib cdc_mbim cdc_wdm edac_mce_amd ledtrig_audio snd_hda_codec_hdmi snd_soc_core mt76 kvm_amd snd_hda_intel snd_compress snd_intel_dspcfg ac97_bus mac80211 snd_pcm_dmaengine
[ 67.131146] ACPI Error:
[ 67.131147] snd_intel_sdw_acpi kvm btusb snd_pci_ps
[ 67.131151] No handler for Region [ECRM] (00000000b2bf81c9) [EmbeddedControl]
[ 67.131152] btrtl snd_hda_codec
[ 67.131155] (20230628/evregion-130)
[ 67.131155] snd_rpl_pci_acp6x libarc4 snd_acp_pci
[ 67.131158] ACPI Error:
[ 67.131159] irqbypass
[ 67.131161] Region EmbeddedControl (ID=3) has no handler
[ 67.131165] btintel
[ 67.131166] (20230628/exfldio-261)
[ 67.131169] snd_hda_core snd_acp_legacy_common btbcm crct10dif_pclmul
[ 67.131176] ACPI Error:
[ 67.131176] bmi160_spi
[ 67.131178] Aborting method
[ 67.131178] snd_pci_acp6x
[ 67.131180] \_SB.GPIO._EVT
[ 67.131180] snd_hwdep
[ 67.131182] due to previous error (AE_NOT_EXIST)
[ 67.131182] btmtk
[ 67.131183] (20230628/psparse-529)
[ 67.131183] polyval_clmulni cfg80211 snd_pcm polyval_generic snd_pci_acp5x gf128mul cdc_ncm snd_timer snd_rn_pci_acp3x bluetooth hid_multitouch ghash_clmulni_intel cdc_ether bmi160_i2c snd_acp_config snd usbnet sha1_ssse3 vfat bmi160_core snd_soc_acpi oxp_sensors fat rapl ecdh_generic wmi_bmof industrialio_triggered_buffer mii pcspkr rfkill k10temp i2c_piix4 snd_pci_acp3x soundcore ccp kfifo_buf i2c_hid_acpi soc_button_array i2c_hid industrialio mac_hid xpad ff_memless uinput ec_sys crypto_user fuse loop nfnetlink ip_tables x_tables uas usbhid usb_storage amdgpu btrfs drm_exec blake2b_generic amdxcp xor drm_buddy raid6_pq gpu_sched libcrc32c crc32_pclmul i2c_algo_bit sha512_ssse3 drm_suballoc_helper serio_raw sha256_ssse3 drm_ttm_helper atkbd aesni_intel libps2 ttm nvme vivaldi_fmap crypto_simd drm_display_helper nvme_core cryptd video i8042 cec nvme_common wmi serio overlay ext4 crc32c_generic crc32c_intel crc16 mbcache jbd2 dm_mod
[ 67.131318] CPU: 1 PID: 1655 Comm: irq/70-i2c-BMI0 Tainted: P OE 6.6.7-chos5-chimeraos-1 #1 011c184bc075678bbf5f825a76fa2f06741839b6
[ 67.131324] Hardware name: ONE-NETBOOK TECHNOLOGY CO., LTD. ONE XPLAYER/ONE XPLAYER, BIOS V1.08_P4C8M43L6 04/28/2022
[ 67.131327] RIP: 0010:__i2c_transfer+0x594/0x6b0
[ 67.131334] Code: 8b af c0 00 00 00 48 85 ed 75 04 48 8b 6f 70 48 8d 7b 70 e8 ae 92 ea ff 48 89 ea 48 c7 c7 c8 f0 ed 82 48 89 c6 e8 2c e7 63 ff <0f> 0b bd 94 ff ff ff e9 fc fb ff ff 48 c7 c6 50 95 9e 82 48 c7 c7
[ 67.131336] RSP: 0018:ffffc90012623cb0 EFLAGS: 00010286
[ 67.131339] RAX: 0000000000000000 RBX: ffff8881017c68e8 RCX: 0000000000000027
[ 67.131342] RDX: ffff888360e616c8 RSI: 0000000000000001 RDI: ffff888360e616c0
[ 67.131344] RBP: ffff888100e0de38 R08: ffffffff83756c80 R09: 000000008407cebb
[ 67.131345] R10: ffffffffffffffff R11: 0000000000000100 R12: 0000000000000002
[ 67.131347] R13: ffff888110836c00 R14: 0000000000000000 R15: ffff888110836c00
[ 67.131348] FS: 0000000000000000(0000) GS:ffff888360e40000(0000) knlGS:0000000000000000
[ 67.131351] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 67.131352] CR2: 0000000000000000 CR3: 000000024ec20000 CR4: 0000000000750ee0
[ 67.131354] PKRU: 55555554
[ 67.131356] Call Trace:
[ 67.131358] <TASK>
[ 67.131359] ? __i2c_transfer+0x594/0x6b0
[ 67.131363] ? __warn+0x81/0x130
[ 67.131373] ? __i2c_transfer+0x594/0x6b0
[ 67.131377] ? report_bug+0x171/0x1a0
[ 67.131382] ? srso_alias_return_thunk+0x5/0x7f
[ 67.131387] ? console_unlock+0xcb/0x120
[ 67.131394] ? handle_bug+0x3c/0x80
[ 67.131399] ? exc_invalid_op+0x17/0x70
[ 67.131402] ? asm_exc_invalid_op+0x1a/0x20
[ 67.131411] ? __i2c_transfer+0x594/0x6b0
[ 67.131417] i2c_transfer+0x4f/0x100
[ 67.131421] regmap_i2c_read+0x73/0xb0
[ 67.131428] _regmap_raw_read+0xe6/0x230
[ 67.131434] regmap_raw_read+0x25c/0x2c0
[ 67.131440] regmap_bulk_read+0x1e4/0x290
[ 67.131448] bmi160_trigger_handler+0x56/0x100 [bmi160_core 01d2f0c9a6f31373f2aa6b38a031d29ec6d3cd40]
[ 67.131457] ? __pfx_irq_thread_fn+0x10/0x10
[ 67.131461] irq_thread_fn+0x23/0x60
[ 67.131466] irq_thread+0xfe/0x1c0
[ 67.131470] ? __pfx_irq_thread_dtor+0x10/0x10
[ 67.131475] ? __pfx_irq_thread+0x10/0x10
[ 67.131478] kthread+0xe8/0x120
[ 67.131484] ? __pfx_kthread+0x10/0x10
[ 67.131488] ret_from_fork+0x34/0x50
[ 67.131493] ? __pfx_kthread+0x10/0x10
[ 67.131496] ret_from_fork_asm+0x1b/0x30
[ 67.131506] </TASK>
[ 67.131507] ---[ end trace 0000000000000000 ]---
For reference I place here the bash file that is used to reproduce the issue:
#!/bin/bash
modprobe industrialio-sw-trigger
modprobe iio-trig-sysfs
modprobe iio-trig-hrtimer
# hrtimer
if [ ! -d "/home/config" ]; then
mkdir -p /home/config
fi
mount -t configfs none /home/config
mkdir -p /home/config/iio/triggers/hrtimer/rogue
# set sampling frequency for rogue
for i in /sys/bus/iio/devices/* ; do
if [ -d "$i" ]; then
if [ -f "$i/name" ]; then
name=$(cat "$i/name")
if [ "$name" = "rogue" ]; then
echo "1600" > "$i/sampling_frequency"
fi
fi
fi
done
# set the gyroscope
for i in /sys/bus/iio/devices/* ; do
if [ -d "$i" ]; then
if [ -f "$i/name" ]; then
name=$(cat "$i/name")
if [ "$name" = "bmi323-imu" ]; then
# change chip sampling frequency
echo "1600.000000" > "$i/in_accel_sampling_frequency"
echo "1600.000000" > "$i/in_anglvel_sampling_frequency"
# enable accel data acquisition
echo 1 > "$i/scan_elements/in_accel_x_en"
echo 1 > "$i/scan_elements/in_accel_y_en"
echo 1 > "$i/scan_elements/in_accel_z_en"
# enable gyroscope data acquisition
echo 1 > "$i/scan_elements/in_anglvel_x_en"
echo 1 > "$i/scan_elements/in_anglvel_y_en"
echo 1 > "$i/scan_elements/in_anglvel_z_en"
# enable timestamp reporting
echo 1 > "$i/scan_elements/in_timestamp_en"
# bind rogue hrtimer to to the iio device
echo "rogue" > "$i/trigger/current_trigger"
# enable the buffer
echo 1 > "$i/buffer0/enable"
echo "bmi323-imu buffer started"
fi
fi
fi
done
