On Wed, Jan 10, 2024 at 01:49:52PM -0600, David Lechner wrote: > This adds a new binding for a PWM trigger and DMA data output connected > to an SPI controller offload instance. > > Signed-off-by: David Lechner <dlechner@xxxxxxxxxxxx> > --- > .../adi,spi-offload-pwm-trigger-dma-buffer.yaml | 59 ++++++++++++++++++++++ > 1 file changed, 59 insertions(+) > > diff --git a/Documentation/devicetree/bindings/iio/offload/adi,spi-offload-pwm-trigger-dma-buffer.yaml b/Documentation/devicetree/bindings/iio/offload/adi,spi-offload-pwm-trigger-dma-buffer.yaml > new file mode 100644 > index 000000000000..748cfab19eff > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/offload/adi,spi-offload-pwm-trigger-dma-buffer.yaml > @@ -0,0 +1,59 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/offload/adi,spi-offload-pwm-trigger-dma-buffer.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: SPI Offload with PWM Trigger and DMA Buffer Data Output > + > +maintainers: > + - Michael Hennerich <Michael.Hennerich@xxxxxxxxxx> > + - Nuno Sá <nuno.sa@xxxxxxxxxx> > + > +description: | > + This binding describes the connection of a PWM device to the trigger input > + and a DMA channel to the output data stream of a SPI Offload instance. > + > + https://wiki.analog.com/resources/fpga/peripherals/spi_engine/offload > + https://wiki.analog.com/resources/fpga/peripherals/spi_engine/tutorial > + > +$ref: /schemas/spi/adi,axi-spi-engine.yaml#/$defs/offload Not really worth the complexity just for 'reg'. Generally, the bus schema would define general constraints on reg like range of address values and the device schema (this one) is just how many entries. > + > +properties: > + compatible: > + const: adi,spi-offload-pwm-trigger-dma-buffer > + > + reg: > + maxItems: 1 > + > + pwms: > + maxItems: 1 > + > + dmas: > + maxItems: 1 > + > +required: > + - compatible > + - pwms > + - dmas > + > +unevaluatedProperties: false > + > +examples: > + - | > + spi { > + #address-cells = <1>; > + #size-cells = <0>; > + > + offloads { > + #address-cells = <1>; > + #size-cells = <0>; > + > + offload@0 { > + compatible = "adi,spi-offload-pwm-trigger-dma-buffer"; > + reg = <0>; > + pwms = <&pwm 0>; > + dmas = <&dma 0>; > + }; > + }; Just make one complete example for the device. > + }; > > -- > 2.43.0 >