Linux IIO Development

• Thread Index

• Re: [PATCH 1/2] iio: light: add VEML6075 UVA and UVB light sensor driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Ceclan Dumitru <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH v3] Added tilt interrupt support in inv_icm42600
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: pressure: add honeywell,hsc030
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] Added tilt interrupt support in inv_icm42600
  • From: Hiten Chauhan <hiten.chauhan@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: pressure: add honeywell,hsc030
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/1] Added tilt interrupt support in inv_icm42600
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: pressure: add honeywell,hsc030
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: pressure: driver for Honeywell HSC/SSC series pressure sensors
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: light: isl76682: Add ISL76682 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH V2 0/3] iio: adc: Add support for QCOM SPMI PMIC5 Gen3 ADC
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: light: add support for Vishay VEML6075
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: pressure: add honeywell,hsc030
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: pressure: add honeywell,hsc030
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: adc: add AD7173
  • From: kernel test robot <yujie.liu@xxxxxxxxx>
• Re: [PATCH 1/2] iio: light: add VEML6075 UVA and UVB light sensor driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v3 2/2] iio: light: isl76682: Add ISL76682 driver
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: light: isl76682: Document ISL76682
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: pressure: add honeywell,hsc030
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: light: isl76682: Document ISL76682
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 1/2] iio: light: add VEML6075 UVA and UVB light sensor driver
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: isl76682: Add ISL76682 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2 3/3] dt-bindings: iio/adc: Move QCOM ADC bindings to iio/adc folder
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: light: isl76682: Document ISL76682
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: light: add VEML6075 UVA and UVB light sensor driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: light: add support for Vishay VEML6075
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: light: add VEML6075 UVA and UVB light sensor driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: pressure: add honeywell,hsc030
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: dac: add MCP4821
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: humidity: Add TI HDC302x support
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: light: add VEML6075 UVA and UVB light sensor driver
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 1/2] iio: light: add VEML6075 UVA and UVB light sensor driver
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: light: add support for Vishay VEML6075
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 0/2] iio: light: add support for VEML6075 UVA and UVB light sensor
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH 2/2] iio: dac: driver for MCP4821
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: supporting binary (near-far) proximity sensors over gpio
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: iio: humidity: Add TI HDC302x support
  • From: Li peiyu <579lpy@xxxxxxxxx>
• [PATCH v2 1/2] iio: humidity: Add driver for ti HDC302x humidity sensors
  • From: Li peiyu <579lpy@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: pressure: driver for Honeywell HSC/SSC series pressure sensors
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2 2/2] iio: light: isl76682: Add ISL76682 driver
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: light: isl76682: Document ISL76682
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] checkpatch: add judgment condition for Kconfig help test
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• Re: [PATCH] checkpatch: add judgment condition for Kconfig help test
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: pressure: add honeywell,hsc030
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: pressure: add honeywell,hsc030
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• supporting binary (near-far) proximity sensors over gpio
  • From: Sicelo <absicsz@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: driver for Lite-On ltr390
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: pressure: add honeywell,hsc030
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 2/2] iio: pressure: driver for Honeywell HSC/SSC series pressure sensors
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: pressure: add honeywell,hsc030
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v3] Added tilt interrupt support in inv_icm42600
  • From: Hiten Chauhan <hiten.chauhan@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: driver for Lite-On ltr390
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: light: add ltr390
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/2] iio: light: driver for Lite-On ltr390
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: light: add ltr390
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• [PATCH 2/2] iio: dac: driver for MCP4821
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: dac: add MCP4821
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• Re: [PATCH [1/2]] iio: humidity: Add driver for ti HDC302x humidity sensors
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] checkpatch: add judgment condition for Kconfig help test
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: adc: adding support for PAC193X
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: adc: adding support for PAC193X
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] iio: light: pa1203001: Drop ACPI_PTR() protection.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: honeywell,mprls0025pa.yaml: fix function numbering
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH] iio: honeywell,mprls0025pa.yaml: fix function numbering
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] Added tilt interrupt support in inv_icm42600
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: adc: adding support for PAC193X
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: adc: add AD7173
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: isl76682: Add ISL76682 driver
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 2/2] iio: light: isl76682: Add ISL76682 driver
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH 1/3] iio: addac: add new converter framework
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH V2 3/3] dt-bindings: iio/adc: Move QCOM ADC bindings to iio/adc folder
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 4/6] arm64: dts: qcom: sm8350: Fix remoteproc interrupt type
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: adc: adding support for PAC193X
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: adc: add AD7173
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: adc: add AD7173
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: isl76682: Add ISL76682 driver
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: [PATCH [2/2]] dt-bindings: iio: humidity: Add TI HDC302x support
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: isl76682: Document ISL76682
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v4 2/2] iio: adc: ad7173: add AD7173 driver
  • From: mitrutzceclan <mitrutzceclan@xxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: adc: add AD7173
  • From: mitrutzceclan <mitrutzceclan@xxxxxxxxx>
• [PATCH v2 1/1] Added tilt interrupt support in inv_icm42600
  • From: Hiten Chauhan <hiten.chauhan@xxxxxxxxxxxxxxxxx>
• Sorry,please ingore this email,this one is no is no different from the previous one.
  • From: peiyu li <579lpy@xxxxxxxxx>
• [PATCH [2/2]] dt-bindings: iio: humidity: Add TI HDC302x support
  • From: Li peiyu <579lpy@xxxxxxxxx>
• [PATCH 2/2] iio: light: isl76682: Add ISL76682 driver
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH 1/2] dt-bindings: iio: light: isl76682: Document ISL76682
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH [1/2]] iio: humidity: Add driver for ti HDC302x humidity sensors
  • From: Li peiyu <579lpy@xxxxxxxxx>
• [PATCH [1/2]] iio: humidity: Add driver for ti HDC302x humidity sensors
  • From: Li peiyu <579lpy@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: frequency: add admfm2000
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 06/11] iio: adc: Add QCOM PMIC5 Gen3 ADC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V2 3/3] dt-bindings: iio/adc: Move QCOM ADC bindings to iio/adc folder
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V2 1/3] dt-bindings: iio: adc: Add QCOM PMIC5 Gen3 ADC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 06/11] iio: adc: Add QCOM PMIC5 Gen3 ADC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] iio: adc: imx93: add four channels for imx93 adc
  • From: haibo.chen@xxxxxxx
• Re: [PATCH V2 0/3] iio: adc: Add support for QCOM SPMI PMIC5 Gen3 ADC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V2 0/3] iio: adc: Add support for QCOM SPMI PMIC5 Gen3 ADC
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH V2 0/3] iio: adc: Add support for QCOM SPMI PMIC5 Gen3 ADC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH V2 3/3] dt-bindings: iio/adc: Move QCOM ADC bindings to iio/adc folder
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [PATCH V2 2/3] iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [PATCH V2 1/3] dt-bindings: iio: adc: Add QCOM PMIC5 Gen3 ADC bindings
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [PATCH V2 0/3] iio: adc: Add support for QCOM SPMI PMIC5 Gen3 ADC
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH 10/11] ARM: dts: qcom: Update devicetree for QCOM ADC bindings path change
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH 09/11] iio: adc: Update QCOM ADC drivers for bindings path change
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH 07/11] iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH 06/11] iio: adc: Add QCOM PMIC5 Gen3 ADC bindings
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH 03/11] ARM: dts: qcom: Update devicetree for ADC7 rename for QCOM PMICs
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [PATCH 2/2] iio: frequency: admfm2000: New driver
  • From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: frequency: add admfm2000
  • From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: trivial-devices: add aosong,ags02ma
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 0/2] adding support for Microchip PAC193X Power Monitor
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: trivial-devices: add aosong,ags02ma
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: trivial-devices: add aosong,ags02ma
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: adc: ad7192: Add AD7194 support
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 2/4] iio: adc: ad7192: Use device api
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v3 0/2] adding support for Microchip PAC193X Power Monitor
  • From: <marius.cristea@xxxxxxxxxxxxx>
• [PATCH v3 2/2] iio: adc: adding support for PAC193x
  • From: <marius.cristea@xxxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: adc: adding support for PAC193X
  • From: <marius.cristea@xxxxxxxxxxxxx>
• [PATCH v2 3/3] iio: chemical: add support for Aosong AGS02MA
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: vendor-prefixes: add aosong
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: trivial-devices: add aosong,ags02ma
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: adc: ad7192: Add AD7194 support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 3/4] dt-bindings: iio: adc: ad7192: Add AD7194 support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: iio: adc: ad7192: Add properties
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 4/4] iio: adc: ad7192: Add AD7194 support
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v2 3/4] dt-bindings: iio: adc: ad7192: Add AD7194 support
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v2 2/4] iio: adc: ad7192: Use device api
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: iio: adc: ad7192: Add properties
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v2 0/4] iio: adc: ad7192: Add support for AD7194
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: adc: ad7192: Add AD7194 support
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: adc: ad7192: Add AD7194 support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 04/17] dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatibles for existing SoC
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: adc: ad7192: Add AD7194 support
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: ad7192: Use device api
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• Re: [PATCH 00/17] dt-bindings: samsung: add specific compatibles for existing SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 05/17] dt-bindings: pinctrl: samsung: add specific compatibles for existing SoC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC PATCH 1/3] iio: addac: add new converter framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [RFC PATCH 1/3] iio: addac: add new converter framework
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: hmc425a: add entry for ADRF5740 Attenuator
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: hmc425a: add entry for ADRF5740 Attenuator
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v3 2/2] dt-bindings: iio: hmc425a: add entry for ADRF5740 Attenuator
  • From: Ana-Maria Cusco <anamaria.cuscoo@xxxxxxxxx>
• [PATCH v3 0/2] Add ADRF5740 driver
  • From: Ana-Maria Cusco <anamaria.cuscoo@xxxxxxxxx>
• [PATCH v3 1/2] iio: amplifiers: hmc425a: add support for ADRF5740 Attenuator
  • From: Ana-Maria Cusco <anamaria.cuscoo@xxxxxxxxx>
• Re: [PATCH v2] iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
  • From: patchwork-bot+chrome-platform@xxxxxxxxxx
• Re: [PATCH 00/49] iio: Convert to platform remove callback returning void
  • From: patchwork-bot+chrome-platform@xxxxxxxxxx
• Re: [PATCH v2] iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
  • From: patchwork-bot+chrome-platform@xxxxxxxxxx
• Re: [PATCH 00/49] iio: Convert to platform remove callback returning void
  • From: patchwork-bot+chrome-platform@xxxxxxxxxx
• Re: [PATCH 1/2] dt-bindings: iio: temperature: Add AMS AS6200
  • From: Abdel Alkuor <alkuor@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: temperature: Add AMS AS6200
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 5/6] dt-bindings: arm: qcom: Add oneplus-lemonade(p)
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 6/6] arm64: dts: qcom: sm8350-lemonade(p): New devices
  • From: Nia Espera <nespera@xxxxxxxxxx>
• [PATCH v4 0/6] support oneplus-lemonade(p) devices
  • From: Nia Espera <nespera@xxxxxxxxxx>
• [PATCH v4 3/6] arm64: dts: qcom: pm8350k: Remove hanging whitespace
  • From: Nia Espera <nespera@xxxxxxxxxx>
• [PATCH v4 2/6] arm64: dts: qcom: sm8350: Fix DMA0 address
  • From: Nia Espera <nespera@xxxxxxxxxx>
• [PATCH v4 4/6] arm64: dts: qcom: sm8350: Fix remoteproc interrupt type
  • From: Nia Espera <nespera@xxxxxxxxxx>
• [PATCH v4 5/6] dt-bindings: arm: qcom: Add oneplus-lemonade(p)
  • From: Nia Espera <nespera@xxxxxxxxxx>
• [PATCH v4 1/6] dt-bindings: iio: adc: qcom: Add Qualcomm smb139x
  • From: Nia Espera <nespera@xxxxxxxxxx>
• [PATCH 2/2] iio: temperature: Add support for AMS AS6200
  • From: Abdel Alkuor <alkuor@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: temperature: Add AMS AS6200
  • From: Abdel Alkuor <alkuor@xxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 8728c14129df7a6e29188a2e737b4774fb200953
  • From: kernel test robot <lkp@xxxxxxxxx>
• RE: [PATCH 17/17] arm64: dts: exynosautov9: add specific compatibles to several blocks
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• RE: [PATCH 16/17] arm64: dts: exynos850: add specific compatibles to several blocks
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• RE: [PATCH 15/17] arm64: dts: exynos7885: add specific compatibles to several blocks
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• RE: [PATCH 14/17] arm64: dts: exynos7: add specific compatibles to several blocks
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• RE: [PATCH 13/17] arm64: dts: exynos5433: add specific compatibles to several blocks
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• RE: [PATCH 12/17] dt-bindings: pwm: samsung: add specific compatibles for existing SoC
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• RE: [PATCH 11/17] ASoC: dt-bindings: samsung-i2s: add specific compatibles for existing SoC
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• RE: [PATCH 10/17] dt-bindings: iio: samsung,exynos-adc: add specific compatibles for existing SoC
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• RE: [PATCH 09/17] dt-bindings: gpu: arm,mali-midgard: add specific compatibles for existing Exynos SoC
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• RE: [PATCH 08/17] dt-bindings: samsung: exynos-pmu: add specific compatibles for existing SoC
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• RE: [PATCH 07/17] dt-bindings: serial: samsung: add specific compatibles for existing SoC
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• RE: [PATCH 06/17] dt-bindings: rtc: s3c-rtc: add specific compatibles for existing SoC
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• RE: [PATCH 05/17] dt-bindings: pinctrl: samsung: add specific compatibles for existing SoC
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• RE: [PATCH 04/17] dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatibles for existing SoC
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• RE: [PATCH 03/17] dt-bindings: i2c: samsung,s3c2410-i2c: add specific compatibles for existing SoC
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• Re: [PATCH 10/11] ARM: dts: qcom: Update devicetree for QCOM ADC bindings path change
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH 12/17] dt-bindings: pwm: samsung: add specific compatibles for existing SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 11/17] ASoC: dt-bindings: samsung-i2s: add specific compatibles for existing SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 10/17] dt-bindings: iio: samsung,exynos-adc: add specific compatibles for existing SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 09/17] dt-bindings: gpu: arm,mali-midgard: add specific compatibles for existing Exynos SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 08/17] dt-bindings: samsung: exynos-pmu: add specific compatibles for existing SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 07/17] dt-bindings: serial: samsung: add specific compatibles for existing SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 06/17] dt-bindings: rtc: s3c-rtc: add specific compatibles for existing SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 05/17] dt-bindings: pinctrl: samsung: add specific compatibles for existing SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 04/17] dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatibles for existing SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 03/17] dt-bindings: i2c: samsung,s3c2410-i2c: add specific compatibles for existing SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 02/17] dt-bindings: i2c: exynos5: add specific compatibles for existing SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: PSA: This list is being migrated (no action required)
  • From: Konstantin Ryabitsev <konstantin@xxxxxxxxxxxxxxxxxxx>
• PSA: This list is being migrated (no action required)
  • From: Konstantin Ryabitsev <konstantin@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: adding dt-bindings for PAC193X
  • From: <Marius.Cristea@xxxxxxxxxxxxx>
• Re: [PATCH 02/17] dt-bindings: i2c: exynos5: add specific compatibles for existing SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 03/11] ARM: dts: qcom: Update devicetree for ADC7 rename for QCOM PMICs
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 03/17] dt-bindings: i2c: samsung,s3c2410-i2c: add specific compatibles for existing SoC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 03/17] dt-bindings: i2c: samsung,s3c2410-i2c: add specific compatibles for existing SoC
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 02/17] dt-bindings: i2c: exynos5: add specific compatibles for existing SoC
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• RE: [PATCH 02/17] dt-bindings: i2c: exynos5: add specific compatibles for existing SoC
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• RE: [PATCH 01/17] dt-bindings: hwinfo: samsung,exynos-chipid: add specific compatibles for existing SoC
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• [PATCH] iio: imu: Add tilt interrupt support for inv_icm42600
  • From: Hiten Chauhan <hiten.chauhan@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: add ltr390
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: add ltr390
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: add ltr390
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 5/6] dt-bindings: arm: qcom: Add oneplus-lemonade(p)
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: iio: adc: add smb139x
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: driver for Lite-On ltr390
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• Re: [PATCH 2/2] iio: light: driver for Lite-On ltr390
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/2] iio: light: driver for Lite-On ltr390
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: light: add ltr390
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: trivial-devices: add asair,ags02ma
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 03/11] ARM: dts: qcom: Update devicetree for ADC7 rename for QCOM PMICs
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: amplifiers: hmc425a: add support for ADRF5740 Attenuator
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 06/17] dt-bindings: rtc: s3c-rtc: add specific compatibles for existing SoC
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v3 6/6] arm64: dts: qcom: sm8350-lemonade(p): New devices
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 01/17] dt-bindings: hwinfo: samsung,exynos-chipid: add specific compatibles for existing SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 6/6] arm64: dts: qcom: sm8350-lemonade(p): New devices
  • From: Nia Espera <nespera@xxxxxxxxxx>
• [PATCH v3 5/6] dt-bindings: arm: qcom: Add oneplus-lemonade(p)
  • From: Nia Espera <nespera@xxxxxxxxxx>
• [PATCH v3 0/6] support oneplus-lemonade(p) devices
  • From: Nia Espera <nespera@xxxxxxxxxx>
• [PATCH v3 2/6] arm64: dts: qcom: sm8350: Fix DMA0 address
  • From: Nia Espera <nespera@xxxxxxxxxx>
• [PATCH v3 3/6] arm64: dts: qcom: pm8350k: Remove hanging whitespace
  • From: Nia Espera <nespera@xxxxxxxxxx>
• [PATCH v3 1/6] dt-bindings: iio: adc: add smb139x
  • From: Nia Espera <nespera@xxxxxxxxxx>
• [PATCH v3 4/6] arm64: dts: qcom: sm8350: Fix remoteproc interrupt type
  • From: Nia Espera <nespera@xxxxxxxxxx>
• RE: [PATCH 00/17] dt-bindings: samsung: add specific compatibles for existing SoC
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• Re: [PATCH 11/17] ASoC: dt-bindings: samsung-i2s: add specific compatibles for existing SoC
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 11/17] ASoC: dt-bindings: samsung-i2s: add specific compatibles for existing SoC
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: trivial-devices: add asair,ags02ma
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: trivial-devices: add asair,ags02ma
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: trivial-devices: add asair,ags02ma
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: trivial-devices: add asair,ags02ma
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: trivial-devices: add asair,ags02ma
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• Re: [PATCH 12/17] dt-bindings: pwm: samsung: add specific compatibles for existing SoC
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 17/17] arm64: dts: exynosautov9: add specific compatibles to several blocks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 15/17] arm64: dts: exynos7885: add specific compatibles to several blocks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 16/17] arm64: dts: exynos850: add specific compatibles to several blocks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 12/17] dt-bindings: pwm: samsung: add specific compatibles for existing SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 14/17] arm64: dts: exynos7: add specific compatibles to several blocks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 11/17] ASoC: dt-bindings: samsung-i2s: add specific compatibles for existing SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 13/17] arm64: dts: exynos5433: add specific compatibles to several blocks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 10/17] dt-bindings: iio: samsung,exynos-adc: add specific compatibles for existing SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 09/17] dt-bindings: gpu: arm,mali-midgard: add specific compatibles for existing Exynos SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 08/17] dt-bindings: samsung: exynos-pmu: add specific compatibles for existing SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 07/17] dt-bindings: serial: samsung: add specific compatibles for existing SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 06/17] dt-bindings: rtc: s3c-rtc: add specific compatibles for existing SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 04/17] dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatibles for existing SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 05/17] dt-bindings: pinctrl: samsung: add specific compatibles for existing SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 03/17] dt-bindings: i2c: samsung,s3c2410-i2c: add specific compatibles for existing SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 02/17] dt-bindings: i2c: exynos5: add specific compatibles for existing SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 01/17] dt-bindings: hwinfo: samsung,exynos-chipid: add specific compatibles for existing SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 00/17] dt-bindings: samsung: add specific compatibles for existing SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: vendor-prefixes: add asair
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] iio: imu: bmi323: Make the local structures static
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: vendor-prefixes: add asair
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• [PATCH AUTOSEL 6.1 01/11] iio: adc: stm32-adc: harden against NULL pointer deref in stm32_adc_probe()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.5 01/18] iio: adc: stm32-adc: harden against NULL pointer deref in stm32_adc_probe()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 01/18] iio: adc: stm32-adc: harden against NULL pointer deref in stm32_adc_probe()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH] iio: light: ltrf216a: Return floating point values
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: trivial-devices: add asair,ags02ma
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: vendor-prefixes: add asair
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/3] iio: chemical: add support for Asair AGS02MA
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• [PATCH 2/3] dt-bindings: trivial-devices: add asair,ags02ma
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• [PATCH 1/3] dt-bindings: vendor-prefixes: add asair
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• RE: [PATCH v2 2/2] iio: adc: adding support for pac193x
  • From: Robin Getz <rgetz@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: hmc425a: add entry for ADRF5740 Attenuator
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: iio: hmc425a: add entry for ADRF5740 Attenuator
  • From: Ana-Maria Cusco <anamaria.cuscoo@xxxxxxxxx>
• [PATCH v2 1/2] iio: amplifiers: hmc425a: add support for ADRF5740 Attenuator
  • From: Ana-Maria Cusco <anamaria.cuscoo@xxxxxxxxx>
• [PATCH v2 0/2] Add ADRF5740 driver
  • From: Ana-Maria Cusco <anamaria.cuscoo@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: adding support for pac193x
  • From: <Marius.Cristea@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: adding dt-bindings for PAC193X
  • From: <Marius.Cristea@xxxxxxxxxxxxx>
• Re: [alobakin:pfcp 5/20] drivers/iio/imu/adis16475.c:363 adis16475_set_freq() warn: set_bit() takes a bit number
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH] iio: imu: adis16475: use bit numbers in assign_bit()
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• Re: [alobakin:pfcp 5/20] drivers/iio/imu/adis16475.c:363 adis16475_set_freq() warn: set_bit() takes a bit number
  • From: Alexander Lobakin <aleksander.lobakin@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [alobakin:pfcp 5/20] drivers/iio/imu/adis16475.c:363 adis16475_set_freq() warn: set_bit() takes a bit number
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [alobakin:pfcp 5/20] drivers/iio/imu/adis16475.c:363 adis16475_set_freq() warn: set_bit() takes a bit number
  • From: Alexander Lobakin <aleksander.lobakin@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] Add ADRF5740 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: ad7192: Add AD7194 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: ad7192: Add AD7194 support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: ad7192: Use device api
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [alobakin:pfcp 5/20] drivers/iio/imu/adis16475.c:363 adis16475_set_freq() warn: set_bit() takes a bit number
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [alobakin:pfcp 5/20] drivers/iio/imu/adis16475.c:363 adis16475_set_freq() warn: set_bit() takes a bit number
  • From: Alexander Lobakin <aleksander.lobakin@xxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: ad7192: Use device api
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: adc: ad7192: Add AD7194 support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/3] iio: adc: ad7192: Add AD7194 support
  • From: alisadariana@xxxxxxxxx
• [PATCH 2/3] dt-bindings: iio: adc: ad7192: Add AD7194 support
  • From: alisadariana@xxxxxxxxx
• [PATCH 1/3] iio: adc: ad7192: Use device api
  • From: alisadariana@xxxxxxxxx
• [PATCH 0/3] iio: adc: ad7192: Add support for AD7194
  • From: alisadariana@xxxxxxxxx
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: hmc425a: add entry for ADRF5740
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC PATCH 1/8] iio: locking: introduce __cleanup() based direct mode claiming infrastructure
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: hmc425a: add entry for ADRF5740
  • From: Ana-Maria Cusco <anamaria.cuscoo@xxxxxxxxx>
• [PATCH 1/2] iio: amplifiers: adrf5740: Add Support ADRF5740 4-bit Attenuator
  • From: Ana-Maria Cusco <anamaria.cuscoo@xxxxxxxxx>
• [PATCH 0/2] Add ADRF5740 driver
  • From: Ana-Maria Cusco <anamaria.cuscoo@xxxxxxxxx>
• Re: [PATCH] iio: triggered-buffer: prevent possible freeing of wrong buffer
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• RE: [PATCH v2 2/2] iio: adc: adding support for pac193x
  • From: Robin Getz <rgetz@xxxxxxxxxxxxx>
• [PATCH] iio: imu: adis16475: add spi_device_id table
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/8] iio: locking: introduce __cleanup() based direct mode claiming infrastructure
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH] iio: triggered-buffer: prevent possible freeing of wrong buffer
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [RFC PATCH] iio: accel: st_accel: silent spi_device_id warnings
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v2] iio: imu: inv_mpu6050: fix an error code problem in inv_mpu6050_read_raw
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH] iio: triggered-buffer: prevent possible freeing of wrong buffer
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio: gts-helpers: Round gains and scales
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2] iio: sx9324: avoid copying property strings
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2] iio: imu: inv_mpu6050: fix an error code problem in inv_mpu6050_read_raw
  • From: Su Hui <suhui@xxxxxxxxxxxx>
• [PATCH] iio: imu: inv_mpu6050: return callee's error code rather than -EINVAL
  • From: Su Hui <suhui@xxxxxxxxxxxx>
• [PATCH v3] iio: imu: inv_mpu6050: fix an error code problem in inv_mpu6050_read_raw
  • From: Su Hui <suhui@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 0/2] Sanity-check available_scan_masks array
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH 1/8] iio: locking: introduce __cleanup() based direct mode claiming infrastructure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Sanity-check available_scan_masks array
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] IIO: hid-sensor-prox: add missing scale attribute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] drivers: misc: adi-axi-tdd: Add TDD engine
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: common: ms_sensors: ms_sensors_i2c: fix humidity conversion time table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: sx9324: avoid copying property strings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/3] iio: imu: adis: Use spi cs inactive delay
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio/imu: inv_icm42600: Use max() helper macros
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: light: Avago APDS9306
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v7,PATCH 1/2] dt-bindings: iio: Add MCP9600 thermocouple EMF converter
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/5] iio: pressure: bmp280: Allow multiple chips id per family of devices
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/5] iio: pressure: bmp280: Allow multiple chips id per family of devices
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2] iio: tmag5273: fix temperature offset
  • From: Javier Carrasco <javier.carrasco@xxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: sx9324: avoid copying property strings
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH v6 10/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH] iio: tmag5273: fix temperature offset
  • From: Javier Carrasco <javier.carrasco@xxxxxxxxxxxxxx>
• Re: [PATCH v2] iio/imu: inv_icm42600: Use max() helper macros
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: adding support for pac193x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: adding support for pac193x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: adding dt-bindings for PAC193X
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: iio: light: Avago APDS9306
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] iio: tmag5273: fix temperature offset
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 1/3] iio: imu: adis: Use spi cs inactive delay
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• [PATCH v3 3/3] dt-bindings: adis16460: Add 'spi-cs-inactive-delay-ns' property
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• [PATCH v3 0/3] iio: imu: adis: Use spi cs inactive delay
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: adis16475: Add 'spi-cs-inactive-delay-ns' property
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• Re: [PATCH][next] iio: imu: Fix spelling mistake "accelrometer" -> "accelerometer"
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: pressure: bmp085: Update links about sensor specifications
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: imu: inv_mpu6050: fix an error code problem in inv_mpu6050_read_raw
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: adis16460: Add 'spi-cs-inactive-delay-ns' property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/5] iio: pressure: bmp280: Add support for BMP390
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/5] iio: pressure: bmp280: Allow multiple chips id per family of devices
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/5] iio: pressure: bmp280: Allow multiple chips id per family of devices
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/5] iio: pressure: bmp280: Rearrange vars in reverse xmas tree order
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] phy: mapphone-mdm6600: fix an error code problem in inv_mpu6050_read_raw
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: kx022a: Fix acceleration value scaling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: correct file entry in BOSCH SENSORTEC BMI323 IMU IIO DRIVER
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] MAINTAINERS: correct file entry IIO LIGHT SENSOR GAIN-TIME_SCALE HELPERS
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 07/11] iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: adding support for pac193x
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 0/2] adding support for Microchip PAC193X Power Monitor
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: adding dt-bindings for PAC193X
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: light: Avago APDS9306
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2] iio/imu: inv_icm42600: Use max() helper macros
  • From: Bragatheswaran Manickavel <bragathemanick0908@xxxxxxxxx>
• Re: [PATCH] iio/imu: inv_icm42600: Use max() helper macros
  • From: Bragatheswaran Manickavel <bragathemanick0908@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: light: Avago APDS9306
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH] iio/imu: inv_icm42600: Use max() helper macros
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: adding support for pac193x
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: light: Avago APDS9306
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: light: Avago APDS9306
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] Support for Avago APDS9306 Ambient Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] iio: sx9324: replace deprecated strncpy
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• [PATCH v2] iio: sx9324: avoid copying property strings
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: adding dt-bindings for PAC193X
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH] iio: common: ms_sensors: ms_sensors_i2c: fix humidity conversion time table
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: adding dt-bindings for PAC193X
  • From: <Marius.Cristea@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: adding support for pac193x
  • From: <Marius.Cristea@xxxxxxxxxxxxx>
• [PATCH v1 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• [PATCH v1 1/2] dt-bindings: iio: light: Avago APDS9306
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• [PATCH v1 0/2] Support for Avago APDS9306 Ambient Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: correct file entry IIO LIGHT SENSOR GAIN-TIME_SCALE HELPERS
  • From: Amit Dhingra <mechanicalamit@xxxxxxxxx>
• [PATCH v3] MAINTAINERS: correct file entry IIO LIGHT SENSOR GAIN-TIME_SCALE HELPERS
  • From: Amit Dhingra <mechanicalamit@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: ti-adc128s052: Add lower resolution devices support
  • From: Sukrut Bellary <sukrut.bellary@xxxxxxxxx>
• [PATCH v2] MAINTAINERS: correct file entry IIO LIGHT SENSOR GAIN-TIME_SCALE HELPERS
  • From: Amit Dhingra <mechanicalamit@xxxxxxxxx>
• Re: [PATCH] MAINTAINERS: correct file entry IIO LIGHT SENSOR GAIN-TIME_SCALE HELPERS
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH] MAINTAINERS: correct file entry IIO LIGHT SENSOR GAIN-TIME_SCALE HELPERS
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH] MAINTAINERS: correct file entry IIO LIGHT SENSOR GAIN-TIME_SCALE HELPERS
  • From: Amit Dhingra <mechanicalamit@xxxxxxxxx>
• [v7,PATCH 1/2] dt-bindings: iio: Add MCP9600 thermocouple EMF converter
  • From: Andrew Hepp <andrew.hepp@xxxxxxxxx>
• [v7,PATCH 2/2] iio: temperature: Add MCP9600 thermocouple EMF converter
  • From: Andrew Hepp <andrew.hepp@xxxxxxxxx>
• Re: [PATCH] MAINTAINERS: correct file entry in BOSCH SENSORTEC BMI323 IMU IIO DRIVER
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: adding support for pac193x
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: adding dt-bindings for PAC193X
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: adding support for pac193x
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: ti-adc128s052: Add lower resolution devices support
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v2 2/2] iio: adc: adding support for pac193x
  • From: <marius.cristea@xxxxxxxxxxxxx>
• [PATCH v2 0/2] adding support for Microchip PAC193X Power Monitor
  • From: <marius.cristea@xxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: adc: adding dt-bindings for PAC193X
  • From: <marius.cristea@xxxxxxxxxxxxx>
• [PATCH] iio/imu: inv_icm42600: Use max() helper macros
  • From: Bragatheswaran Manickavel <bragathemanick0908@xxxxxxxxx>
• [PATCH] MAINTAINERS: correct file entry in BOSCH SENSORTEC BMI323 IMU IIO DRIVER
  • From: Lukas Bulwahn <lukas.bulwahn@xxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: adis16460: Add 'spi-cs-inactive-delay-ns' property
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [RFC PATCH 1/8] iio: locking: introduce __cleanup() based direct mode claiming infrastructure
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: ti-adc128s052: Add lower resolution devices support
  • From: Sukrut Bellary <sukrut.bellary@xxxxxxxxx>
• Re: [PATCH v6 10/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC PATCH 1/8] iio: locking: introduce __cleanup() based direct mode claiming infrastructure
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: adis16460: Add 'spi-cs-inactive-delay-ns' property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [RFC PATCH 1/8] iio: locking: introduce __cleanup() based direct mode claiming infrastructure
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: adis16460: Add 'spi-cs-inactive-delay-ns' property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: adis16460: Add 'spi-cs-inactive-delay-ns' property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: adis16475: Add 'spi-cs-inactive-delay-ns' property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: adis16460: Add 'spi-cs-inactive-delay-ns' property
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH 1/8] iio: locking: introduce __cleanup() based direct mode claiming infrastructure
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: adis16460: Add 'spi-cs-inactive-delay-ns' property
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 1/5] iio: pressure: bmp280: Use i2c_get_match_data()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: adis16460: Add 'spi-cs-inactive-delay-ns' property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [RFC PATCH 1/8] iio: locking: introduce __cleanup() based direct mode claiming infrastructure
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [RFC PATCH 1/8] iio: locking: introduce __cleanup() based direct mode claiming infrastructure
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 2/2] drivers: misc: adi-axi-tdd: Add TDD engine
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: adis16460: Add 'spi-cs-inactive-delay-ns' property
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 2/2] drivers: misc: adi-axi-tdd: Add TDD engine
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• [PATCH v2 2/3] dt-bindings: adis16475: Add 'spi-cs-inactive-delay-ns' property
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• [PATCH v2 3/3] dt-bindings: adis16460: Add 'spi-cs-inactive-delay-ns' property
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• [PATCH v2 0/3] iio: imu: adis: Use spi cs inactive delay
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• [PATCH v2 1/3] iio: imu: adis: Use spi cs inactive delay
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• Re: [PATCH v2 1/5] iio: pressure: bmp280: Use i2c_get_match_data()
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH v2 4/6] arm64: dts: qcom: sm8350: Fix remoteproc interrupt type
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2] iio: imu: inv_mpu6050: fix an error code problem in inv_mpu6050_read_raw
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH 3/3] dt-bindings: adis16460: Add 'spi-cs-inactive-delay-ns' property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: adis16475: Add 'spi-cs-inactive-delay-ns' property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/3] dt-bindings: adis16475: Add 'spi-cs-inactive-delay-ns' property
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• [PATCH 3/3] dt-bindings: adis16460: Add 'spi-cs-inactive-delay-ns' property
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• [PATCH 0/3] iio: imu: adis: Use spi cs inactive delay
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• [PATCH 1/3] iio: imu: adis: Use spi cs inactive delay
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• Re: [RFC PATCH 1/8] iio: locking: introduce __cleanup() based direct mode claiming infrastructure
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 4/5] iio: pressure: bmp280: Allow multiple chips id per family of devices
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] iio: pressure: bmp280: Use i2c_get_match_data()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH][next] iio: imu: Fix spelling mistake "accelrometer" -> "accelerometer"
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH 01/11] iio: adc: Update bindings for ADC7 name used on QCOM PMICs
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH 1/8] iio: locking: introduce __cleanup() based direct mode claiming infrastructure
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH] iio: tmag5273: fix temperature offset
  • From: Javier Carrasco <javier.carrasco@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/8] iio: locking: introduce __cleanup() based direct mode claiming infrastructure
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH 1/8] iio: locking: introduce __cleanup() based direct mode claiming infrastructure
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH][next] iio: imu: Fix spelling mistake "accelrometer" -> "accelerometer"
  • From: Colin Ian King <colin.i.king@xxxxxxxxx>
• Re: [PATCH 07/11] iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] dt-bindings: iio: pressure: bmp085: Update links about sensor specifications
  • From: Li peiyu <579lpy@xxxxxxxxx>
• Re: [PATCH 09/11] iio: adc: Update QCOM ADC drivers for bindings path change
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 11/11] dt-bindings: iio: remove QCOM ADC files from iio folder
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 10/11] ARM: dts: qcom: Update devicetree for QCOM ADC bindings path change
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 06/11] iio: adc: Add QCOM PMIC5 Gen3 ADC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 04/11] iio: adc: Update bindings to remove support for ADC7 name used on QCOM PMICs
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 03/11] ARM: dts: qcom: Update devicetree for ADC7 rename for QCOM PMICs
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] iio: kx022a: Fix acceleration value scaling
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 11/11] dt-bindings: iio: remove QCOM ADC files from iio folder
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH 10/11] ARM: dts: qcom: Update devicetree for QCOM ADC bindings path change
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH 08/11] dt-bindings: iio: adc: Copy QCOM ADC bindings files
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 10/11] ARM: dts: qcom: Update devicetree for QCOM ADC bindings path change
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH 09/11] iio: adc: Update QCOM ADC drivers for bindings path change
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH 08/11] dt-bindings: iio: adc: Copy QCOM ADC bindings files
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH 07/11] iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH 07/11] iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH 06/11] iio: adc: Add QCOM PMIC5 Gen3 ADC bindings
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH 06/11] iio: adc: Add QCOM PMIC5 Gen3 ADC bindings
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH 06/11] iio: adc: Add QCOM PMIC5 Gen3 ADC bindings
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH 05/11] iio: adc: qcom-spmi-adc5: remove support for ADC7 compatible string
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH 05/11] iio: adc: qcom-spmi-adc5: remove support for ADC7 compatible string
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH 04/11] iio: adc: Update bindings to remove support for ADC7 name used on QCOM PMICs
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH 04/11] iio: adc: Update bindings to remove support for ADC7 name used on QCOM PMICs
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH 03/11] ARM: dts: qcom: Update devicetree for ADC7 rename for QCOM PMICs
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH 01/11] iio: adc: Update bindings for ADC7 name used on QCOM PMICs
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH 01/11] iio: adc: Update bindings for ADC7 name used on QCOM PMICs
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [PATCH v2] iio: imu: inv_mpu6050: fix an error code problem in inv_mpu6050_read_raw
  • From: Su Hui <suhui@xxxxxxxxxxxx>
• Re: [PATCH 2/2] phy: mapphone-mdm6600: fix an error code problem in inv_mpu6050_read_raw
  • From: Su Hui <suhui@xxxxxxxxxxxx>
• Re: [PATCH 2/2] phy: mapphone-mdm6600: fix an error code problem in inv_mpu6050_read_raw
  • From: Su Hui <suhui@xxxxxxxxxxxx>
• Re: [RFC PATCH 1/8] iio: locking: introduce __cleanup() based direct mode claiming infrastructure
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 5/5] iio: pressure: bmp280: Add support for BMP390
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v2 4/5] iio: pressure: bmp280: Allow multiple chips id per family of devices
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v2 3/5] iio: pressure: bmp280: Rearrange vars in reverse xmas tree order
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v2 2/5] iio: pressure: bmp280: Use spi_get_device_match_data()
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v2 1/5] iio: pressure: bmp280: Use i2c_get_match_data()
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v2 0/5] Add support for BMP390 and various driver cleanups
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: ti-adc128s052: Add lower resolution devices support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 8/8] iio: proximity: sx9310: Use automated cleanup for locks and IIO mode claiming.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 7/8] iio: proximity: sx9324: Use automated cleanup for locks and IIO mode claiming.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 6/8] iio: proximity: sx9360: Use automated cleanup for locks and IIO mode claiming.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 5/8] iio: adc: max1363: Use automatic cleanup for locks and iio mode claiming.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 4/8] iio: imu: bmi323: Use cleanup handling for iio_device_claim_direct_mode()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 3/8] iio: accel: adxl367: Use automated cleanup for locks and iio direct mode.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 2/8] iio: dummy: Add use of new automated cleanup of locks and direct mode claiming.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 1/8] iio: locking: introduce __cleanup() based direct mode claiming infrastructure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 0/8] IIO: Use the new cleanup.h magic
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 2/2] iio: adc: ti-adc128s052: Add lower resolution devices support
  • From: Sukrut Bellary <sukrut.bellary@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: adc: ti,adc128s052: Add adc08c and adc10c family
  • From: Sukrut Bellary <sukrut.bellary@xxxxxxxxx>
• [PATCH v2 0/2] iio: adc: ti-adc128s052: Add support for adc102s021 and family
  • From: Sukrut Bellary <sukrut.bellary@xxxxxxxxx>
• Re: [PATCH v2 4/6] arm64: dts: qcom: sm8350: Fix remoteproc interrupt type
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH v2 4/6] arm64: dts: qcom: sm8350: Fix remoteproc interrupt type
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: qcm6490-fairphone-fp5: Add PM7325 thermals
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Sanity-check available_scan_masks array
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 0/2] Sanity-check available_scan_masks array
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: bmp280: fix eoc interrupt usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: kx022a: Fix acceleration value scaling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: bu27008: Add illuminance channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] 2nd set of IIO fixes for the 6.6 cycle (probably for 6.7 merge window given timing)
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: pressure: fix some word spelling errors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] mailmap: Change email mapping from previous employers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] IIO: 2nd set of new drivers, features and cleanup for 6.7
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] 2nd set of IIO fixes for the 6.6 cycle (probably for 6.7 merge window given timing)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] mailmap: Change email mapping from previous employers
  • From: Matt Ranostay <matt@xxxxxxxxxxx>
• [PATCH] iio: pressure: fix some word spelling errors
  • From: Li peiyu <579lpy@xxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: light: Squash APDS9300 and APDS9960 schemas
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: light: Squash APDS9300 and APDS9960 schemas
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: kx022a: Fix acceleration value scaling
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH 2/2] phy: mapphone-mdm6600: fix an error code problem in inv_mpu6050_read_raw
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 1/5] iio: magnetometer: ak8975: Convert enum->pointer for data in the match tables
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: light: Squash APDS9300 and APDS9960 schemas
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] iio: kx022a: Fix acceleration value scaling
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: qcm6490-fairphone-fp5: Add PM7325 thermals
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v2] iio: bu27008: Add illuminance channel
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH 2/2] phy: mapphone-mdm6600: fix an error code problem in inv_mpu6050_read_raw
  • From: Su Hui <suhui@xxxxxxxxxxxx>
• RE: [PATCH v2 1/5] iio: magnetometer: ak8975: Convert enum->pointer for data in the match tables
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: light: Squash APDS9300 and APDS9960 schemas
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [GIT PULL] First set of Counter updates for 6.7
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL] IIO: 1st set of new device support, features and cleanup for 6.7
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] iio: magnetometer: ak8975: Convert enum->pointer for data in the match tables
  • From: André Apitzsch <git@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH] iio: kx022a: Fix acceleration value scaling
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH v2] iio: bmp280: fix eoc interrupt usage
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH v2] iio: bmp280: fix eoc interrupt usage
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2] iio: bmp280: fix eoc interrupt usage
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: light: Squash APDS9300 and APDS9960 schemas
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] iio: kx022a: Fix acceleration value scaling
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 1/5] iio: magnetometer: ak8975: Convert enum->pointer for data in the match tables
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: light: Squash APDS9300 and APDS9960 schemas
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/6] device property: Add fwnode_property_match_property_string()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: light: Squash APDS9300 and APDS9960 schemas
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: light: Squash APDS9300 and APDS9960 schemas
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 1/5] iio: magnetometer: ak8975: Convert enum->pointer for data in the match tables
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: light: Squash APDS9300 and APDS9960 schemas
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH v5 2/3] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: light: Squash APDS9300 and APDS9960 schemas
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: light: Squash APDS9300 and APDS9960 schemas
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• RE: [PATCH v2 1/5] iio: magnetometer: ak8975: Convert enum->pointer for data in the match tables
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: light: Squash APDS9300 and APDS9960 schemas
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/5] iio: magnetometer: ak8975: Convert enum->pointer for data in the match tables
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: light: Squash APDS9300 and APDS9960 schemas
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: light: Squash APDS9300 and APDS9960 schemas
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH] dt-bindings: iio: light: Squash APDS9300 and APDS9960 schemas
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• RE: [PATCH v2 1/5] iio: magnetometer: ak8975: Convert enum->pointer for data in the match tables
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v2 1/5] iio: magnetometer: ak8975: Convert enum->pointer for data in the match tables
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v5 2/3] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 4/6] arm64: dts: qcom: sm8350: Fix remoteproc interrupt type
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [GIT PULL] First set of Counter updates for 6.7
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• Re: [PATCH 2/4] arm64: dts: qcom: qcm6490-fairphone-fp5: Add PM7250B thermals
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/5] iio: magnetometer: ak8975: Convert enum->pointer for data in the match tables
  • From: André Apitzsch <git@xxxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: qcm6490-fairphone-fp5: Add PM7325 thermals
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 4/6] arm64: dts: qcom: sm8350: Fix remoteproc interrupt type
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH v2 4/6] arm64: dts: qcom: sm8350: Fix remoteproc interrupt type
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/5] iio: magnetometer: ak8975: Convert enum->pointer for data in the match tables
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] iio: magnetometer: ak8975: Convert enum->pointer for data in the match tables
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/6] device property: Add fwnode_property_match_property_string()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/3] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: resolver: ad2s1210: add reset gpio support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: resolver: ad2s1210: add support for adi,fixed-mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: bmp280: fix eoc interrupt usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: bmp280: fix eoc interrupt usage
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 0/2] Add maxim max34408/34409 ADC driver and yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: bmp280: fix eoc interrupt usage
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] arm64: dts: qcom: sm8350-lemonade(p): new devices
  • From: Nia Espera <nespera@xxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH] iio: bmp280: fix eoc interrupt usage
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] arm64: dts: qcom: sm8350-lemonade(p): new devices
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 0/6] support oneplus-lemonade(p) devices
  • From: Nia Espera <nespera@xxxxxxxxxx>
• [PATCH v2 6/6] arm64: dts: qcom: sm8350-lemonade(p): new devices
  • From: Nia Espera <nespera@xxxxxxxxxx>
• Re: [PATCH v2 1/6] iio: adc: add smb139x bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 5/6] dt-bindings: arm: qcom: add oneplus-lemonade(p) bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 1/6] iio: adc: add smb139x bindings
  • From: Nia Espera <nespera@xxxxxxxxxx>
• Re: [PATCH v2 6/6] arm64: dts: qcom: sm8350-lemonade(p): new devices
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 4/6] arm64: dts: qcom: sm8350: Fix remoteproc interrupt type
  • From: Nia Espera <nespera@xxxxxxxxxx>
• [PATCH v2 2/6] arm64: dts: qcom: sm8350: Fix DMA0 address
  • From: Nia Espera <nespera@xxxxxxxxxx>
• [PATCH v2 3/6] arm64: dts: qcom: pm8350k: remove hanging whitespace
  • From: Nia Espera <nespera@xxxxxxxxxx>
• [PATCH v2 5/6] dt-bindings: arm: qcom: add oneplus-lemonade(p) bindings
  • From: Nia Espera <nespera@xxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: sm8350-lemonade(p): new devices
  • From: Nia Espera <nespera@xxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: sm8350-lemonade(p): new devices
  • From: Nia Espera <nespera@xxxxxxxxxx>
• Re: [PATCH v2 1/5] iio: magnetometer: ak8975: Convert enum->pointer for data in the match tables
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] IIO: hid-sensor-prox: add missing scale attribute
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] iio: magnetometer: ak8975: Convert enum->pointer for data in the match tables
  • From: André Apitzsch <git@xxxxxxxxxxx>
• Re: [PATCH v1 2/6] device property: Add fwnode_property_match_property_string()
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v5 2/3] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH v1 2/6] device property: Add fwnode_property_match_property_string()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] iio: adc: add smb139x bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] iio: afe: rescale: Accept only offset channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] IIO: 1st set of new device support, features and cleanup for 6.7
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1] iio: adc: aspeed: Support deglitch feature.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/6] device property: Use fwnode_property_string_array_count()
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH] IIO: hid-sensor-prox: add missing scale attribute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: sm8350-lemonade(p): new devices
  • From: Nia Espera <nespera@xxxxxxxxxx>
• Re: [PATCH 2/5] arm64: dts: qcom: sm8350: Fix DMA0 address
  • From: Nia Espera <nespera@xxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: sm8350-lemonade(p): new devices
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: sm8350-lemonade(p): new devices
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: sm8350-lemonade(p): new devices
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/5] arm64: dts: qcom: pm8350k: remove hanging whitespace
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/5] arm64: dts: qcom: sm8350: Fix DMA0 address
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2] iio: afe: rescale: Accept only offset channels
  • From: Peter Rosin <peda@xxxxxxxxxx>
• RE: [PATCH] iio: resolver: ad2s1210: add reset gpio support
  • From: "Hennerich, Michael" <Michael.Hennerich@xxxxxxxxxx>
• Re: [PATCH v2] iio: afe: rescale: Accept only offset channels
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2] iio: resolver: ad2s1210: add support for adi,fixed-mode
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: sm8350-lemonade(p): new devices
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: sm8350-lemonade(p): new devices
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: sm8350-lemonade(p): new devices
  • From: Nia Espera <nespera@xxxxxxxxxx>
• [PATCH] iio: resolver: ad2s1210: add reset gpio support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: sm8350-lemonade(p): new devices
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] IIO: hid-sensor-prox: add missing scale attribute
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v2] iio: resolver: ad2s1210: add support for adi,fixed-mode
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 1/5] iio: adc: add smb139x bindings
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: sm8350-lemonade(p): new devices
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: sm8350-lemonade(p): new devices
  • From: Nia Espera <nespera@xxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: sm8350-lemonade(p): new devices
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH v2] iio: afe: rescale: Accept only offset channels
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 5/5] arm64: dts: qcom: sm8350-lemonade(p): new devices
  • From: Nia Espera <nespera@xxxxxxxxxx>
• [PATCH 4/5] arm64: dts: qcom: sm8350: Fix remoteproc interrupt type
  • From: Nia Espera <nespera@xxxxxxxxxx>
• [PATCH 3/5] arm64: dts: qcom: pm8350k: remove hanging whitespace
  • From: Nia Espera <nespera@xxxxxxxxxx>
• [PATCH 1/5] iio: adc: add smb139x bindings
  • From: Nia Espera <nespera@xxxxxxxxxx>
• [PATCH 2/5] arm64: dts: qcom: sm8350: Fix DMA0 address
  • From: Nia Espera <nespera@xxxxxxxxxx>
• [PATCH 0/5] support oneplus-lemonade(p) devices
  • From: Nia Espera <nespera@xxxxxxxxxx>
• Re: [PATCH v6 10/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v2 2/2] iio: buffer: document known issue
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 1/2] iio: sanity check available_scan_masks array
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 0/2] Sanity-check available_scan_masks array
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2] iio: afe: rescale: Accept only offset channels
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] iio: sanity check available_scan_masks array
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2] iio: afe: rescale: Accept only offset channels
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/5] iio: pressure: bmp280: Rearrange vars in reverse xmas tree order
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/5] iio: pressure: bmp280: Allow multiple chips id per family of devices
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ads7038: Add driver support for 12bit ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/5] Add support for BMP390 and various driver cleanups
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] iio: pressure: bmp280: Allow multiple chips id per family of devices
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] IIO: hid-sensor-prox: add missing scale attribute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: adc: ti,ads7038: Add description for ADS7038
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: adc: ti,ads7038: Add description for ADS7038
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: adc: ti,ads7038: Add description for ADS7038
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] iio: resolver: ad2s1210: add support for adi,fixed-mode
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: adc: ti,ads7038: Add description for ADS7038
  • From: werneazc@xxxxxxxxx
• Re: [PATCH v3 1/2] dt-bindings: iio: adc: ti,ads7038: Add description for ADS7038
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 2/2] iio: adc: ads7038: Add driver support for 12bit ADC
  • From: werneazc@xxxxxxxxx
• [PATCH v3 1/2] dt-bindings: iio: adc: ti,ads7038: Add description for ADS7038
  • From: werneazc@xxxxxxxxx
• [PATCH 5/5] iio: pressure: bmp280: Add support for BMP390
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH 4/5] iio: pressure: bmp280: Allow multiple chips id per family of devices
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH 3/5] iio: pressure: bmp280: Rearrange vars in reverse xmas tree order
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH 2/5] iio: pressure: bmp280: Use spi_get_device_match_data()
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH 1/5] iio: pressure: bmp280: Use i2c_get_match_data()
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH 0/5] Add support for BMP390 and various driver cleanups
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH] IIO: hid-sensor-prox: add missing scale attribute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>