On Sat, Mar 23, 2024 at 4:53 PM David Lechner <dlechner@xxxxxxxxxxxx> wrote:
>
> On Fri, Mar 22, 2024 at 5:06 PM Marcelo Schmitt
> <marcelo.schmitt@xxxxxxxxxx> wrote:
> >
...
> > +
> > + vref_reg = devm_regulator_get(&spi->dev, "vref");
>
> This should to be devm_regulator_get_optional(), otherwise it can
> return a "dummy" regulator if one is missing in the devicetree which
> will fail when getting the voltage.
>
> > + if (IS_ERR(vref_reg))
> > + return dev_err_probe(&spi->dev, PTR_ERR(vref_reg),
> > + "Failed to get vref regulator\n");
> > +
> > + ret = regulator_enable(vref_reg);
> > + if (ret < 0)
> > + return dev_err_probe(&spi->dev, ret,
> > + "Failed to enable voltage regulator\n");
> > +
> > + ret = devm_add_action_or_reset(&spi->dev, ad4000_regulator_disable, vref_reg);
> > + if (ret)
> > + return dev_err_probe(&spi->dev, ret,
> > + "Failed to add regulator disable action\n");
> > +
> > + st->vref = regulator_get_voltage(vref_reg);
> > + if (st->vref < 0)
> > + return dev_err_probe(&spi->dev, st->vref, "Failed to get vref\n");
> > +
> > + if (!device_property_present(&spi->dev, "adi,spi-cs-mode")) {
> > + st->cnv_gpio = devm_gpiod_get(&spi->dev, "cnv", GPIOD_OUT_HIGH);
> > + if (IS_ERR(st->cnv_gpio)) {
> > + if (PTR_ERR(st->cnv_gpio) == -EPROBE_DEFER)
> > + return -EPROBE_DEFER;
> > +
> > + return dev_err_probe(&spi->dev, PTR_ERR(st->cnv_gpio),
> > + "Failed to get CNV GPIO");
> > + }
> > + }
>
In a review for a different patch, Jonathan said he would prefer
devm_regulator_get() and failing in regulator_get_voltage() rather
than using devm_regulator_get_optional() so I think the same would
apply here and my suggestion should be overruled.
