On Wed, Mar 13, 2024 at 06:40:06PM +0100, Vasileios Amoiridis wrote:
> The scan mask for the BME280 supports humidity measurement needs
> to be distinguished from the rest in order for the timestamp to
> be able to work. Scan masks are added for different combinations
> of measurements. The temperature measurement is always needed for
> pressure and humidity measurements.
(Just to make sure if you used --histogram diff algo when preparing the series)
...
> {
> - .type = IIO_HUMIDITYRELATIVE,
> + .type = IIO_PRESSURE,
> .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
> BIT(IIO_CHAN_INFO_RAW) |
> BIT(IIO_CHAN_INFO_SCALE) |
> BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> - .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) |
Stray change
> BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
> + .scan_index = 1,
> + .scan_type = {
> + .sign = 'u',
> + .realbits = 32,
> + .storagebits = 32,
> + .endianness = IIO_CPU,
> + },
> },
--
With Best Regards,
Andy Shevchenko
