On 3/16/24 09:36, Jonathan Cameron wrote: > On Fri, 15 Mar 2024 13:47:40 -0400 > Sean Anderson <sean.anderson@xxxxxxxxx> wrote: > >> Hi Conall, >> >> On 3/15/24 09:18, O'Griofa, Conall wrote: >> > [AMD Official Use Only - General] >> > >> > Hi, >> > >> > I think there was a fix for this issue applied to the version that was running on 5.15 that didn't seem to make it into the upstream driver. >> > Please see link for reference https://github.com/Xilinx/linux-xlnx/commit/608426961f16ab149b1b699f1c35f7ad244c0720 >> > >> > I think a similar fix to the above patch is may be beneficial? >> >> These patches look functionally identical to me. > > Because there are no channels with scan index between > 22 * 2 + 16 (that patch) and 22 * 3 (your patch) that is > the effect is indeed the same. But given the issues is the > 64 limit on maximum scan index, 22 * 3 = 66 is an ugly value > to compare with. > > I'm still very against the use of scan_index for anything other > than scan indices (which is why partly how this bug wasn't noticed > in the first palce). So the check should be scan_index != -1 > and uses of those values elsewhere in the driver should be fixed > (which looks simple to do from a quick glance at the code). OK, so how do the sysfs files get named then? --Sean >> >> --Sean >> >> >> -----Original Message----- >> >> From: Sean Anderson <sean.anderson@xxxxxxxxx> >> >> Sent: Thursday, March 14, 2024 5:30 PM >> >> To: Jonathan Cameron <jic23@xxxxxxxxxx> >> >> Cc: linux-iio@xxxxxxxxxxxxxxx; O'Griofa, Conall <conall.ogriofa@xxxxxxx>; >> >> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Lars-Peter >> >> Clausen <lars@xxxxxxxxxx> >> >> Subject: Re: [PATCH] iio: xilinx-ams: Don't include ams_ctrl_channels in >> >> scan_mask >> >> >> >> Caution: This message originated from an External Source. Use proper caution >> >> when opening attachments, clicking links, or responding. >> >> >> >> >> >> On 3/14/24 11:48, Jonathan Cameron wrote: >> >> > On Mon, 11 Mar 2024 12:28:00 -0400 >> >> > Sean Anderson <sean.anderson@xxxxxxxxx> wrote: >> >> > >> >> >> ams_enable_channel_sequence constructs a "scan_mask" for all the PS >> >> >> and PL channels. This works out fine, since scan_index for these >> >> >> channels is less than 64. However, it also includes the >> >> >> ams_ctrl_channels, where scan_index is greater than 64, triggering >> >> >> undefined behavior. Since we don't need these channels anyway, just >> >> exclude them. >> >> >> >> >> >> Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver") >> >> >> Signed-off-by: Sean Anderson <sean.anderson@xxxxxxxxx> >> >> > >> >> > Hi Sean, >> >> > >> >> > I'd ideally like to understand why we have channels with such large >> >> > scan indexes. Those values should only be used for buffered capture. >> >> > It feels like they are being abused here. Can we set them to -1 >> >> > instead and check based on that? >> >> > For a channel, a scan index of -1 means it can't be captured via the >> >> > buffered interfaces but only accessed via sysfs reads. >> >> > I think that's what we have here? >> >> >> >> From what I can tell, none of the channels support buffered reads. And we can't >> >> naïvely convert the scan_index to -1, since that causes sysfs naming conflicts >> >> (not to mention the compatibility break). >> >> >> >> > >> >> > I just feel like if we leave these as things stand, we will get bitten >> >> > by similar bugs in the future. At least with -1 it should be obvious why! >> >> >> >> There are just as likely to be bugs confusing the PL/PS subdevices... >> >> >> >> FWIW I had no trouble identifying the channels involved with this bug. >> >> >> >> --Sean >> >> >> >> > Jonathan >> >> > >> >> > >> >> >> --- >> >> >> >> >> >> drivers/iio/adc/xilinx-ams.c | 8 ++++++-- >> >> >> 1 file changed, 6 insertions(+), 2 deletions(-) >> >> >> >> >> >> diff --git a/drivers/iio/adc/xilinx-ams.c >> >> >> b/drivers/iio/adc/xilinx-ams.c index a55396c1f8b2..4de7ce598e4d >> >> >> 100644 >> >> >> --- a/drivers/iio/adc/xilinx-ams.c >> >> >> +++ b/drivers/iio/adc/xilinx-ams.c >> >> >> @@ -414,8 +414,12 @@ static void ams_enable_channel_sequence(struct >> >> >> iio_dev *indio_dev) >> >> >> >> >> >> /* Run calibration of PS & PL as part of the sequence */ >> >> >> scan_mask = BIT(0) | BIT(AMS_PS_SEQ_MAX); >> >> >> - for (i = 0; i < indio_dev->num_channels; i++) >> >> >> - scan_mask |= BIT_ULL(indio_dev->channels[i].scan_index); >> >> >> + for (i = 0; i < indio_dev->num_channels; i++) { >> >> >> + const struct iio_chan_spec *chan = >> >> >> + &indio_dev->channels[i]; >> >> >> + >> >> >> + if (chan->scan_index < AMS_CTRL_SEQ_BASE) >> >> >> + scan_mask |= BIT_ULL(chan->scan_index); >> >> >> + } >> >> >> >> >> >> if (ams->ps_base) { >> >> >> /* put sysmon in a soft reset to change the sequence */ >> >> > >> >
