In the probe function group bus configuration and the
indio_dev initialization to improve readability. Add a
comment to the probe function to explain function arguments.
Signed-off-by: Lothar Rubusch <l.rubusch@xxxxxxxxx>
---
drivers/iio/accel/adxl345_core.c | 23 +++++++++++++++++------
1 file changed, 17 insertions(+), 6 deletions(-)
diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
index e3718d0dd..662628cdf 100644
--- a/drivers/iio/accel/adxl345_core.c
+++ b/drivers/iio/accel/adxl345_core.c
@@ -209,6 +209,16 @@ static void adxl345_powerdown(void *regmap)
regmap_write(regmap, ADXL345_REG_POWER_CTL, ADXL345_POWER_CTL_STANDBY);
}
+/**
+ * adxl345_core_probe() - probe and setup for the adxl345 accelerometer,
+ * also covers the adlx375 accelerometer
+ * @dev: Driver model representation of the device
+ * @regmap: Regmap instance for the device
+ * @setup: Setup routine to be executed right before the standard device
+ * setup, can also be set to NULL if not required
+ *
+ * Return: 0 on success, negative errno on error
+ */
int adxl345_core_probe(struct device *dev, struct regmap *regmap,
int (*setup)(struct device*, struct regmap*))
{
@@ -238,22 +248,23 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
data = iio_priv(indio_dev);
data->regmap = regmap;
- /* Enable full-resolution mode */
+
data->info = device_get_match_data(dev);
if (!data->info)
return -ENODEV;
- ret = regmap_update_bits(regmap, ADXL345_REG_DATA_FORMAT,
- ADXL345_DATA_FORMAT_MSK, ADXL345_DATA_FORMAT_FULL_RES);
- if (ret)
- return dev_err_probe(dev, ret, "Failed to set data range\n");
-
indio_dev->name = data->info->name;
indio_dev->info = &adxl345_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = adxl345_channels;
indio_dev->num_channels = ARRAY_SIZE(adxl345_channels);
+ /* Enable full-resolution mode */
+ ret = regmap_update_bits(regmap, ADXL345_REG_DATA_FORMAT,
+ ADXL345_DATA_FORMAT_MSK, ADXL345_DATA_FORMAT_FULL_RES);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to set data range\n");
+
/* Enable measurement mode */
ret = adxl345_powerup(data->regmap);
if (ret < 0)
--
2.25.1
