Add a setup function implementation to the spi module to enable
spi-3wire as option when specified in the device-tree.
Signed-off-by: Lothar Rubusch <l.rubusch@xxxxxxxxx>
---
drivers/iio/accel/adxl345.h | 3 +++
drivers/iio/accel/adxl345_spi.c | 12 +++++++++++-
2 files changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/accel/adxl345.h b/drivers/iio/accel/adxl345.h
index 3c1ded0c2..6b84a2cee 100644
--- a/drivers/iio/accel/adxl345.h
+++ b/drivers/iio/accel/adxl345.h
@@ -8,6 +8,9 @@
#ifndef _ADXL345_H_
#define _ADXL345_H_
+#define ADXL345_REG_DATA_FORMAT 0x31
+#define ADXL345_DATA_FORMAT_SPI BIT(6) /* spi-3wire */
+
/*
* In full-resolution mode, scale factor is maintained at ~4 mg/LSB
* in all g ranges.
diff --git a/drivers/iio/accel/adxl345_spi.c b/drivers/iio/accel/adxl345_spi.c
index 1c0513bd3..1094396ac 100644
--- a/drivers/iio/accel/adxl345_spi.c
+++ b/drivers/iio/accel/adxl345_spi.c
@@ -20,6 +20,16 @@ static const struct regmap_config adxl345_spi_regmap_config = {
.read_flag_mask = BIT(7) | BIT(6),
};
+static int adxl345_spi_setup(struct device *dev, struct regmap *regmap)
+{
+ struct spi_device *spi = container_of(dev, struct spi_device, dev);
+
+ if (spi->mode & SPI_3WIRE)
+ return regmap_write(regmap, ADXL345_REG_DATA_FORMAT,
+ ADXL345_DATA_FORMAT_SPI);
+ return 0;
+}
+
static int adxl345_spi_probe(struct spi_device *spi)
{
struct regmap *regmap;
@@ -33,7 +43,7 @@ static int adxl345_spi_probe(struct spi_device *spi)
if (IS_ERR(regmap))
return dev_err_probe(&spi->dev, PTR_ERR(regmap), "Error initializing regmap\n");
- return adxl345_core_probe(&spi->dev, regmap, NULL);
+ return adxl345_core_probe(&spi->dev, regmap, &adxl345_spi_setup);
}
static const struct adxl345_chip_info adxl345_spi_info = {
--
2.25.1
