Linux IIO Development

• Thread Index

• Re: [PATCH 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH 3/4] iio: light: stk3310: log error if reading the chip id fails
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 1/1] iio: light: stk3310: Drop most likely fake ACPI ID
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] iio: light: stk3310: Implement vdd supply and power it off during suspend
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 4/5] dt-bindings: iio: adc: ad7192: Add AD7194 support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 07/10] dt-bindings: iio: dac: add docs for AD9739A
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v5 5/5] iio: adc: ad7192: Add AD7194 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 4/5] dt-bindings: iio: adc: ad7192: Add AD7194 support
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• Re: [PATCH 2/4] iio: ABI: add ABI file for the LTC2664 DAC
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 11/11] iio: dac: support the ad9739a RF DAC
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 07/10] dt-bindings: iio: dac: add docs for AD9739A
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v3 0/4] iio: pressure: dps310: support negative temperature values
  • From: Thomas Haemmerle <thomas.haemmerle@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/4] iio: pressure: dps310: introduce consistent error handling
  • From: Thomas Haemmerle <thomas.haemmerle@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 4/4] iio: pressure: dps310: simplify scale factor reading
  • From: Thomas Haemmerle <thomas.haemmerle@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 3/4] iio: pressure: dps310: consistently check return value of `regmap_read`
  • From: Thomas Haemmerle <thomas.haemmerle@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/4] iio: pressure: dps310: support negative temperature values
  • From: Thomas Haemmerle <thomas.haemmerle@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/8] iio: adc: ab8500-gpadc: Allow COMPILE_TEST builds
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 1/6] iio: pressure: bmp280: Various driver cleanups
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v5 4/5] dt-bindings: iio: adc: ad7192: Add AD7194 support
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• Re: [PATCH v5 5/5] iio: adc: ad7192: Add AD7194 support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v5 3/5] iio: adc: ad7192: Add aincom supply
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v5 5/5] iio: adc: ad7192: Add AD7194 support
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: light: stk33xx: add regulator for vdd supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 1/6] iio: pressure: bmp280: Various driver cleanups
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: Add AD4000
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH 4/4] arm64: dts: allwinner: pinephone: Add power supply to stk3311
  • From: Aren Moynihan <aren@xxxxxxxxxxxxxxxxx>
• [PATCH 3/4] iio: light: stk3310: log error if reading the chip id fails
  • From: Aren Moynihan <aren@xxxxxxxxxxxxxxxxx>
• [PATCH 2/4] iio: light: stk3310: Implement vdd supply and power it off during suspend
  • From: Aren Moynihan <aren@xxxxxxxxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: iio: light: stk33xx: add regulator for vdd supply
  • From: Aren Moynihan <aren@xxxxxxxxxxxxxxxxx>
• [PATCH 0/4] iio: light: stk3310: support powering off during suspend
  • From: Aren Moynihan <aren@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/6] iio: pressure: bmp280: Various driver cleanups
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v5 3/5] iio: adc: ad7192: Add aincom supply
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• Re: [PATCH v5 4/5] dt-bindings: iio: adc: ad7192: Add AD7194 support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: ABI: add ABI file for the LTC2664 DAC
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v5 1/5] iio: adc: ad7192: Use standard attribute
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v5 5/5] iio: adc: ad7192: Add AD7194 support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v5 4/5] dt-bindings: iio: adc: ad7192: Add AD7194 support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v5 3/5] iio: adc: ad7192: Add aincom supply
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v5 2/5] dt-bindings: iio: adc: ad7192: Add aincom supply
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: Add AD4000
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v5 5/5] iio: adc: ad7192: Add AD7194 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/5] iio: adc: ad7192: Add aincom supply
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: dac: ad5755: make use of of_device_id table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: dac: Add adi,ltc2664.yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 6/6] iio: pressure: bmp280: Add triggered buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/6] iio: pressure: bmp280: Introduce new cleanup routines
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/6] iio: pressure: bmp280: Refactorize reading functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/6] iio: pressure: bmp280: Various driver cleanups
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add support for AD4000
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add support for AD4000
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: dac: Add adi,ltc2664.yaml
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add support for AD4000
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: Add AD4000
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Add support for AD4000 series
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1] iio: adc: ad_sigma_delta: Clear pending interrupts before enable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: dac: ltc2664: Add driver for LTC2664 and LTC2672
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3] iio: dac: ad5755: make use of of_device_id table
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: ABI: add ABI file for the LTC2672 DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: ABI: add ABI file for the LTC2664 DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v5 5/5] iio: adc: ad7192: Add AD7194 support
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v5 4/5] dt-bindings: iio: adc: ad7192: Add AD7194 support
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v5 3/5] iio: adc: ad7192: Add aincom supply
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v5 2/5] dt-bindings: iio: adc: ad7192: Add aincom supply
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v5 1/5] iio: adc: ad7192: Use standard attribute
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v5 0/5] iio: adc: ad7192: Add AD7194 support
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: dac: Add adi,ltc2664.yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: dac: Add adi,ltc2664.yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: dac: Add adi,ltc2664.yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/2] iio: imu: inv_icm42600: add support of ICM-42688-P
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7944: Consolidate spi_sync() wrapper
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: imu: mpu6050: Improve i2c-gate disallow list
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 11/11] iio: dac: support the ad9739a RF DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/6] iio: adc: ad7173: fix buffers enablement for ad7176-2
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [GIT PULL] Counter updates for 6.10
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/8] iio: adc: ab8500-gpadc: Allow COMPILE_TEST builds
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 4/8] iio: adc: stm32: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 3/8] iio: adc: stm32: Fixing err code to not indicate success
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/8] iio: adc: qcom-spmi-adc5: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: pressure: dps310: introduce consistent error handling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/4] iio: pressure: dps310: support negative temperature values
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [GIT PULL] Counter updates for 6.9
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• [GIT PULL] Counter updates for 6.10
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• Re: [PATCH v3 07/10] dt-bindings: iio: dac: add docs for AD9739A
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH] iio: adc: ad7944: Consolidate spi_sync() wrapper
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 2/4] iio: ABI: add ABI file for the LTC2664 DAC
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: dac: Add adi,ltc2664.yaml
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 09/10] iio: dac: add support for AXI DAC IP core
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v3 10/10] iio: dac: support the ad9739a RF DAC
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v3 06/10] dt-bindings: iio: dac: add docs for AXI DAC IP
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v3 07/10] dt-bindings: iio: dac: add docs for AD9739A
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v3 04/10] iio: buffer-dmaengine: Support specifying buffer direction
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v3 08/10] iio: backend: add new functionality
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v3 02/10] iio: buffer-dma: Rename iio_dma_buffer_data_available()
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v3 03/10] iio: buffer-dma: Enable buffer write support
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v3 05/10] iio: buffer-dmaengine: Enable write support
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v3 00/10] iio: dac: support IIO backends on the output direction
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v3 01/10] iio: buffer-dma: add iio_dmaengine_buffer_setup()
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• Re: [PATCH v6 3/8] iio: adc: stm32: Fixing err code to not indicate success
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: dac: Add adi,ltc2664.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 4/4] iio: dac: ltc2664: Add driver for LTC2664 and LTC2672
  • From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
• [PATCH 3/4] iio: ABI: add ABI file for the LTC2672 DAC
  • From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
• [PATCH 2/4] iio: ABI: add ABI file for the LTC2664 DAC
  • From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
• [PATCH 1/4] dt-bindings: iio: dac: Add adi,ltc2664.yaml
  • From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
• [PATCH 0/4] Add driver for LTC2664 and LTC2672
  • From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
• Re: [GIT PULL] Counter updates for 6.9
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: Fix the sorting functionality in iio_gts_build_avail_time_table
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 2/4] iio: pressure: dps310: introduce consistent error handling
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v9 00/13] Introduce STM32 Firewall framework
  • From: Alexandre TORGUE <alexandre.torgue@xxxxxxxxxxx>
• Re: [PATCH] iio: industrialio-core: look for aliases to request device index
  • From: Dominique Martinet <dominique.martinet@xxxxxxxxxxxxxxxxx>
• [Bug 218578] MXC6655 accelerometer not working with MXC4005 driver
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 218578] MXC6655 accelerometer not working with MXC4005 driver
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v2 07/11] dt-bindings: iio: dac: add docs for AD9739A
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 06/11] dt-bindings: iio: dac: add docs for AXI DAC IP
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 4/4] iio: pressure: dps310: simplify scale factor reading
  • From: Thomas Haemmerle <thomas.haemmerle@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/4] iio: pressure: dps310: support negative temperature values
  • From: Thomas Haemmerle <thomas.haemmerle@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/4] iio: pressure: dps310: introduce consistent error handling
  • From: Thomas Haemmerle <thomas.haemmerle@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 3/4] iio: pressure: dps310: consistently check return value of `regmap_read`
  • From: Thomas Haemmerle <thomas.haemmerle@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/4] iio: pressure: dps310: support negative temperature values
  • From: Thomas Haemmerle <thomas.haemmerle@xxxxxxxxxxxxxxxxxxxx>
• Re: (subset) [PATCH 00/34] address all -Wunused-const warnings
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] riscv: dts: thead: Add XuanTie TH1520 ADC device node
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add support for AD4000
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v9 00/13] Introduce STM32 Firewall framework
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add support for AD4000
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 0/2] Add support for AD4000 series
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add support for AD4000
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: Add AD4000
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v2 0/2] Add support for AD4000 series
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: imu: mpu6050: Improve i2c-gate disallow list
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add support for AD4000
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: Add AD4000
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 0/2] Add support for AD4000 series
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: imu: mpu6050: Improve i2c-gate disallow list
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH v4 0/6] Driver cleanup and series to add triggered buffer
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH 2/6] iio: adc: ad7173: fix buffers enablement for ad7176-2
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• [PATCH] dt-bindings: iio: imu: mpu6050: Improve i2c-gate disallow list
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH v4 0/6] Driver cleanup and series to add triggered buffer
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/2] iio: adc: Add support for AD4000
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: adc: Add AD4000
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v2 0/2] Add support for AD4000 series
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [Bug 218578] MXC6655 accelerometer not working with MXC4005 driver
  • From: bugzilla-daemon@xxxxxxxxxx
• [PATCH v3 1/2] dt-bindings: iio: imu: add icm42688 inside inv_icm42600
  • From: inv.git-commit@xxxxxxx
• [PATCH v3 2/2] iio: imu: inv_icm42600: add support of ICM-42688-P
  • From: inv.git-commit@xxxxxxx
• Re: [PATCH v3 1/2] dt-bindings: iio: imu: add icm42688 inside inv_icm42600
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 0/2] iio: imu: inv_icm42600: add support of ICM-42688-P
  • From: inv.git-commit@xxxxxxx
• Re: [PATCH 1/8] iio: adc: ab8500-gpadc: Allow COMPILE_TEST builds
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: backend: make use of dev_errp_probe()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 3/4] iio: backend: make use of dev_errp_probe()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 1/4] dev_printk: add new dev_errp_probe() helper
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 11/11] iio: dac: support the ad9739a RF DAC
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v9 00/13] Introduce STM32 Firewall framework
  • From: Alexandre TORGUE <alexandre.torgue@xxxxxxxxxxx>
• Re: [PATCH v2 03/11] iio: buffer-dma: Enable buffer write support
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 09/11] iio: backend: add new functionality
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v1] iio: adc: ad_sigma_delta: Clear pending interrupts before enable
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v4 0/6] Driver cleanup and series to add triggered buffer
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v4 6/6] iio: pressure: bmp280: Add triggered buffer support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v4 5/6] iio: pressure: bmp280: Add SCALE, RAW values in channels and refactorize them
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v4 4/6] iio: pressure: bmp280: Generalize read_{temp,press,humid}() functions
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v4 3/6] iio: pressure: bmp280: Introduce new cleanup routines
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v4 2/6] iio: pressure: bmp280: Refactorize reading functions
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v4 1/6] iio: pressure: bmp280: Various driver cleanups
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v4 0/6] Driver cleanup and series to add triggered buffer
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v9 1/6] dmaengine: Add API function dmaengine_prep_peripheral_dma_vec()
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: backend: make use of dev_errp_probe()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: temperature: ltc2983: convert to dev_err_probe()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 1/4] dev_printk: add new dev_errp_probe() helper
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] Documentation: ABI: document in_temp_input file
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH] Documentation: ABI: document in_temp_input file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 11/11] iio: dac: support the ad9739a RF DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 09/11] iio: backend: add new functionality
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 03/11] iio: buffer-dma: Enable buffer write support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 00/11] iio: dac: support IIO backends on the output direction
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1] iio: adc: ad_sigma_delta: Clear pending interrupts before enable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: backend: make use of dev_errp_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: apds9306: Improve apds9306_write_event_config()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/2] iio: temperature: ltc2983: small improvements
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio:imu: adis16475: Fix sync mode setting
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7173: Fix ! vs ~ typo in ad7173_sel_clk()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: apds9306: Fix off by one in apds9306_sampling_freq_get()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/1] iio:imu: adis16475: Fix sync mode setting
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 16/34] iio: ad5755: hook up of_device_id lookup to platform driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] Documentation: ABI: document in_temp_input file
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH 16/34] iio: ad5755: hook up of_device_id lookup to platform driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 0/8] iio: accel: adxl345: Add spi-3wire feature
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/6] iio: adc: ad7173: Add support for AD411x devices
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/6] iio: adc: ad7173: refactor ain and vref selection
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/6] iio: adc: ad7173: fix buffers enablement for ad7176-2
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/8] IIO: More use of device_for_each_child_node_scoped() and __free()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/8] iio: adc: ab8500-gpadc: Allow COMPILE_TEST builds
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 8/8] iio: dac: ad5770r: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 7/8] iio: dac: ad3552r: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 7/7] iio: accel: adxl345: Add spi-3wire option
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: pressure: dps310: support negative pressure and temperature values
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/6] iio: pressure: Add triggered buffer support for BMP280 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/6] iio: pressure: Generalize read_{temp/press/humid}() functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 00/34] address all -Wunused-const warnings
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH] iio: dht11: set debug log level for parsing error messages
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: adc: adding support for PAC193x
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v2 11/11] iio: dac: support the ad9739a RF DAC
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v2 03/11] iio: buffer-dma: Enable buffer write support
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v2 04/11] iio: buffer-dmaengine: Support specifying buffer direction
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v2 07/11] dt-bindings: iio: dac: add docs for AD9739A
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v2 06/11] dt-bindings: iio: dac: add docs for AXI DAC IP
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v2 10/11] iio: dac: add support for AXI DAC IP core
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v2 05/11] iio: buffer-dmaengine: Enable write support
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v2 09/11] iio: backend: add new functionality
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v2 00/11] iio: dac: support IIO backends on the output direction
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v2 02/11] iio: buffer-dma: Rename iio_dma_buffer_data_available()
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v2 08/11] iio: core: add get_iio_backend() callback
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v2 01/11] iio: buffer-dma: add iio_dmaengine_buffer_setup()
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: adc: adding support for PAC193x
  • From: <Marius.Cristea@xxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: adc: adding support for PAC193x
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• [PATCH] iio: light: apds9306: Improve apds9306_write_event_config()
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH 1/8] iio: adc: ab8500-gpadc: Allow COMPILE_TEST builds
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: light: apds9306: Fix off by one in apds9306_sampling_freq_get()
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] iio:imu: adis16475: Fix sync mode setting
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v2 1/1] iio:imu: adis16475: Fix sync mode setting
  • From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
• [PATCH v2 0/1] iio:imu: adis16475: Fix sync mode setting
  • From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
• [Bug 218578] MXC6655 accelerometer not working with MXC4005 driver
  • From: bugzilla-daemon@xxxxxxxxxx
• [PATCH v1] iio: adc: ad_sigma_delta: Clear pending interrupts before enable
  • From: Markus Burri <markus.burri@xxxxxx>
• Re: [PATCH 0/4] dev_printk: add dev_errp_probe() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] iio: backend: make use of dev_errp_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] dev_printk: add dev_errp_probe() helper
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 3/4] iio: backend: make use of dev_errp_probe()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH 1/1] iio:imu: adis16475: Fix sync mode setting
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/1] iio:imu: adis16475: Fix sync mode setting
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 3/4] iio: backend: make use of dev_errp_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] dev_printk: add dev_errp_probe() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] iio: temperature: ltc2983: convert to dev_err_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] dev_printk: add dev_errp_probe() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/8] iio: adc: ab8500-gpadc: Use device_for_each_child_node_scoped() to simplify erorr paths.
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/8] iio: adc: ab8500-gpadc: Fix kernel-doc parameter names.
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/8] iio: adc: ab8500-gpadc: Allow COMPILE_TEST builds
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/4] dev_printk: add new dev_errp_probe() helper
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH 4/4] iio: common: scmi_iio: convert to dev_err_probe()
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH 2/4] iio: temperature: ltc2983: convert to dev_err_probe()
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH 0/4] dev_printk: add dev_errp_probe() helper
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH 3/4] iio: backend: make use of dev_errp_probe()
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: imu: add icm42688 inside inv_icm42600
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: imu: add icm42688 inside inv_icm42600
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH 06/10] dt-bindings: iio: dac: add bindings doc for AXI DAC driver
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 7/8] iio: dac: ad3552r: Use device_for_each_child_node_scoped()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 8/8] iio: dac: ad5770r: Use device_for_each_child_node_scoped()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 0/8] IIO: More use of device_for_each_child_node_scoped() and __free()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] iio: adc: ad7173: Fix ! vs ~ typo in ad7173_sel_clk()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: iio: temperature: ltc2983: document power supply
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v5 2/2] iio: temperature: ltc2983: support vdd regulator
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v5 0/2] iio: temperature: ltc2983: small improvements
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH] iio: adc: ad7173: Fix ! vs ~ typo in ad7173_sel_clk()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] iio: light: apds9306: Fix off by one in apds9306_sampling_freq_get()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: imu: inv_icm42600: add support of ICM-42688-P
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: imu: add icm42688 inside inv_icm42600
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 1/5] tools: iio: replace seekdir() in iio_generic_buffer
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 01/20] tools: iio: replace seekdir() in iio_generic_buffer
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 1/6] tools: iio: replace seekdir() in iio_generic_buffer
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.8 01/28] tools: iio: replace seekdir() in iio_generic_buffer
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 1/8] tools: iio: replace seekdir() in iio_generic_buffer
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 1/8] tools: iio: replace seekdir() in iio_generic_buffer
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 01/15] tools: iio: replace seekdir() in iio_generic_buffer
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 6/6] iio: adc: ad7173: Add support for AD411x devices
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 4/6] iio: adc: ad7173: refactor ain and vref selection
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 3/6] iio: adc: ad7173: refactor channel configuration parsing
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 1/1] iio:imu: adis16475: Fix sync mode setting
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH 1/1] iio:imu: adis16475: Fix sync mode setting
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• [PATCH 0/1] iio:imu: adis16475: Fix sync mode setting
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• Re: [PATCH 0/3] HID: Convert to platform remove callback returning void
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH 4/6] iio: adc: ad7173: refactor ain and vref selection
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH 3/6] iio: adc: ad7173: refactor channel configuration parsing
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH 16/34] iio: ad5755: hook up of_device_id lookup to platform driver
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH 6/6] iio: adc: ad7173: Add support for AD411x devices
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH 16/34] iio: ad5755: hook up of_device_id lookup to platform driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 6/6] iio: adc: ad7173: Add support for AD411x devices
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH 16/34] iio: ad5755: hook up of_device_id lookup to platform driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] iio: adc: ad7173: Add support for AD411x devices
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• [PATCH 16/34] iio: ad5755: hook up of_device_id lookup to platform driver
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 00/34] address all -Wunused-const warnings
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: imu: add icm42688 inside inv_icm42600
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 6/6] iio: pressure: Add triggered buffer support for BMP280 driver
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v3 3/6] iio: pressure: Generalize read_{temp/press/humid}() functions
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH] counter: ti-ecap-capture: Utilize COUNTER_COMP_FREQUENCY macro
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• Re: [PATCH 6/6] iio: adc: ad7173: Add support for AD411x devices
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v9 1/6] dmaengine: Add API function dmaengine_prep_peripheral_dma_vec()
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: pressure: dps310: support negative pressure and temperature values
  • From: HAEMMERLE Thomas <thomas.haemmerle@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 7/7] iio: accel: adxl345: Add spi-3wire option
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v2 0/2] iio: imu: inv_icm42600: add support of ICM-42688-P
  • From: inv.git-commit@xxxxxxx
• [PATCH v2 1/2] dt-bindings: iio: imu: add icm42688 inside inv_icm42600
  • From: inv.git-commit@xxxxxxx
• [PATCH v2 2/2] iio: imu: inv_icm42600: add support of ICM-42688-P
  • From: inv.git-commit@xxxxxxx
• Re: [PATCH 06/10] dt-bindings: iio: dac: add bindings doc for AXI DAC driver
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 07/10] dt-bindings: iio: dac: add bindings doc for AD9739A
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 07/10] dt-bindings: iio: dac: add bindings doc for AD9739A
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 6/6] iio: adc: ad7173: Add support for AD411x devices
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v7 8/8] iio: accel: adxl345: Add spi-3wire option
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v7 7/8] iio: accel: adxl345: Add comment to probe
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v7 6/8] iio: accel: adxl345: Reorder probe initialization
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v7 5/8] iio: accel: adxl345: Pass function pointer to core
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v7 4/8] dt-bindings: iio: accel: adxl345: Add spi-3wire
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v7 3/8] iio: accel: adxl345: Move defines to header
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v7 2/8] iio: accel: adxl345: Group bus configuration
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v7 1/8] iio: accel: adxl345: Make data_range obsolete
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v7 0/8] iio: accel: adxl345: Add spi-3wire feature
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH 6/6] iio: adc: ad7173: Add support for AD411x devices
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 5/6] iio: adc: ad7173: Remove index from temp channel
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 4/6] iio: adc: ad7173: refactor ain and vref selection
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 3/6] iio: adc: ad7173: refactor channel configuration parsing
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 2/6] iio: adc: ad7173: fix buffers enablement for ad7176-2
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: imu: add icm42688 inside inv_icm42600
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v6 7/7] iio: accel: adxl345: Add spi-3wire option
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v5 7/7] iio: accel: adxl345: Add spi-3wire option
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: industrialio-core: look for aliases to request device index
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v5 7/7] iio: accel: adxl345: Add spi-3wire option
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH v6 7/7] iio: accel: adxl345: Add spi-3wire option
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH 6/6] iio: adc: ad7173: Add support for AD411x devices
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH 5/6] iio: adc: ad7173: Remove index from temp channel
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH 4/6] iio: adc: ad7173: refactor ain and vref selection
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH 3/6] iio: adc: ad7173: refactor channel configuration parsing
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH 2/6] iio: adc: ad7173: fix buffers enablement for ad7176-2
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH 0/6] Add support for AD411x
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• Re: [PATCH 07/10] dt-bindings: iio: dac: add bindings doc for AD9739A
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 06/10] dt-bindings: iio: dac: add bindings doc for AXI DAC driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: imu: add icm42688 inside inv_icm42600
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] iio: industrialio-core: look for aliases to request device index
  • From: Dominique Martinet <dominique.martinet@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: industrialio-core: look for aliases to request device index
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 8/8] iio: adc: pac1934: Use device_for_each_available_child_node_scoped() to simplify error handling.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 7/8] iio: dac: ad3552: Use __free(fwnode_handle) to simplify error handling.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 5/8] iio: adc: ad7173: Use device_for_each_child_node_scoped() to simplify error paths.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 6/8] iio: frequency: admfm2000: Use device_for_each_child_node_scoped() to simplify error paths.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 4/8] iio: adc: ad4130: Use device_for_each_child_node_scoped() to simplify error paths.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 3/8] iio: adc: ab8500-gpadc: Use device_for_each_child_node_scoped() to simplify erorr paths.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/8] iio: adc: ab8500-gpadc: Fix kernel-doc parameter names.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 0/8] IIO: More use of device_for_each_child_node_scoped() and __free()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 1/8] iio: adc: ab8500-gpadc: Allow COMPILE_TEST builds
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v6 8/8] iio: dac: ad5770r: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v6 7/8] iio: dac: ad3552r: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v6 6/8] iio: adc: ti-ads131e08: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v6 5/8] iio: adc: ti-ads1015: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v6 4/8] iio: adc: stm32: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v6 3/8] iio: adc: stm32: Fixing err code to not indicate success
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v6 2/8] iio: adc: qcom-spmi-adc5: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v6 1/8] iio: adc: mcp3564: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v6 0/8] IIO: Use device_for_each_child_scope()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 07/10] dt-bindings: iio: dac: add bindings doc for AD9739A
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] drivers/iio/adc: Add XuanTie TH1520 ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: adc: Document XuanTie TH1520 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: imu: add icm42688 inside inv_icm42600
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: ad7944: use spi_optimize_message()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 1/7] regulator: devres: add APIs for reference supplies
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 7/7] iio: accel: adxl345: Add spi-3wire option
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 7/7] iio: accel: adxl345: Add spi-3wire option
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/7] iio: accel: adxl345: Make data_range obsolete
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: adc: Document XuanTie TH1520 ADC
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: adc: Document XuanTie TH1520 ADC
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 3/3] dt-bindings: adc: Document XuanTie TH1520 ADC
  • From: wefu@xxxxxxxxxx
• [PATCH 2/3] riscv: dts: thead: Add XuanTie TH1520 ADC device node
  • From: wefu@xxxxxxxxxx
• [PATCH 1/3] drivers/iio/adc: Add XuanTie TH1520 ADC driver
  • From: wefu@xxxxxxxxxx
• [PATCH 0/3] iio: adc: add ADC driver for XuanTie TH1520 SoC
  • From: wefu@xxxxxxxxxx
• Re: [PATCH 07/10] dt-bindings: iio: dac: add bindings doc for AD9739A
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 06/10] dt-bindings: iio: dac: add bindings doc for AXI DAC driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 1/2] iio: imu: inv_icm42600: add support of ICM-42688-P
  • From: inv.git-commit@xxxxxxx
• [PATCH 2/2] dt-bindings: iio: imu: add icm42688 inside inv_icm42600
  • From: inv.git-commit@xxxxxxx
• [PATCH 0/2] iio: imu: inv_icm42600: add support of ICM-42688-P
  • From: inv.git-commit@xxxxxxx
• Re: [PATCH 2/2] dt-bindings: iio: imu: add icm42688 inside inv_icm42600
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [Upstream] [PATCH 0/2] i.MX93 ADC calibration settings
  • From: Primoz Fiser <primoz.fiser@xxxxxxxxx>
• [PATCH v6 7/7] iio: accel: adxl345: Add spi-3wire option
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v6 6/7] iio: accel: adxl345: Add comment to probe
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v6 5/7] iio: accel: adxl345: Pass function pointer to core
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v6 4/7] dt-bindings: iio: accel: adxl345: Add spi-3wire
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v6 3/7] iio: accel: adxl345: Move defines to header
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v6 2/7] iio: accel: adxl345: Group bus configuration
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v6 1/7] iio: accel: adxl345: Make data_range obsolete
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v6 0/7] iio: accel: adxl345: Add spi-3wire feature
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH v5 7/7] iio: accel: adxl345: Add spi-3wire option
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH v5 1/7] iio: accel: adxl345: Make data_range obsolete
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v2] iio: adc: ad7944: use spi_optimize_message()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH RFC 1/7] regulator: devres: add APIs for reference supplies
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH RFC 1/7] regulator: devres: add APIs for reference supplies
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH RFC 1/7] regulator: devres: add APIs for reference supplies
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH RFC 1/7] regulator: devres: add APIs for reference supplies
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v4 0/6] iio: temperature: ltc2983: small improvements
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v4 0/6] iio: temperature: ltc2983: small improvements
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/10] iio: backend: add new functionality
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 10/10] iio: dac: support the ad9739a RF DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 09/10] iio: dac: add support for AXI DAC IP core
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 10/10] iio: dac: support the ad9739a RF DAC
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v4 6/6] iio: common: scmi_iio: convert to dev_err_probe()
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v4 4/6] iio: temperature: ltc2983: support vdd regulator
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v4 5/6] iio: backend: make use dev_errp_probe()
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v4 1/6] printk: add new dev_errp_probe() helper
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v4 3/6] dt-bindings: iio: temperature: ltc2983: document power supply
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v4 2/6] iio: temperature: ltc2983: convert to dev_err_probe()
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v4 0/6] iio: temperature: ltc2983: small improvements
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• Re: [PATCH 08/10] iio: backend: add new functionality
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH][next] iio: addac: ad74115: remove redundant if statement
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH RFC 1/7] regulator: devres: add APIs for reference supplies
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 01/10] iio: buffer: add helper for setting direction
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 3/7] hwmon: (da9052) Use devm_regulator_get_enable_get_voltage()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 10/10] iio: dac: support the ad9739a RF DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/10] iio: backend: add new functionality
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 09/10] iio: dac: add support for AXI DAC IP core
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 3/7] hwmon: (da9052) Use devm_regulator_get_enable_get_voltage()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 01/10] iio: buffer: add helper for setting direction
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 08/10] iio: backend: add new functionality
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 01/10] iio: buffer: add helper for setting direction
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 7/7] Input: mpr121: Use devm_regulator_get_enable_get_voltage()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 3/7] hwmon: (da9052) Use devm_regulator_get_enable_get_voltage()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH][next] iio: addac: ad74115: remove redundant if statement
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH RFC 2/7] hwmon: (adc128d818) Use devm_regulator_get_optional_enable_get_voltage()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 4/7] iio: addac: ad74115: Use devm_regulator_get_enable_get_voltage()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH][next] iio: addac: ad74115: remove redundant if statement
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH RFC 5/7] iio: frequency: admv1013: Use devm_regulator_get_enable_get_voltage()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 6/7] staging: iio: impedance-analyzer: admv1013: Use devm_regulator_get_enable_get_voltage()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 1/7] regulator: devres: add APIs for reference supplies
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 7/7] iio: accel: adxl345: Add spi-3wire option
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/7] iio: accel: adxl345: Make data_range obsolete
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: pressure: dps310: support negative pressure and temperature values
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: adc: ad7944: simplify adi,spi-mode property parsing
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 10/10] iio: dac: support the ad9739a RF DAC
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH 05/10] iio: buffer-dmaengine: Enable write support
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH 07/10] dt-bindings: iio: dac: add bindings doc for AD9739A
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH 08/10] iio: backend: add new functionality
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH 09/10] iio: dac: add support for AXI DAC IP core
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH 06/10] dt-bindings: iio: dac: add bindings doc for AXI DAC driver
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH 04/10] iio: buffer-dmaengine: Support specifying buffer direction
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH 03/10] iio: buffer-dma: Enable buffer write support
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH 02/10] iio: buffer-dma: Rename iio_dma_buffer_data_available()
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH 01/10] iio: buffer: add helper for setting direction
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH 00/10] iio: dac: support IIO backends on the output direction
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• Re: [PATCH v4 1/7] iio: accel: adxl345: Make data_range obsolete
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC 2/2] iio: accel: mxc4005: Reset chip on probe() and resume()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: imx93: drop the 4th interrupt for ADC
  • From: Shawn Guo <shawnguo2@xxxxxxxx>
• [PATCH][next] iio: addac: ad74115: remove redundant if statement
  • From: Colin Ian King <colin.i.king@xxxxxxxxx>
• Re: [PATCH v5 4/7] dt-bindings: iio: accel: adxl345: Add spi-3wire
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH v5 4/7] dt-bindings: iio: accel: adxl345: Add spi-3wire
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH v5 4/7] dt-bindings: iio: accel: adxl345: Add spi-3wire
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v9 1/6] dmaengine: Add API function dmaengine_prep_peripheral_dma_vec()
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH RFC 7/7] Input: mpr121: Use devm_regulator_get_enable_get_voltage()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH RFC 6/7] staging: iio: impedance-analyzer: admv1013: Use devm_regulator_get_enable_get_voltage()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH RFC 5/7] iio: frequency: admv1013: Use devm_regulator_get_enable_get_voltage()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH RFC 4/7] iio: addac: ad74115: Use devm_regulator_get_enable_get_voltage()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH RFC 3/7] hwmon: (da9052) Use devm_regulator_get_enable_get_voltage()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH RFC 2/7] hwmon: (adc128d818) Use devm_regulator_get_optional_enable_get_voltage()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH RFC 1/7] regulator: devres: add APIs for reference supplies
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH RFC 0/7] regulator: new APIs for voltage reference supplies
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v5 7/7] iio: accel: adxl345: Add spi-3wire option
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v5 6/7] iio: accel: adxl345: Add comment to probe
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v5 5/7] iio: accel: adxl345: Pass function pointer to core
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v5 4/7] dt-bindings: iio: accel: adxl345: Add spi-3wire
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v5 3/7] iio: accel: adxl345: Move defines to header
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v5 2/7] iio: accel: adxl345: Group bus configuration
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v5 1/7] iio: accel: adxl345: Make data_range obsolete
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v5 0/7] iio: accel: adxl345: Add spi-3wire feature
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH v9 3/6] iio: core: Add new DMABUF interface infrastructure
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v9 3/6] iio: core: Add new DMABUF interface infrastructure
  • From: Andrew Davis <afd@xxxxxx>
• [Bug 218578] MXC6655 accelerometer not working with MXC4005 driver
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [RFC 0/2] iio: accel: mxc4005: IRQ fixes + reset chip on probe()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH] iio: pressure: dps310: support negative pressure and temperature values
  • From: Thomas Haemmerle <thomas.haemmerle@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/7] dt-bindings: iio: accel: adxl345: Add spi-3wire
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [Bug 218578] MXC6655 accelerometer not working with MXC4005 driver
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 218578] MXC6655 accelerometer not working with MXC4005 driver
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v4 1/7] iio: accel: adxl345: Make data_range obsolete
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH v4 4/7] dt-bindings: iio: accel: adxl345: Add spi-3wire
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: iio: GSoC 2024: RFC on AD7294-2 driver proposal
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: iio: dac: ti,dac5571: Add DAC081C081 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7944: use spi_optimize_message()
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: iio: dac: ti,dac5571: Add DAC081C081 support
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: iio: dac: ti,dac5571: Add DAC081C081 support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: iio: dac: ti,dac5571: Add DAC081C081 support
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: dht11: set debug log level for parsing error messages
  • From: Harald Geyer <harald@xxxxxxxxx>
• [Bug 218578] MXC6655 accelerometer not working with MXC4005 driver
  • From: bugzilla-daemon@xxxxxxxxxx
• [RFC 2/2] iio: accel: mxc4005: Reset chip on probe() and resume()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [RFC 1/2] iio: accel: mxc4005: Interrupt handling fixes
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [RFC 0/2] iio: accel: mxc4005: IRQ fixes + reset chip on probe()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: iio: dac: ti,dac5571: Add DAC081C081 support
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH 2/5] iio: dac: ti-dac5571: Add DAC081C081 support
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: iio: dac: ti,dac5571: Add DAC081C081 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/7] dt-bindings: iio: accel: adxl345: Add spi-3wire
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: iio: dac: ti,dac5571: Add DAC081C081 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] IIO: 3rd set for 6.9 - cleanup.h handling of fwnode_handle_put() related (not ordered wrt to PULL 2)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/7] iio: accel: adxl345: Make data_range obsolete
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: iio: dac: ti,dac5571: Add DAC081C081 support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/7] dt-bindings: iio: accel: adxl345: Add spi-3wire
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH] iio: adc: ad7944: use spi_optimize_message()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v4 2/7] iio: accel: adxl345: Group bus configuration
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH v4 4/7] dt-bindings: iio: accel: adxl345: Add spi-3wire
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 4/7] dt-bindings: iio: accel: adxl345: Add spi-3wire
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: iio: dac: ti,dac5571: Add DAC081C081 support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: dht11: set debug log level for parsing error messages
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 7/7] iio: accel: adxl345: Add spi-3wire option
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 5/7] iio: accel: adxl345: Pass function pointer to core
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/7] iio: accel: adxl345: Group bus configuration
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/5] iio: dac: ti-dac5571: Add DAC081C081 support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 0/5] arm64: dts: Add device tree source for the Au-Zone Maivin AI Vision Starter Kit
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 1/5] dt-bindings: iio: dac: ti,dac5571: Add DAC081C081 support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: health: maxim,max30102: add max30101
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dht11: set debug log level for parsing error messages
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 4/7] iio: adc: ad7380: add support for pseudo-differential parts
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v5 4/7] iio: adc: ad7380: add support for pseudo-differential parts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH v2 4/4] iio: adc: rcar-gyroadc: use for_each_available_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3] iio: adc: ad7944: simplify adi,spi-mode property parsing
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v4 2/4] HID: hid-sensor-custom: Convert sprintf() family to sysfs_emit() family
  • From: "Zhijian Li (Fujitsu)" <lizhijian@xxxxxxxxxxx>
• Re: [PATCH] iio: dht11: set debug log level for parsing error messages
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: health: maxim,max30102: fix compatible check
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v5 7/7] iio: adc: ad7380: add support for ad738x-4 4 channels variants
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dht11: set debug log level for parsing error messages
  • From: Harald Geyer <harald@xxxxxxxxx>
• Re: [PATCH v4 4/7] dt-bindings: iio: accel: adxl345: Add spi-3wire
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] iio: dht11: set debug log level for parsing error messages
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• [PATCH v4 7/7] iio: accel: adxl345: Add spi-3wire option
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v4 6/7] iio: accel: adxl345: Add comment to probe
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v4 5/7] iio: accel: adxl345: Pass function pointer to core
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v4 4/7] dt-bindings: iio: accel: adxl345: Add spi-3wire
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v4 3/7] iio: accel: adxl345: Move defines to header
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v4 1/7] iio: accel: adxl345: Make data_range obsolete
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v4 0/7] iio: accel: adxl345: Add spi-3wire feature
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH v5 7/7] iio: adc: ad7380: add support for ad738x-4 4 channels variants
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 0/6] iio: accel: adxl345: Add spi-3wire feature
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 4/6] iio: accel: adxl345: Remove single info instances
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 3/6] iio: accel: adxl345: Add spi-3wire option
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [Upstream] [PATCH 0/2] i.MX93 ADC calibration settings
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: adc: nxp,imx93-adc.yaml: Add calibration properties
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v5 4/7] iio: adc: ad7380: add support for pseudo-differential parts
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add support for AD4000
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: health: maxim,max30102: add max30101
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: adc: nxp,imx93-adc.yaml: Add calibration properties
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [Upstream] [PATCH 0/2] i.MX93 ADC calibration settings
  • From: Primoz Fiser <primoz.fiser@xxxxxxxxx>
• Re: [PATCH 0/2] i.MX93 ADC calibration settings
  • From: Andrej Picej <andrej.picej@xxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: iio: accel: adxl345: Add spi-3wire
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2] treewide, serdev: change receive_buf() return type to size_t
  • From: patchwork-bot+chrome-platform@xxxxxxxxxx
• Re: [PATCH v3 00/32] spi: get rid of some legacy macros
  • From: patchwork-bot+chrome-platform@xxxxxxxxxx
• Re: [PATCH v3 00/32] spi: get rid of some legacy macros
  • From: patchwork-bot+chrome-platform@xxxxxxxxxx
• Re: [PATCH v2] treewide, serdev: change receive_buf() return type to size_t
  • From: patchwork-bot+chrome-platform@xxxxxxxxxx
• Re: [PATCH v3 0/6] iio: accel: adxl345: Add spi-3wire feature
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v2 2/2] iio: health: max30102: add support for max30101
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: health: maxim,max30102: add max30101
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 0/2] iio: health: max30102: add support for max30101
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v3 4/6] iio: accel: adxl345: Remove single info instances
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: health: maxim,max30102: add max30101
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v3 3/6] iio: accel: adxl345: Add spi-3wire option
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: imx93: Make calibration properties configurable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] i.MX93 ADC calibration settings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: adc: nxp,imx93-adc.yaml: Add calibration properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: pressure: hsc030pa: Use spi_read()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: accel: adxl345: Update adxl345
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: health: maxim,max30102: add max30101
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: health: maxim,max30102: add max30101
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/6] iio: accel: adxl345: Add spi-3wire feature
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/6] iio: accel: adxl345: Group bus configuration
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/6] iio: accel: adxl345: Remove single info instances
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/6] iio: accel: adxl345: Add spi-3wire option
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adxl345: add spi-3wire
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 7/7] iio: adc: ad7380: add support for ad738x-4 4 channels variants
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 5/7] iio: adc: ad7380: prepare for parts with more channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 4/7] iio: adc: ad7380: add support for pseudo-differential parts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add support for AD4000
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/7] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: pressure: hsc030pa: Use spi_read()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: ad7944: simplify adi,spi-mode property parsing
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/4] HID: hid-sensor-custom: Convert sprintf() family to sysfs_emit() family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/6] iio: pressure: Add triggered buffer support for BMP280 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/6] iio: pressure: Add triggered buffer support for BMP280 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/6] iio: pressure: Add timestamp and scan_masks for BMP280 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/6] iio: pressure: Generalize read_{temp/press/humid}() functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/6] iio: pressure: Introduce new cleanup routines to BMP280 driver *_raw() functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/6] iio: pressure: BMP280 core driver headers sorting
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v9 0/6] iio: new DMABUF based API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: health: maxim,max30102: fix compatible check
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add support for AD4000
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: Add AD4000
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v2] iio: adc: ad7944: simplify adi,spi-mode property parsing
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: Add AD4000
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: Add AD4000
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add support for AD4000
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: Add AD4000
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] docs: iio: new docs for ad7944 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: ad7944: simplify adi,spi-mode property parsing
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: ad7944: simplify adi,spi-mode property parsing
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: ad7944: Add support for "3-wire mode"
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: Fix the sorting functionality in iio_gts_build_avail_time_table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/4] iio: inkern: move to the cleanup.h magic
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: iio: accel: adxl345: Add spi-3wire
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH v3 6/6] dt-bindings: iio: accel: adxl345: Add spi-3wire
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: iio: accel: adxl345: Add spi-3wire
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 6/6] dt-bindings: iio: accel: adxl345: Add spi-3wire
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v3 5/6] iio: accel: adxl345: Group bus configuration
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v3 4/6] iio: accel: adxl345: Remove single info instances
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v3 3/6] iio: accel: adxl345: Add spi-3wire option
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v3 2/6] iio: accel: adxl345: Make data_range obsolete
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v3 1/6] iio: accel: adxl345: Pass function pointer to core
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v3 0/6] iio: accel: adxl345: Add spi-3wire feature
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH v2 1/3] iio: accel: adxl345: Update adxl345
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: iio: accel: adxl345: Add spi-3wire
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: Add AD4000
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: Add AD4000
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: Add AD4000
  • From: Rob Herring <robh@xxxxxxxxxx>
• [Bug 218578] MXC6655 accelerometer not working with MXC4005 driver
  • From: bugzilla-daemon@xxxxxxxxxx
• [PATCH 2/2] iio: adc: Add support for AD4000
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: adc: Add AD4000
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH 0/2] Add support for AD4000 series
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v2 2/2] docs: iio: new docs for ad7944 driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 1/2] MAINTAINERS: add Documentation/iio/ to IIO subsystem
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 0/2] docs: iio: new docs for ad7944 driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: adc: nxp,imx93-adc.yaml: Add calibration properties
  • From: Andrej Picej <andrej.picej@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: adc: nxp,imx93-adc.yaml: Add calibration properties
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: adc: nxp,imx93-adc.yaml: Add calibration properties
  • From: Andrej Picej <andrej.picej@xxxxxxxxx>
• Re: [PATCH v2 1/3] iio: accel: adxl345: Update adxl345
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 1/3] iio: accel: adxl345: Update adxl345
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 1/2] iio: adxl345: add spi-3wire
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: adc: nxp,imx93-adc.yaml: Add calibration properties
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/3] iio: accel: adxl345: Update adxl345
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: accel: adxl345: Update adxl345
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adxl345: add spi-3wire
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adxl345: update documentation for spi-3wire
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: iio: accel: adxl345: Add spi-3wire
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: health: maxim,max30102: add max30101
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 3/3] dt-bindings: iio: accel: adxl345: Add spi-3wire
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v2 2/3] iio: accel: adxl345: Add spi-3wire feature
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v2 1/3] iio: accel: adxl345: Update adxl345
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v2 0/3] iio: adxl345: add spi-3wire
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH 1/2] iio: adxl345: add spi-3wire
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH 1/2] iio: adxl345: add spi-3wire
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH 2/2] iio: adxl345: update documentation for spi-3wire
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH 2/2] iio: health: max30102: add support for max30101
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: health: maxim,max30102: add max30101
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 0/2] iio: health: max30102: add support for max30101
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH] counter: ti-ecap-capture: Utilize COUNTER_COMP_FREQUENCY macro
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• Re: [PATCH v3 5/6] iio: pressure: Add timestamp and scan_masks for BMP280 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: adc: nxp,imx93-adc.yaml: Add calibration properties
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 6/6] iio: pressure: Add triggered buffer support for BMP280 driver
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v3 5/6] iio: pressure: Add timestamp and scan_masks for BMP280 driver
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v3 6/6] iio: pressure: Add triggered buffer support for BMP280 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 5/6] iio: pressure: Add timestamp and scan_masks for BMP280 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 5/6] iio: pressure: Add timestamp and scan_masks for BMP280 driver
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v3 6/6] iio: pressure: Add triggered buffer support for BMP280 driver
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: adc: nxp,imx93-adc.yaml: Add calibration properties
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: adc: nxp,imx93-adc.yaml: Add calibration properties
  • From: Andrej Picej <andrej.picej@xxxxxxxxx>
• Re: [PATCH v3 6/6] iio: pressure: Add triggered buffer support for BMP280 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 5/6] iio: pressure: Add timestamp and scan_masks for BMP280 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/6] iio: pressure: Add SCALE and RAW values for channels
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/6] iio: pressure: Introduce new cleanup routines to BMP280 driver *_raw() functions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/6] iio: pressure: Generalize read_{temp/press/humid}() functions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/6] iio: pressure: BMP280 core driver headers sorting
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/6] iio: pressure: Introduce new cleanup routines to BMP280 driver *_raw() functions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: adc: nxp,imx93-adc.yaml: Add calibration properties
  • From: Andrej Picej <andrej.picej@xxxxxxxxx>
• [PATCH 0/2] i.MX93 ADC calibration settings
  • From: Andrej Picej <andrej.picej@xxxxxxxxx>
• [PATCH 1/2] iio: adc: imx93: Make calibration properties configurable
  • From: Andrej Picej <andrej.picej@xxxxxxxxx>
• Re: [PATCH 1/2] iio: adxl345: add spi-3wire
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: adc: nxp,imx93-adc.yaml: Add calibration properties
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adxl345: add spi-3wire
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adxl345: update documentation for spi-3wire
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [Bug 218578] MXC6655 accelerometer not working with MXC4005 driver
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH] iio: Fix the sorting functionality in iio_gts_build_avail_time_table
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH 0/2] iio: adxl345: add spi-3wire and refac
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>