Linux IIO Development

• Thread Index

• [RFC PATCH 11/13] iio: dac: ad5770r: Use __free(fwnode_handle) to replace fwnode_handle_put() calls
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 10/13] iio: dac: ad3552: Use __free(fwnode_handle) to replace fwnode_handle_put() calls
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 09/13] iio: addac: ad74413r: Use __free(fwnode_handle) to replace fwnode_handle_put() calls
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 08/13] iio: adc: ti-ads131e08: Use __free(fwnode_handle) to replace fwnode_handle_put() calls
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 07/13] iio: adc: ti-ads1015: Use __free(fwnode_handle) to replace fwnode_handle_put() calls
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 06/13] iio: adc: stm32: Use __free(fwnode_handle) to replace fwnode_handle_put() calls
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 05/13] iio: adc: rzg2l_adc: Use __free(fwnode_handle) to replace fwnode_handle_put() calls
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 04/13] iio: adc: qcom-spmi-adc5: Use __free(fwnode_handle) to replace fwnode_handle_put() calls
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 03/13] iio: adc: mcp3564: Use __free(fwnode_handle) to replace fwnode_handle_put() calls
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 02/13] iio: adc: max11410: Use __free(fwnode_handle) to replace fwnode_handle_put() calls
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 01/13] device property: Add cleanup.h based fwnode_handle_put() scope based cleanup.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 00/13] device property / IIO: Use cleanup.h magic for fwnode_handle_put() handling.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: da280: Simplify id-matching
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: accel: da280: Simplify id-matching
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 02/24] iio: accel: kxcjk-1013: Move acpi_device_id table under ifdef CONFIG_ACPI
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 01/24] iio: accel: da280: Stop using ACPI_PTR()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio/adc: Move QCOM ADC bindings to iio/adc folder
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/2] io: light: as73211: add support for as7331
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH v3 3/3] iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 23/24] iio: light: max44000: drop ACPI_PTR() and CONFIG_ACPI guards
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 24/24] iio: adc: ti-adc109s102: drop ACPI_PTR() and CONFIG_ACPI guards
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 22/24] iio: pressure: hp206c: drop ACPI_PTR() and CONFIG_ACPI guards
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 21/24] iio: st_sensors: drop ACPI_PTR() and CONFIG_ACPI guards
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 19/24] iio: magnetometer: mmc35240: Drop ACPI_PTR() usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 20/24] iio: potentiometer: max5487: Drop ACPI_PTR() usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 17/24] iio: light: us5182d: Drop ACPI_PTR() usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 16/24] iio: light: stk3310: Drop ACPI_PTR() usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 18/24] iio: magnetometer: bmc150: Drop ACPI_PTR() usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 15/24] iio: light: rpr0521: Drop ACPI_PTR() usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 13/24] iio: light: jsa1212: Drop ACPI_PTR() usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 14/24] iio: light: ltr501: Drop ACPI_PTR() usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 11/24] iio: imu: fxos8700: Drop ACPI_PTR() usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 12/24] iio: imu: kmx61: Drop ACPI_PTR() usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 10/24] iio: humidity: hts221: Drop ACPI_PTR() usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 08/24] iio: accel: bmc150: Drop ACPI_PTR()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 09/24] iio: gyro: bmg160: Drop ACPI_PTR() usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 07/24] iio: accel: stk8ba50: Drop ACPI_PTR() usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 05/24] iio: accel: mxc4005: Drop ACPI_PTR() usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 03/24] iio: accel: mma9551: Drop ACPI_PTR() usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 06/24] iio: accel: mxc6255: Drop ACPI_PTR() usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 00/24] IIO: Clean up ACPI_PTR() usage.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 04/24] iio: accel: mma9553: Drop ACPI_PTR() usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 01/24] iio: accel: da280: Stop using ACPI_PTR()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 02/24] iio: accel: kxcjk-1013: Move acpi_device_id table under ifdef CONFIG_ACPI
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 3/3] iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: iio/adc: Move QCOM ADC bindings to iio/adc folder
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [PATCH v3 0/3] iio: adc: Add support for QCOM SPMI PMIC5 Gen3 ADC
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [PATCH v2] iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC
  • From: zhouzhouyi@xxxxxxxxx
• [PATCH 1/1] drivers/iio/magnetometer/rm3100-core.c:add boundary check for the value read from RM3100_REG_TMRC
  • From: "zhili.liu" <zhili.liu@xxxxxxxxxxx>
• Re: [PULL] IIO: 2nd set of new device support and cleanup for 6.8
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PULL] IIO: 2nd set of new device support and cleanup for 6.8
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: rtq6056: Add support for the whole RTQ6056 family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 08/10] iio: pressure: mprls0025pa.c refactor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 07/10] iio: pressure: mprls0025pa.c whitespace cleanup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 01/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml fix
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 10/10] iio: pressure: mprls0025pa add SPI driver
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v3 09/10] iio: pressure: mprls0025pa add triplet property
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v3 08/10] iio: pressure: mprls0025pa refactor
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v3 07/10] iio: pressure: mprls0025pa whitespace cleanup
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v3 05/10] iio: pressure: mprls0025pa improve driver error resilience
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v3 06/10] iio: pressure: mprls0025pa remove defaults
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v3 00/10] changes to mprls0025pa
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v3 03/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add spi bus
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v3 04/10] iio: pressure: mprls0025pa fix off-by-one enum
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v3 02/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add pressure-triplet
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v3 01/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml improvements
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• Re: [PATCH] counter: linux/counter.h: fix Excess kernel-doc description warning
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: rtq6056: add support for the whole RTQ6056 family
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/2] iio: adc: rtq6056: Add support for the whole RTQ6056 family
  • From: <cy_huang@xxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: adc: rtq6056: add support for the whole RTQ6056 family
  • From: <cy_huang@xxxxxxxxxxx>
• [PATCH v2 0/2] RTQ6056: Add compatible for the same chip family
  • From: <cy_huang@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: rtq6056: add support for the whole RTQ6056 family
  • From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: rtq6056: add support for the whole RTQ6056 family
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: rtq6056: add support for the whole RTQ6056 family
  • From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
• Re: [PATCH 0/2] RTQ6056: Add compatible for the same chip family
  • From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
• Re: [PATCH 0/2] RTQ6056: Add compatible for the same chip family
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: rtq6056: add support for the whole RTQ6056 family
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: rtq6056: add support for the whole RTQ6056 family
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/2] iio: adc: rtq6056: Add support for the whole RTQ6056 family
  • From: <cy_huang@xxxxxxxxxxx>
• [PATCH 0/2] RTQ6056: Add compatible for the same chip family
  • From: <cy_huang@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: adc: rtq6056: add support for the whole RTQ6056 family
  • From: <cy_huang@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: rtq6056: add support for the whole RTQ6056 family
  • From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: rtq6056: add support for the whole RTQ6056 family
  • From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: rtq6056: add support for the whole RTQ6056 family
  • From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
• Re: [PATCH] counter: linux/counter.h: fix Excess kernel-doc description warning
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v2 07/10] iio: pressure: mprls0025pa.c whitespace cleanup
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 08/10] iio: pressure: mprls0025pa.c refactor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 07/10] iio: pressure: mprls0025pa.c whitespace cleanup
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 04/10] iio: pressure: mprls0025pa.c fix off-by-one enum
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] counter: linux/counter.h: fix Excess kernel-doc description warning
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v2 08/10] iio: pressure: mprls0025pa.c refactor
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 01/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml fix
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 10/10] iio: pressure: mprls0025pa.c add SPI driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 08/10] iio: pressure: mprls0025pa.c refactor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 06/10] iio: pressure: mprls0025pa.c remove dangerous defaults
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 05/10] iio: pressure: mprls0025pa.c fix error flag check
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 04/10] iio: pressure: mprls0025pa.c fix off-by-one enum
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 01/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml fix
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 01/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml fix
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: rtq6056: add support for the whole RTQ6056 family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: vcnl4000: Set ps high definition for 4040/4200
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] io: light: as73211: add support for as7331
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: linux/iio.h: fix Excess kernel-doc description warning
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 6/8] iio: add the IIO backend framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/8] dt-bindings: adc: axi-adc: deprecate 'adi,adc-dev'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] iio: sx9324: avoid copying property strings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 11/11] MAINTAINERS: Add MAINTAINERS entry for AD7091R
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/8] iio: new DMABUF based API, v5
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 7/8] iio: buffer-dmaengine: Support new DMABUF based userspace API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 6/8] iio: buffer-dma: Enable support for DMABUFs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] Added tilt interrupt support in inv_icm42600
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: rtq6056: add support for the whole RTQ6056 family
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: rtq6056: add support for the whole RTQ6056 family
  • From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
• Re: [PATCH v2 03/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add spi bus
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: rtq6056: add support for the whole RTQ6056 family
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 03/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add spi bus
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 03/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add spi bus
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 03/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add spi bus
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 02/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add pressure-triplet
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 02/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add pressure-triplet
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 02/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add pressure-triplet
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 02/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add pressure-triplet
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 03/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add spi bus
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 02/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add pressure-triplet
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 01/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml fix
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 05/10] iio: pressure: mprls0025pa.c fix error flag check
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v2 09/10] iio: pressure: mprls0025pa.c add triplet property
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v2 10/10] iio: pressure: mprls0025pa.c add SPI driver
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v2 08/10] iio: pressure: mprls0025pa.c refactor
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v2 07/10] iio: pressure: mprls0025pa.c whitespace cleanup
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v2 06/10] iio: pressure: mprls0025pa.c remove dangerous defaults
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v2 03/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add spi bus
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v2 04/10] iio: pressure: mprls0025pa.c fix off-by-one enum
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v2 02/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add pressure-triplet
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v2 00/10] changes to mprls0025pa
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v2 01/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml fix
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] iio: light: add support for AMS AS7331
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [GIT PULL] First set of Counter updates for 6.8
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: as73211: add support for as7331
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 0/2] iio: light: add support for AMS AS7331
  • From: Christian Eggers <ceggers@xxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: pressure: honeywell,mprls0025pa
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH 2/2] io: light: as73211: add support for as7331
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: light: as73211: add support for as7331
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 0/2] iio: light: add support for AMS AS7331
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v2 0/9] Support light color temperature and chromaticity
  • From: "Linux regression tracking #update (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
• [PATCH] iio: linux/iio.h: fix Excess kernel-doc description warning
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH] counter: linux/counter.h: fix Excess kernel-doc description warning
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH] HID: sensor-hub: Enable hid core report processing for all devices
  • From: Benjamin Tissoires <bentiss@xxxxxxxxxx>
• Re: [PATCH] HID: sensor-hub: Enable hid core report processing for all devices
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: pressure: honeywell,mprls0025pa
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] HID: sensor-hub: Enable hid core report processing for all devices
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [GIT PULL] First set of Counter updates for 6.8
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH] HID: sensor-hub: Enable hid core report processing for all devices
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH v5 11/11] MAINTAINERS: Add MAINTAINERS entry for AD7091R
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH] HID: sensor-hub: Enable hid core report processing for all devices
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] Added tilt interrupt support in inv_icm42600
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH v4 6/8] iio: add the IIO backend framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v4 7/8] iio: adc: ad9467: convert to backend framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v4 2/8] dt-bindings: adc: axi-adc: deprecate 'adi,adc-dev'
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v5 7/8] iio: buffer-dmaengine: Support new DMABUF based userspace API
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v5 6/8] iio: buffer-dma: Enable support for DMABUFs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v4 4/8] of: property: add device link support for io-backends
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/8] dt-bindings: adc: ad9467: add new io-backend property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 06/13] of: property: fw_devlink: Add support for "access-controller"
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 04/13] dt-bindings: bus: document ETZPC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 03/13] dt-bindings: bus: document RIFSC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 01/13] dt-bindings: document generic access controllers
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1] dt-bindings: input: convert drv266x to json-schema
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• [PATCH v1] dt-bindings: input: convert drv266x to json-schema
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• Re: [PATCH v5 0/8] iio: new DMABUF based API, v5
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 7/8] iio: adc: ad9467: convert to backend framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v11 1/2] dt-bindings: adc: add AD7173
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 6/8] iio: add the IIO backend framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: hmc425a: add entry for LTC6373
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 7/8] iio: buffer-dmaengine: Support new DMABUF based userspace API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/8] dt-bindings: adc: axi-adc: deprecate 'adi,adc-dev'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 5/8] iio: core: Add new DMABUF interface infrastructure
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/8] dt-bindings: adc: ad9467: add new io-backend property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: amplifiers: hmc425a: add support for LTC6373 Instrumentation Amplifier
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: dac: driver for MCP4821
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• Re: [PATCH] iio: pressure: bmp280: Add missing bmp085 to SPI id table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: dac: driver for MCP4821
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 11/11] MAINTAINERS: Add MAINTAINERS entry for AD7091R
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 00/11] Add support for AD7091R-2/-4/-8
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: light: vcnl4000: Set ps high definition for 4040/4200
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• Re: [PATCH v5 0/8] iio: new DMABUF based API, v5
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 8/8] Documentation: iio: Document high-speed DMABUF based API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 7/8] iio: buffer-dmaengine: Support new DMABUF based userspace API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 6/8] iio: buffer-dma: Enable support for DMABUFs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/8] dmaengine: Add API function dmaengine_prep_slave_dma_vec()
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/8] dmaengine: Add API function dmaengine_prep_slave_dma_vec()
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v5 5/8] iio: core: Add new DMABUF interface infrastructure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/8] dmaengine: Add API function dmaengine_prep_slave_dma_vec()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 3/3] iio: amplifiers: hmc425a: add support for LTC6373 Instrumentation Amplifier
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• [PATCH 2/3] iio: amplifiers: hmc425a: move conversion logic
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• [PATCH 1/3] dt-bindings: iio: hmc425a: add entry for LTC6373
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• [PATCH 0/3] Add support for LTC6373
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH v5 2/8] iio: buffer-dma: split iio_dma_buffer_fileio_free() function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/8] iio: buffer-dma: Get rid of outgoing queue
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: pressure: honeywell,mprls0025pa
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 1/4] of: Add cleanup.h based autorelease via __free(device_node) markings.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: buffer: Use IIO_SEPARATE instead of a hard-coded 0
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] Added tilt interrupt support in inv_icm42600
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2 1/3] dt-bindings: iio: adc: Add QCOM PMIC5 Gen3 ADC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 06/11] iio: adc: Add QCOM PMIC5 Gen3 ADC bindings
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH V2 1/3] dt-bindings: iio: adc: Add QCOM PMIC5 Gen3 ADC bindings
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [RFC PATCH 1/4] of: Add cleanup.h based autorelease via __free(device_node) markings.
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: pressure: bmp280: Add missing bmp085 to SPI id table
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: pressure: bmp280: Add missing bmp085 to SPI id table
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio: pressure: bmp280: Add missing bmp085 to SPI id table
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PULL] IIO: First set of new device support etc for 6.8
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: pressure: honeywell,mprls0025pa
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/8] dt-bindings: adc: ad9467: add new io-backend property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH -next] tools/counter: Remove unneeded semicolon
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH][next] tools/counter: Fix spelling mistake "componend" -> "component"
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH -next] tools/counter: Remove unneeded semicolon
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH][next] tools/counter: Fix spelling mistake "componend" -> "component"
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v4 3/8] driver: core: allow modifying device_links flags
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v4 5/8] iio: buffer-dmaengine: export buffer alloc and free functions
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v4 7/8] iio: adc: ad9467: convert to backend framework
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v4 1/8] dt-bindings: adc: ad9467: add new io-backend property
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v4 6/8] iio: add the IIO backend framework
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v4 8/8] iio: adc: adi-axi-adc: move to backend framework
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v4 2/8] dt-bindings: adc: axi-adc: deprecate 'adi,adc-dev'
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v4 0/8] iio: add new backend framework
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v4 4/8] of: property: add device link support for io-backends
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: hid-sensor-als: Add light chromaticity support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: hid-sensor-als: Allocate channels dynamically
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v5 2/2] iio: dac: driver for MCP4821
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: iio: dac: add MCP4821
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: pressure: honeywell,mprls0025pa
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: pressure: change driver for Honeywell MPR series
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] HID: sensor-hub: Enable hid core report processing for all devices
  • From: Yauhen Kharuzhy <jekhor@xxxxxxxxx>
• [PATCH v3 10/10] counter: stm32-timer-cnt: add support for capture events
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PULL] IIO: First set of new device support etc for 6.8
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 05/10] counter: stm32-timer-cnt: add counter prescaler extension
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v3 09/10] counter: stm32-timer-cnt: add support for overflow events
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v3 07/10] counter: stm32-timer-cnt: introduce channels
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v3 08/10] counter: stm32-timer-cnt: probe number of channels from registers
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v3 06/10] counter: stm32-timer-cnt: add checks on quadrature encoder capability
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v3 04/10] counter: stm32-timer-cnt: introduce clock signal
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v3 03/10] counter: stm32-timer-cnt: adopt signal definitions
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v3 00/10] counter: Add stm32 timer events support
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v3 01/10] counter: stm32-timer-cnt: rename quadrature signal
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v3 02/10] counter: stm32-timer-cnt: rename counter
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH v3 0/8] iio: add new backend framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] HID: sensor-hub: Enable hid core report processing for all devices
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: dac: driver for MCP4821
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: bmi088: add i2c support for bmi088 accel driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: dac: driver for MCP4821
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: dac: driver for MCP4821
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/8] iio: add new backend framework
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 09/15] iio: adc: ad7091r: Enable internal vref if external vref is not supplied
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] Added tilt interrupt support in inv_icm42600
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: ti-ads1298: Add driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: ti-ads1298: Add driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: iio: dac: add MCP4821
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 1/2] dt-bindings: adc: add AD7173
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] Added tilt interrupt support in inv_icm42600
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: ti-ads1298: Add driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH v11 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• [PATCH v11 1/2] dt-bindings: adc: add AD7173
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: ti-ads1298: Add driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH -next] tools/counter: Remove unneeded semicolon
  • From: Yang Li <yang.lee@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] iio: sx9324: avoid copying property strings
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH] HID: sensor-hub: Enable hid core report processing for all devices
  • From: Yauhen Kharuzhy <jekhor@xxxxxxxxx>
• [PATCH v4] iio: sx9324: avoid copying property strings
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• [PATCH v5 11/11] MAINTAINERS: Add MAINTAINERS entry for AD7091R
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v5 10/11] iio: adc: Add support for AD7091R-8
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v5 09/11] dt-bindings: iio: Add AD7091R-8
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v5 08/11] iio: adc: Split AD7091R-5 config symbol
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v5 07/11] iio: adc: ad7091r: Add chip_info callback to get conversion result channel
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v5 06/11] iio: adc: ad7091r: Set device mode through chip_info callback
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v5 05/11] iio: adc: ad7091r: Remove unneeded probe parameters
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v5 04/11] iio: adc: ad7091r: Move chip init data to container struct
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v5 03/11] iio: adc: ad7091r: Move generic AD7091R code to base driver and header file
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v5 02/11] iio: adc: ad7091r: Enable internal vref if external vref is not supplied
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v5 01/11] iio: adc: ad7091r: Allow users to configure device events
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v5 00/11] Add support for AD7091R-2/-4/-8
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v5 8/8] Documentation: iio: Document high-speed DMABUF based API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 7/8] iio: buffer-dmaengine: Support new DMABUF based userspace API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 6/8] iio: buffer-dma: Enable support for DMABUFs
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 5/8] iio: core: Add new DMABUF interface infrastructure
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 4/8] dmaengine: dma-axi-dmac: Implement device_prep_slave_dma_vec
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 3/8] dmaengine: Add API function dmaengine_prep_slave_dma_vec()
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 2/8] iio: buffer-dma: split iio_dma_buffer_fileio_free() function
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 1/8] iio: buffer-dma: Get rid of outgoing queue
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 0/8] iio: new DMABUF based API, v5
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: pressure: change driver for Honeywell MPR series
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: pressure: change driver for Honeywell MPR series
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2] iio: accel: bmi088: add i2c support for bmi088 accel driver
  • From: Jun Yan <jerrysteve1101@xxxxxxxxx>
• [PATCH][next] tools/counter: Fix spelling mistake "componend" -> "component"
  • From: Colin Ian King <colin.i.king@xxxxxxxxx>
• [PATCH 2/2] iio: pressure: change driver for Honeywell MPR series
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: pressure: honeywell,mprls0025pa
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH 0/2] iio: pressure: changes to mprls0025pa
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• Re: [PATCH v10 1/2] dt-bindings: adc: add AD7173
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v10 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• [PATCH v10 1/2] dt-bindings: adc: add AD7173
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• [PATCH v4 2/2] iio: dac: driver for MCP4821
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: iio: dac: add MCP4821
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: dac: add MCP4821
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: dac: add MCP4821
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: dac: add MCP4821
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 0/2] Fix regression in ALS
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: accel: bmi088: add i2c support for bmi088 accel driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] iio: accel: bmi088: add i2c support for bmi088 accel driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2 3/3] iio: hid-sensor-als: Add light chromaticity support
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v2 2/3] iio: hid-sensor-als: Add light color temperature support
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v2 1/3] iio: hid-sensor-als: Allocate channels dynamically
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v2 0/3] Add support of color temperature and chromaticity
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: vcnl4000: Add ps high definition for vcnl4040
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/8] iio: add new backend framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/6] counter: stm32-timer-cnt: populate capture channels and check encoder
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v4 09/15] iio: adc: ad7091r: Enable internal vref if external vref is not supplied
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v4 09/15] iio: adc: ad7091r: Enable internal vref if external vref is not supplied
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v4 03/15] iio: adc: ad7091r: Set alert bit in config register
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v3 2/2] iio: dac: driver for MCP4821
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: dac: add MCP4821
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• Re: [PATCH 0/2] Fix regression in ALS
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: vcnl4000: Add ps high definition for vcnl4040
  • From: Mårten Lindahl <martenli@xxxxxxxx>
• [PATCH] iio: accel: bmi088: add i2c support for bmi088 accel driver
  • From: Jun Yan <jerrysteve1101@xxxxxxxxx>
• Re: [PATCH 2/2] iio: light: vcnl4000: Add ps high definition for vcnl4040
  • From: Mårten Lindahl <martenli@xxxxxxxx>
• Re: [PATCH 0/2] Introduce new iio resolution standard attribute
  • From: Mårten Lindahl <martenli@xxxxxxxx>
• Re: [PATCH v4 0/2] tools: counter: add counter_watch_events
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH 0/2] Fix regression in ALS
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: light: isl76682: Add ISL76682 driver
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v1] treewide, serdev: change receive_buf() return type to size_t
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 0/8] iio: add new backend framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: dac: add MCP4821
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: dac: add MCP4821
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [RFC PATCH V2 00/10] IIO: Use the new cleanup.h magic
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v8 1/2] dt-bindings: adc: add AD7173
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v4 09/15] iio: adc: ad7091r: Enable internal vref if external vref is not supplied
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v4 15/15] iio: adc: ad7091r: Allow users to configure device events
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v4 15/15] iio: adc: ad7091r: Allow users to configure device events
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v4 15/15] iio: adc: ad7091r: Allow users to configure device events
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 2/2] Revert "iio: hid-sensor-als: Add light color temperature support"
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH 1/2] Revert "iio: hid-sensor-als: Add light chromaticity support"
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH 0/2] Fix regression in ALS
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [RFC PATCH 4/4] iio: adc: rcar-gyroadc: use __free(device_node)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 3/4] iio: adc: fsl-imx25-gcq: Use __free(device_node)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 2/4] of: unittest: Use __free(device_node)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 1/4] of: Add cleanup.h based autorelease via __free(device_node) markings.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 0/4] of: Automate handling of of_node_put()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 2/2] iio: dac: driver for MCP4821
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: dac: add MCP4821
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• [RFC PATCH 10/10] iio: adc: ad7091r-base: Use auto cleanup of locks.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 09/10] iio: adc: ad4130: Use automatic cleanup of locks and direct mode.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 07/10] iio: proximity: sx9324: Use automated cleanup for locks and IIO mode claiming.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 08/10] iio: proximity: sx9310: Use automated cleanup for locks and IIO mode claiming.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 06/10] iio: proximity: sx9360: Use automated cleanup for locks and IIO mode claiming.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 05/10] iio: adc: max1363: Use automatic cleanup for locks and iio mode claiming.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 04/10] iio: imu: bmi323: Use cleanup handling for iio_device_claim_direct_mode()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 02/10] iio: dummy: Use automatic lock and direct mode cleanup.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 03/10] iio: accel: adxl367: Use automated cleanup for locks and iio direct mode.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 01/10] iio: locking: introduce __cleanup() based direct mode claiming infrastructure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH V2 00/10] IIO: Use the new cleanup.h magic
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: buffer: Use IIO_SEPARATE instead of a hard-coded 0
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH] iio: light: hid-sensor-als: Avoid failure for chromaticity support
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 15/15] iio: adc: ad7091r: Allow users to configure device events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 13/15] iio: adc: Add support for AD7091R-8
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 09/15] iio: adc: ad7091r: Enable internal vref if external vref is not supplied
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 05/15] iio: adc: ad7091r: Move generic AD7091R code to base driver and header file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 04/15] iio: adc: ad7091r: Align arguments to function call parenthesis
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 03/15] iio: adc: ad7091r: Set alert bit in config register
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 02/15] iio: adc: ad7091r: Pass iio_dev to event handler
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 01/15] scripts: checkpatch: Add __aligned to the list of attribute notes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 6/15] iio: adc: ad7091r: Move chip init data to container struct
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/3] iio: chemical: add support for Aosong AGS02MA
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor-als: Don't stop probing at non-supported attribute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: hid-sensor-als: Avoid failure for chromaticity support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: bmi088: update comments and Kconfig
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v9 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: vcnl4000: Add ps high definition for vcnl4040
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] Introduce new iio resolution standard attribute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/8] iio: add new backend framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 1/2] dt-bindings: adc: add AD7173
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: sx9324: avoid copying property strings
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v8 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: core: fix memleak in iio_device_register_sysfs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: sx9324: avoid copying property strings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: light: isl76682: Add ISL76682 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 6/15] iio: adc: ad7091r: Move chip init data to container struct
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] iio: sx9324: avoid copying property strings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1] treewide, serdev: change receive_buf() return type to size_t
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 12/15] dt-bindings: iio: Add AD7091R-8
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v4 01/15] scripts: checkpatch: Add __aligned to the list of attribute notes
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH v4 15/15] iio: adc: ad7091r: Allow users to configure device events
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v4 14/15] MAINTAINERS: Add MAINTAINERS entry for AD7091R
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v4 13/15] iio: adc: Add support for AD7091R-8
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v4 12/15] dt-bindings: iio: Add AD7091R-8
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v4 11/15] iio: adc: Split AD7091R-5 config symbol
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v4 10/15] iio: adc: ad7091r: Add chip_info callback to get conversion result channel
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v4 09/15] iio: adc: ad7091r: Enable internal vref if external vref is not supplied
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v4 08/15] iio: adc: ad7091r: Set device mode through chip_info callback
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v4 07/15] iio: adc: ad7091r: Remove unneeded probe parameters
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v4 06/15] iio: adc: ad7091r: Move chip init data to container struct
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v4 05/15] iio: adc: ad7091r: Move generic AD7091R code to base driver and header file
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v4 04/15] iio: adc: ad7091r: Align arguments to function call parenthesis
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v4 03/15] iio: adc: ad7091r: Set alert bit in config register
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v4 02/15] iio: adc: ad7091r: Pass iio_dev to event handler
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v4 01/15] scripts: checkpatch: Add __aligned to the list of attribute notes
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v4 00/15] Add support for AD7091R-2/-4/-8
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor-als: Don't stop probing at non-supported attribute
  • From: Yauhen Kharuzhy <jekhor@xxxxxxxxx>
• [PATCH] iio: hid-sensor-als: Don't stop probing at non-supported attribute
  • From: Yauhen Kharuzhy <jekhor@xxxxxxxxx>
• Re: [PATCH v9 1/2] dt-bindings: adc: add AD7173
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: spi: add spi-rx-bus-channels peripheral property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 0/9] Support light color temperature and chromaticity
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 5/6] counter: stm32-timer-cnt: populate capture channels and check encoder
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH v1] treewide, serdev: change receive_buf() return type to size_t
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [Bug 218223] Ambient light sensor on Framework 13 AMD laptop stops working in Linux 6.7
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v1] treewide, serdev: change receive_buf() return type to size_t
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v5 3/3] iio: chemical: add support for Aosong AGS02MA
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• [PATCH v5 2/3] dt-bindings: iio: chemical: add aosong,ags02ma
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• [PATCH v5 1/3] dt-bindings: vendor-prefixes: add aosong
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• Re: [PATCH] iio: light: hid-sensor-als: Avoid failure for chromaticity support
  • From: Thomas Weißschuh <thomas@xxxxxxxx>
• Re: [PATCH v1] treewide, serdev: change receive_buf() return type to size_t
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [Bug 218223] Ambient light sensor on Framework 13 AMD laptop stops working in Linux 6.7
  • From: bugzilla-daemon@xxxxxxxxxx
• [PATCH] iio: light: hid-sensor-als: Avoid failure for chromaticity support
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v9 1/2] dt-bindings: adc: add AD7173
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 0/8] iio: add new backend framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v1] treewide, serdev: change receive_buf() return type to size_t
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] treewide, serdev: change receive_buf() return type to size_t
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH v1] treewide, serdev: change receive_buf() return type to size_t
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH v1] treewide, serdev: change receive_buf() return type to size_t
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v1] treewide, serdev: change receive_buf() return type to size_t
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v9 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• [PATCH v9 1/2] dt-bindings: adc: add AD7173
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH v1] treewide, serdev: change receive_buf() return type to size_t
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] iio: light: vcnl4000: Add ps high definition for vcnl4040
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• [PATCH 0/2] Introduce new iio resolution standard attribute
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• [PATCH 1/2] iio: core: Introduce resolution standard attribute
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• Re: [PATCH v4 2/2] iio: light: isl76682: Add ISL76682 driver
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 3/3] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: iio: adc: Add binding for AD7380 ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 0/3] iio: adc: add new ad7380 driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: spi: add spi-rx-bus-channels peripheral property
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 0/9] Support light color temperature and chromaticity
  • From: "Linux regression tracking (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/8] dt-bindings: adc: ad9467: add new io-backend property
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v1] treewide, serdev: change receive_buf() return type to size_t
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH v3 1/8] dt-bindings: adc: ad9467: add new io-backend property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 0/8] iio: add new backend framework
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 1/2] dt-bindings: adc: add AD7173
  • From: Ceclan Dumitru <mitrutzceclan@xxxxxxxxx>
• [PATCH v1] treewide, serdev: change receive_buf() return type to size_t
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH v8 1/2] dt-bindings: adc: add AD7173
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 0/8] iio: add new backend framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 3/3] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v8 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• [PATCH] iio: accel: bmi088: update comments and Kconfig
  • From: Jun Yan <jerrysteve1101@xxxxxxxxx>
• Re: [PATCH v3 0/8] iio: add new backend framework
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Ceclan Dumitru <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH v8 1/2] dt-bindings: adc: add AD7173
  • From: Ceclan Dumitru <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH v2 3/3] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v8 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 1/8] dt-bindings: adc: ad9467: add new io-backend property
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 2/2] iio: spi-dac: Add driver for SPI shift register DACs
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: ti-ads1298: Add driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ti-ads1298: Add driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v8 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Ceclan Dumitru <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH v2 3/3] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: ti-ads1298: Add driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3] iio: sx9324: avoid copying property strings
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 1/8] dt-bindings: adc: ad9467: add new io-backend property
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v4 1/2] tools/counter: add a flexible watch events tool
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v4 2/2] MAINTAINERS: add myself as counter watch events tool maintainer
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v4 0/2] tools: counter: add counter_watch_events
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: ti-ads1298: Add driver
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: adc: Add binding for AD7380 ADCs
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: adc: Add binding for AD7380 ADCs
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: adc: Add binding for AD7380 ADCs
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v3 7/8] iio: adc: ad9467: convert to backend framework
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v3 6/8] iio: add the IIO backend framework
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v3 8/8] iio: adc: adi-axi-adc: move to backend framework
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v3 4/8] of: property: add device link support for io-backends
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v3 5/8] iio: buffer-dmaengine: export buffer alloc and free functions
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v3 1/8] dt-bindings: adc: ad9467: add new io-backend property
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v3 3/8] driver: core: allow modifying device_links flags
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v3 0/8] iio: add new backend framework
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v3 2/8] dt-bindings: adc: axi-adc: deprecate 'adi,adc-dev'
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ti-ads1298: Add driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: spi-dac: Add driver for SPI shift register DACs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 2/2] iio: spi-dac: Add driver for SPI shift register DACs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 3/3] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: spi-dac: Add driver for SPI shift register DACs
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH v2 3/3] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v2 3/3] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: iio: adc: Add binding for AD7380 ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: spi: add spi-rx-bus-channels peripheral property
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 0/3] iio: adc: add new ad7380 driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: spi-dac: Add driver for SPI shift register DACs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: spi-dac: Add driver for SPI shift register DACs
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 2/2] iio: adc: ti-ads1298: Add driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: adc: ti-ads1298: Add driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH 2/2] iio: spi-dac: Add driver for SPI shift register DACs
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: spi-dac: Add driver for SPI shift register DACs
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v5 01/37] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2] iio: sx9324: avoid copying property strings
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v3] iio: sx9324: avoid copying property strings
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v8 12/13] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 13/13] ARM: dts: stm32: put ETZPC as an access controller for STM32MP13x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 10/13] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 11/13] ARM: dts: stm32: put ETZPC as an access controller for STM32MP15x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 08/13] arm64: dts: st: add RIFSC as an access controller for STM32MP25x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 09/13] bus: etzpc: introduce ETZPC firewall controller driver
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 05/13] firewall: introduce stm32_firewall framework
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 07/13] bus: rifsc: introduce RIFSC firewall controller driver
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 04/13] dt-bindings: bus: document ETZPC
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 06/13] of: property: fw_devlink: Add support for "access-controller"
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 02/13] dt-bindings: treewide: add access-controllers description
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 03/13] dt-bindings: bus: document RIFSC
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 00/13] Introduce STM32 Firewall framework
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 01/13] dt-bindings: document generic access controllers
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v8 1/2] dt-bindings: adc: add AD7173
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 8/8] iio: adc: adi-axi-adc: convert to regmap
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v8 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• [PATCH v8 1/2] dt-bindings: adc: add AD7173
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• Re: [PULL] 1st set of IIO fixes for 6.7
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] iio: sx9324: avoid copying property strings
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v2] iio: sx9324: avoid copying property strings
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• [PATCH v3] iio: sx9324: avoid copying property strings
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• Re: [PATCH v6 0/4] iio: humidity: Add driver for ti HDC302x humidity sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] 1st set of IIO fixes for 6.7
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 8/8] iio: adc: adi-axi-adc: convert to regmap
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 00/13] Introduce STM32 Firewall framework
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 13/13] ARM: dts: stm32: put ETZPC as an access controller for STM32MP13x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 12/13] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 10/13] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 11/13] ARM: dts: stm32: put ETZPC as an access controller for STM32MP15x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 08/13] arm64: dts: st: add RIFSC as an access controller for STM32MP25x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 09/13] bus: etzpc: introduce ETZPC firewall controller driver
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 05/13] firewall: introduce stm32_firewall framework
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 07/13] bus: rifsc: introduce RIFSC firewall controller driver
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 04/13] dt-bindings: bus: document ETZPC
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 06/13] of: property: fw_devlink: Add support for "access-controller"
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 02/13] dt-bindings: treewide: add access-controllers description
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 00/13] Introduce STM32 Firewall framework
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 01/13] dt-bindings: document generic access controllers
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 03/13] dt-bindings: bus: document RIFSC
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH v6 4/4] dt-bindings: iio: humidity: Add TI HDC302x support
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 2/2] MAINTAINERS: add myself as counter watch events tool maintainer
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v3 2/2] MAINTAINERS: add myself as counter watch events tool maintainer
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] tools/counter: add a flexible watch events tool
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] MAINTAINERS: add myself as counter watch events tool maintainer
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v3 1/2] tools/counter: add a flexible watch events tool
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v8 2/2] iio: pressure: driver for Honeywell HSC/SSC series
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 8/8] iio: adc: adi-axi-adc: convert to regmap
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v6 4/4] dt-bindings: iio: humidity: Add TI HDC302x support
  • From: Li peiyu <579lpy@xxxxxxxxx>
• [PATCH v6 3/4] iio: humidity: Add driver for ti HDC302x humidity sensors
  • From: Li peiyu <579lpy@xxxxxxxxx>
• [PATCH v6 2/4] iio: ABI: document temperature and humidity peak/trough raw attributes
  • From: Li peiyu <579lpy@xxxxxxxxx>
• [PATCH v6 1/4] iio: core: introduce trough info element for minimum values
  • From: Li peiyu <579lpy@xxxxxxxxx>
• [PATCH v6 0/4] iio: humidity: Add driver for ti HDC302x humidity sensors
  • From: Li peiyu <579lpy@xxxxxxxxx>
• Re: [PATCH v4 4/4] iio: humidity: Add TI HDC302x support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 4/4] iio: humidity: Add TI HDC302x support
  • From: peiyu li <579lpy@xxxxxxxxx>
• Re: [PATCH v2 5/8] iio: buffer-dmaengine: export buffer alloc and free functions
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 4/8] iio: adc: ad9467: fix scale setting
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 0/8] iio: ad9467 and axi-adc cleanups
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: Add binding for AD7380 ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 12/13] iio: adc: Add support for AD7091R-8
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH] doc: iio: Document intensity scale as poorly defined
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2 6/8] iio: add the IIO backend framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/8] iio: buffer-dmaengine: export buffer alloc and free functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/8] driver: core: allow modifying device_links flags
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/4] iio: humidity: Add driver for ti HDC302x humidity sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/8] iio: add new backend framework
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: Add binding for AD7380 ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] iio: adc: mcp3911: simplify code with guard macro
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: light: driver for Lite-On ltr390
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: core: fix memleak in iio_device_register_sysfs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: isl76682: remove unreachable code
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 07/13] iio: adc: ad7091r: Set device mode through chip_info callback
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 12/13] iio: adc: Add support for AD7091R-8
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 10/13] dt-bindings: iio: Add AD7091R-8
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 08/13] iio: adc: ad7091r: Enable internal vref if external vref is not supplied
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 2/2] iio: pressure: driver for Honeywell HSC/SSC series
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 03/13] iio: adc: ad7091r: Set alert bit in config register
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] doc: iio: Document intensity scale as poorly defined
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: temperature: mlx90635 MLX90635 IR Temperature sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/8] iio: ad9467 and axi-adc cleanups
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] iio: adc: mcp3911: simplify code with guard macro
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/8] iio: adc: ad9467: fix scale setting
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] Added tilt interrupt support in inv_icm42600
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/9] Support light color temperature and chromaticity
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 4/4] dt-bindings: iio: humidity: Add TI HDC302x support
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: temperature: Add AMS AS6200
  • From: Abdel Alkuor <alkuor@xxxxxxxxx>
• Re: [PATCH v2 2/8] dt-bindings: adc: axi-adc: deprecate 'adi,adc-dev'
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 1/8] dt-bindings: adc: ad9467: document io-backend property
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 0/8] iio: add new backend framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v5 4/4] dt-bindings: iio: humidity: Add TI HDC302x support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v5 4/4] dt-bindings: iio: humidity: Add TI HDC302x support
  • From: Li peiyu <579lpy@xxxxxxxxx>
• [PATCH v5 3/4] iio: humidity: Add driver for ti HDC302x humidity sensors
  • From: Li peiyu <579lpy@xxxxxxxxx>
• [PATCH v5 2/4] iio: ABI: document temperature and humidity peak/trough raw attributes
  • From: Li peiyu <579lpy@xxxxxxxxx>
• [PATCH v5 1/4] iio: core: introduce trough info element for minimum values
  • From: Li peiyu <579lpy@xxxxxxxxx>
• [PATCH v5 0/4] iio: humidity: Add driver for ti HDC302x humidity sensors
  • From: Li peiyu <579lpy@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: Add binding for AD7380 ADCs
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 1/8] dt-bindings: adc: ad9467: document io-backend property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/8] dt-bindings: adc: axi-adc: deprecate 'adi,adc-dev'
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3] Added tilt interrupt support in inv_icm42600
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• [PATCH 2/2] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: adc: Add binding for AD7380 ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 0/2] iio: adc: add new ad7380 driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 0/8] iio: add new backend framework
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v2 5/8] iio: buffer-dmaengine: export buffer alloc and free functions
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v2 8/8] iio: adc: adi-axi-adc: move to backend framework
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v2 7/8] iio: adc: ad9467: convert to backend framework
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v2 6/8] iio: add the IIO backend framework
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v2 3/8] driver: core: allow modifying device_links flags
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v2 4/8] of: property: add device link support for io-backends
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v2 2/8] dt-bindings: adc: axi-adc: deprecate 'adi,adc-dev'
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v2 0/8] iio: add new backend framework
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v2 1/8] dt-bindings: adc: ad9467: document io-backend property
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• Re: [PATCH v3 10/13] dt-bindings: iio: Add AD7091R-8
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 00/13] Add support for AD7091R-2/-4/-8
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v3 10/13] dt-bindings: iio: Add AD7091R-8
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v3 10/13] dt-bindings: iio: Add AD7091R-8
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v3 6/13] iio: adc: ad7091r: Move chip init data to container struct
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 01/13] scripts: checkpatch: Add __aligned to the list of attribute notes
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v3 02/13] iio: adc: ad7091r: Populate device driver data field
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v3 13/13] MAINTAINERS: Add MAINTAINERS entry for AD7091R
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v3 2/2] iio: light: driver for Lite-On ltr390
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: light: add ltr390
  • From: Anshul Dalal <anshulusr@xxxxxxxxx>
• Re: [PATCH v3 10/13] dt-bindings: iio: Add AD7091R-8
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] iio: core: fix memleak in iio_device_register_sysfs
  • From: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
• Re: (subset) [PATCH v4 0/6] support oneplus-lemonade(p) devices
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [PATCH] iio: light: isl76682: remove unreachable code
  • From: Jiapeng Chong <jiapeng.chong@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 10/13] dt-bindings: iio: Add AD7091R-8
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 00/13] Add support for AD7091R-2/-4/-8
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 02/13] iio: adc: ad7091r: Populate device driver data field
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 01/13] scripts: checkpatch: Add __aligned to the list of attribute notes
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v3 13/13] MAINTAINERS: Add MAINTAINERS entry for AD7091R
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH v3 13/13] MAINTAINERS: Add MAINTAINERS entry for AD7091R
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v3 12/13] iio: adc: Add support for AD7091R-8
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v3 11/13] iio: adc: Split AD7091R-5 config symbol
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v3 10/13] dt-bindings: iio: Add AD7091R-8
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v3 09/13] iio: adc: ad7091r: Add chip_info callback to get conversion result channel
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v3 08/13] iio: adc: ad7091r: Enable internal vref if external vref is not supplied
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v3 07/13] iio: adc: ad7091r: Set device mode through chip_info callback
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v3 06/13] iio: adc: ad7091r: Move chip init data to container struct
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v3 05/13] iio: adc: ad7091r: Move generic AD7091R code to base driver and header file
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v3 04/13] iio: adc: ad7091r: Align arguments to function call parenthesis
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v3 03/13] iio: adc: ad7091r: Set alert bit in config register
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v3 02/13] iio: adc: ad7091r: Populate device driver data field
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v3 01/13] scripts: checkpatch: Add __aligned to the list of attribute notes
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v3 00/13] Add support for AD7091R-2/-4/-8
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• Re: [PATCH v8 2/2] iio: pressure: driver for Honeywell HSC/SSC series
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v8 2/2] iio: pressure: driver for Honeywell HSC/SSC series
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v8 1/2] dt-bindings: iio: pressure: add honeywell,hsc030
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/8] iio: adc: ad9467: fix scale setting
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 3/8] iio: adc: ad9467: add mutex to struct ad9467_state
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH] doc: iio: Document intensity scale as poorly defined
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v6 2/2] iio: light: isl76682: Add ISL76682 driver
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v2 5/8] iio: adc: ad9467: use spi_get_device_match_data()
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>