Based on upstream master with the previous patches of this series applied
as well.
IMPORTANT NOTE: There is a fix queued up for this driver here [1]. It is going
to conflict with PATCH [7-9/9]. The previous patches should be fine. The
solution should be quite trivial with minor changes in all 3 PATCH [7-9/9].
When it is deemed necessary I can resubmit the patches or help with resolving
the issue.
Changes in v6:
PATCH [1-3/9]: new:
- split of PATCH [5/10] of v5 according to proposal here [2].
PATCH [4/9]: new:
- split of PATCH [6/10] of v5 according to proposal here [3].
PATCH [6/9]:
- Removed mutex_lock() and added guard(mutex) to
bmp580_nvmem_{read/write}() functions as well.
PATCH [9/9]:
- In the buffer handlers, add 'goto out;' instead of just returning the
error because iio_trigger_notify_done() wouldn't be called in case of
error.
[1]: https://lore.kernel.org/linux-iio/043f2be49df3c11152aaf32fc5467ed43fd59faa.camel@xxxxxxxxx/
[2]: https://lore.kernel.org/linux-iio/20240505200818.1e70c664@jic23-huawei/
[3]: https://lore.kernel.org/linux-iio/20240505202106.1c780044@jic23-huawei/
Vasileios Amoiridis (9):
iio: pressure: bmp280: Remove dead error checks
iio: pressure: bmp280: Remove, add and update error messages
iio: pressure: bmp280: Make error checks consistent
iio: pressure: bmp280: Use unsigned data types for raw sensor data
iio: pressure: bmp280: Refactorize reading functions
iio: pressure: bmp280: Introduce new cleanup routines
iio: pressure: bmp280: Generalize read_{temp,press,humid}() functions
iio: pressure: bmp280: Add SCALE, RAW values in channels and
refactorize them
iio: pressure: bmp280: Add triggered buffer support
drivers/iio/pressure/Kconfig | 2 +
drivers/iio/pressure/bmp280-core.c | 1130 ++++++++++++++++++++--------
drivers/iio/pressure/bmp280-spi.c | 8 +-
drivers/iio/pressure/bmp280.h | 34 +-
4 files changed, 844 insertions(+), 330 deletions(-)
base-commit: dccb07f2914cdab2ac3a5b6c98406f765acab803
--
2.25.1
