Re: [PATCH 1/2] dt-bindings: iio: dac: add docs for ad8460

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 10 May 2024 14:40:52 +0800, Mariel Tinaco wrote:
> This adds the bindings documentation for the 14-bit
> High Voltage, High Current, Waveform Generator
> Digital-to-Analog converter.
> 
> Signed-off-by: Mariel Tinaco <Mariel.Tinaco@xxxxxxxxxx>
> ---
>  .../bindings/iio/dac/adi,ad8460.yaml          | 67 +++++++++++++++++++
>  MAINTAINERS                                   |  7 ++
>  2 files changed, 74 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/iio/dac/adi,ad8460.example.dts:22.17-27: Warning (reg_format): /example-0/spi/dac@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/iio/dac/adi,ad8460.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/dac/adi,ad8460.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/dac/adi,ad8460.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/dac/adi,ad8460.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/dac/adi,ad8460.example.dts:19.13-29.11: Warning (spi_bus_bridge): /example-0/spi: incorrect #address-cells for SPI bus
Documentation/devicetree/bindings/iio/dac/adi,ad8460.example.dts:19.13-29.11: Warning (spi_bus_bridge): /example-0/spi: incorrect #size-cells for SPI bus
Documentation/devicetree/bindings/iio/dac/adi,ad8460.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/dac/adi,ad8460.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge'
Documentation/devicetree/bindings/iio/dac/adi,ad8460.example.dts:20.19-28.15: Warning (avoid_default_addr_size): /example-0/spi/dac@0: Relying on default #address-cells value
Documentation/devicetree/bindings/iio/dac/adi,ad8460.example.dts:20.19-28.15: Warning (avoid_default_addr_size): /example-0/spi/dac@0: Relying on default #size-cells value
Documentation/devicetree/bindings/iio/dac/adi,ad8460.example.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size'

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240510064053.278257-2-Mariel.Tinaco@xxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux