On Sun, 7 Apr 2024 19:29:16 +0200
Vasileios Amoiridis <vassilisamir@xxxxxxxxx> wrote:
> For BMP18x, BMP28x, BME280, BMP38x the reading of the pressure
> value requires an update of the t_fine variable which happens
> through reading the temperature value.
>
> So all the bmpxxx_read_press() functions of the above sensors
> are internally calling the equivalent bmpxxx_read_temp() function
> in order to update the t_fine value. By just looking at the code
> this functionality is a bit hidden and is not easy to understand
> why those channels are not independent.
>
> This commit tries to clear these things a bit by splitting the
> bmpxxx_{read/compensate}_{temp/press/humid}() to the following:
>
> i. bmpxxx_read_{temp/press/humid}_adc(): read the raw value from
> the sensor.
>
> ii. bmpxx_calc_t_fine(): calculate the t_fine variable.
>
> iii. bmpxxx_get_t_fine(): get the t_fine variable.
>
> iv. bmpxxx_compensate_{temp/press/humid}(): compensate the adc
> values and return the calculated value.
>
> v. bmpxxx_read_{temp/press/humid}(): combine calls of the
> aforementioned functions to return the requested value.
>
> Suggested-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> Signed-off-by: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
Looks good to me. Thanks for tidying this up.
