Refactor driver by splitting the code into core and i2c. Seemingly redundant read/write function parameters are required for compatibility with the SPI driver. Signed-off-by: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx> Signed-off-by: Andreas Klinger <ak@xxxxxxxxxxxxx> --- MAINTAINERS | 3 +- drivers/iio/pressure/Kconfig | 6 + drivers/iio/pressure/Makefile | 1 + drivers/iio/pressure/mprls0025pa.c | 203 ++++++++----------------- drivers/iio/pressure/mprls0025pa.h | 100 ++++++++++++ drivers/iio/pressure/mprls0025pa_i2c.c | 98 ++++++++++++ 6 files changed, 267 insertions(+), 144 deletions(-) create mode 100644 drivers/iio/pressure/mprls0025pa.h create mode 100644 drivers/iio/pressure/mprls0025pa_i2c.c diff --git a/MAINTAINERS b/MAINTAINERS index 3029841e92a8..cbb163e1b311 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9725,10 +9725,11 @@ F: drivers/iio/pressure/hsc030pa* HONEYWELL MPRLS0025PA PRESSURE SENSOR SERIES IIO DRIVER M: Andreas Klinger <ak@xxxxxxxxxxxxx> +M: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx> L: linux-iio@xxxxxxxxxxxxxxx S: Maintained F: Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml -F: drivers/iio/pressure/mprls0025pa.c +F: drivers/iio/pressure/mprls0025pa* HOST AP DRIVER L: linux-wireless@xxxxxxxxxxxxxxx diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index 79adfd059c3a..f03007cfec85 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -182,6 +182,7 @@ config MPL3115 config MPRLS0025PA tristate "Honeywell MPRLS0025PA (MicroPressure sensors series)" depends on I2C + select MPRLS0025PA_I2C if I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help @@ -192,6 +193,11 @@ config MPRLS0025PA To compile this driver as a module, choose M here: the module will be called mprls0025pa. +config MPRLS0025PA_I2C + tristate + depends on MPRLS0025PA + depends on I2C + config MS5611 tristate "Measurement Specialties MS5611 pressure sensor driver" select IIO_BUFFER diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile index b0f8b94662f2..7754135e190c 100644 --- a/drivers/iio/pressure/Makefile +++ b/drivers/iio/pressure/Makefile @@ -24,6 +24,7 @@ obj-$(CONFIG_MPL115_I2C) += mpl115_i2c.o obj-$(CONFIG_MPL115_SPI) += mpl115_spi.o obj-$(CONFIG_MPL3115) += mpl3115.o obj-$(CONFIG_MPRLS0025PA) += mprls0025pa.o +obj-$(CONFIG_MPRLS0025PA_I2C) += mprls0025pa_i2c.o obj-$(CONFIG_MS5611) += ms5611_core.o obj-$(CONFIG_MS5611_I2C) += ms5611_i2c.o obj-$(CONFIG_MS5611_SPI) += ms5611_spi.o diff --git a/drivers/iio/pressure/mprls0025pa.c b/drivers/iio/pressure/mprls0025pa.c index e14cdee7989f..cb5d6c0cca7e 100644 --- a/drivers/iio/pressure/mprls0025pa.c +++ b/drivers/iio/pressure/mprls0025pa.c @@ -7,12 +7,11 @@ * Data sheet: * https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/micropressure-mpr-series/documents/sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf * - * 7-bit I2C default slave address: 0x18 */ -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/i2c.h> +#include <linux/array_size.h> +#include <linux/bitfield.h> +#include <linux/bits.h> #include <linux/math64.h> #include <linux/mod_devicetable.h> #include <linux/module.h> @@ -30,13 +29,15 @@ #include <asm/unaligned.h> -/* bits in i2c status byte */ -#define MPR_I2C_POWER BIT(6) /* device is powered */ -#define MPR_I2C_BUSY BIT(5) /* device is busy */ -#define MPR_I2C_MEMORY BIT(2) /* integrity test passed */ -#define MPR_I2C_MATH BIT(0) /* internal math saturation */ +#include "mprls0025pa.h" -#define MPR_I2C_ERR_FLAG (MPR_I2C_BUSY | MPR_I2C_MEMORY | MPR_I2C_MATH) +/* bits in status byte */ +#define MPR_ST_POWER BIT(6) /* device is powered */ +#define MPR_ST_BUSY BIT(5) /* device is busy */ +#define MPR_ST_MEMORY BIT(2) /* integrity test passed */ +#define MPR_ST_MATH BIT(0) /* internal math saturation */ + +#define MPR_ST_ERR_FLAG (MPR_ST_BUSY | MPR_ST_MEMORY | MPR_ST_MATH) /* * support _RAW sysfs interface: @@ -69,12 +70,6 @@ * transfer function B: 2.5% to 22.5% of 2^24 * transfer function C: 20% to 80% of 2^24 */ -enum mpr_func_id { - MPR_FUNCTION_A, - MPR_FUNCTION_B, - MPR_FUNCTION_C, -}; - struct mpr_func_spec { u32 output_min; u32 output_max; @@ -86,45 +81,6 @@ static const struct mpr_func_spec mpr_func_spec[] = { [MPR_FUNCTION_C] = { .output_min = 3355443, .output_max = 13421773 }, }; -struct mpr_chan { - s32 pres; /* pressure value */ - s64 ts; /* timestamp */ -}; - -struct mpr_data { - struct i2c_client *client; - struct mutex lock; /* - * access to device during read - */ - u32 pmin; /* minimal pressure in pascal */ - u32 pmax; /* maximal pressure in pascal */ - enum mpr_func_id function; /* transfer function */ - u32 outmin; /* - * minimal numerical range raw - * value from sensor - */ - u32 outmax; /* - * maximal numerical range raw - * value from sensor - */ - int scale; /* int part of scale */ - int scale2; /* nano part of scale */ - int offset; /* int part of offset */ - int offset2; /* nano part of offset */ - struct gpio_desc *gpiod_reset; /* reset */ - int irq; /* - * end of conversion irq; - * used to distinguish between - * irq mode and reading in a - * loop until data is ready - */ - struct completion completion; /* handshake from irq to read */ - struct mpr_chan chan; /* - * channel values for buffered - * mode - */ -}; - static const struct iio_chan_spec mpr_channels[] = { { .type = IIO_PRESSURE, @@ -152,11 +108,11 @@ static void mpr_reset(struct mpr_data *data) } /** - * mpr_read_pressure() - Read pressure value from sensor via I2C + * mpr_read_pressure() - Read pressure value from sensor * @data: Pointer to private data struct. * @press: Output value read from sensor. * - * Reading from the sensor by sending and receiving I2C telegrams. + * Reading from the sensor by sending and receiving telegrams. * * If there is an end of conversion (EOC) interrupt registered the function * waits for a maximum of one second for the interrupt. @@ -169,25 +125,17 @@ static void mpr_reset(struct mpr_data *data) */ static int mpr_read_pressure(struct mpr_data *data, s32 *press) { - struct device *dev = &data->client->dev; + struct device *dev = data->dev; int ret, i; - u8 wdata[] = {0xAA, 0x00, 0x00}; - s32 status; int nloops = 10; - u8 buf[4]; reinit_completion(&data->completion); - ret = i2c_master_send(data->client, wdata, sizeof(wdata)); + ret = data->ops->write(data, MPR_CMD_SYNC, MPR_PKT_SYNC_LEN); if (ret < 0) { dev_err(dev, "error while writing ret: %d\n", ret); return ret; } - if (ret != sizeof(wdata)) { - dev_err(dev, "received size doesn't fit - ret: %d / %u\n", ret, - (u32)sizeof(wdata)); - return -EIO; - } if (data->irq > 0) { ret = wait_for_completion_timeout(&data->completion, HZ); @@ -205,14 +153,14 @@ static int mpr_read_pressure(struct mpr_data *data, s32 *press) * quite long */ usleep_range(5000, 10000); - status = i2c_smbus_read_byte(data->client); - if (status < 0) { + ret = data->ops->read(data, MPR_CMD_NOP, 1); + if (ret < 0) { dev_err(dev, "error while reading, status: %d\n", - status); - return status; + ret); + return ret; } - if (!(status & MPR_I2C_ERR_FLAG)) + if (!(data->buffer[0] & MPR_ST_ERR_FLAG)) break; } if (i == nloops) { @@ -221,29 +169,19 @@ static int mpr_read_pressure(struct mpr_data *data, s32 *press) } } - ret = i2c_master_recv(data->client, buf, sizeof(buf)); - if (ret < 0) { - dev_err(dev, "error in i2c_master_recv ret: %d\n", ret); + ret = data->ops->read(data, MPR_CMD_NOP, MPR_PKT_NOP_LEN); + if (ret < 0) return ret; - } - if (ret != sizeof(buf)) { - dev_err(dev, "received size doesn't fit - ret: %d / %u\n", ret, - (u32)sizeof(buf)); - return -EIO; - } - if (buf[0] & MPR_I2C_ERR_FLAG) { - /* - * it should never be the case that status still indicates - * business - */ - dev_err(dev, "data still not ready: %08x\n", buf[0]); + if (data->buffer[0] & MPR_ST_ERR_FLAG) { + dev_err(data->dev, + "unexpected status byte %02x\n", data->buffer[0]); return -ETIMEDOUT; } - *press = get_unaligned_be24(&buf[1]); + *press = get_unaligned_be24(&data->buffer[1]); - dev_dbg(dev, "received: %*ph cnt: %d\n", ret, buf, *press); + dev_dbg(dev, "received: %*ph cnt: %d\n", ret, data->buffer, *press); return 0; } @@ -315,26 +253,22 @@ static const struct iio_info mpr_info = { .read_raw = &mpr_read_raw, }; -static int mpr_probe(struct i2c_client *client) +int mpr_common_probe(struct device *dev, const struct mpr_ops *ops, int irq) { int ret; struct mpr_data *data; struct iio_dev *indio_dev; - struct device *dev = &client->dev; s64 scale, offset; u32 func; - if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE)) - return dev_err_probe(dev, -EOPNOTSUPP, - "I2C functionality not supported\n"); - indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); if (!indio_dev) - return dev_err_probe(dev, -ENOMEM, "couldn't get iio_dev\n"); + return -ENOMEM; data = iio_priv(indio_dev); - data->client = client; - data->irq = client->irq; + data->dev = dev; + data->ops = ops; + data->irq = irq; mutex_init(&data->lock); init_completion(&data->completion); @@ -350,32 +284,36 @@ static int mpr_probe(struct i2c_client *client) return dev_err_probe(dev, ret, "can't get and enable vdd supply\n"); - if (dev_fwnode(dev)) { - ret = device_property_read_u32(dev, "honeywell,pmin-pascal", + ret = data->ops->init(data->dev); + if (ret) + return ret; + + ret = device_property_read_u32(dev, + "honeywell,transfer-function", &func); + if (ret) + return dev_err_probe(dev, ret, + "honeywell,transfer-function could not be read\n"); + data->function = func - 1; + if (data->function > MPR_FUNCTION_C) + return dev_err_probe(dev, -EINVAL, + "honeywell,transfer-function %d invalid\n", + data->function); + + ret = device_property_read_u32(dev, "honeywell,pmin-pascal", &data->pmin); - if (ret) - return dev_err_probe(dev, ret, + if (ret) + return dev_err_probe(dev, ret, "honeywell,pmin-pascal could not be read\n"); - ret = device_property_read_u32(dev, "honeywell,pmax-pascal", - &data->pmax); - if (ret) - return dev_err_probe(dev, ret, + ret = device_property_read_u32(dev, "honeywell,pmax-pascal", + &data->pmax); + if (ret) + return dev_err_probe(dev, ret, "honeywell,pmax-pascal could not be read\n"); - ret = device_property_read_u32(dev, - "honeywell,transfer-function", &func); - if (ret) - return dev_err_probe(dev, ret, - "honeywell,transfer-function could not be read\n"); - data->function = func - 1; - if (data->function > MPR_FUNCTION_C) - return dev_err_probe(dev, -EINVAL, - "honeywell,transfer-function %d invalid\n", - data->function); - } else { + + if (data->pmin >= data->pmax) return dev_err_probe(dev, -EINVAL, - "driver needs to be initialized in the dt\n"); - } + "pressure limits are invalid\n"); data->outmin = mpr_func_spec[data->function].output_min; data->outmax = mpr_func_spec[data->function].output_max; @@ -394,7 +332,7 @@ static int mpr_probe(struct i2c_client *client) if (data->irq > 0) { ret = devm_request_irq(dev, data->irq, mpr_eoc_handler, - IRQF_TRIGGER_RISING, client->name, data); + IRQF_TRIGGER_RISING, dev_name(dev), data); if (ret) return dev_err_probe(dev, ret, "request irq %d failed\n", data->irq); @@ -421,29 +359,8 @@ static int mpr_probe(struct i2c_client *client) return 0; } - -static const struct of_device_id mpr_matches[] = { - { .compatible = "honeywell,mprls0025pa" }, - { } -}; -MODULE_DEVICE_TABLE(of, mpr_matches); - -static const struct i2c_device_id mpr_id[] = { - { "mprls0025pa" }, - { } -}; -MODULE_DEVICE_TABLE(i2c, mpr_id); - -static struct i2c_driver mpr_driver = { - .probe = mpr_probe, - .id_table = mpr_id, - .driver = { - .name = "mprls0025pa", - .of_match_table = mpr_matches, - }, -}; -module_i2c_driver(mpr_driver); +EXPORT_SYMBOL_NS(mpr_common_probe, IIO_HONEYWELL_MPRLS0025PA); MODULE_AUTHOR("Andreas Klinger <ak@xxxxxxxxxxxxx>"); -MODULE_DESCRIPTION("Honeywell MPRLS0025PA I2C driver"); +MODULE_DESCRIPTION("Honeywell MPR pressure sensor core driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/iio/pressure/mprls0025pa.h b/drivers/iio/pressure/mprls0025pa.h new file mode 100644 index 000000000000..7d7bd21bda95 --- /dev/null +++ b/drivers/iio/pressure/mprls0025pa.h @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPRLS0025PA - Honeywell MicroPressure pressure sensor series driver + * + * Copyright (c) Andreas Klinger <ak@xxxxxxxxxxxxx> + * + * Data sheet: + * https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/micropressure-mpr-series/documents/sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf + */ + +#ifndef _MPRLS0025PA_H +#define _MPRLS0025PA_H + +#include <linux/completion.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/mutex.h> +#include <linux/stddef.h> +#include <linux/types.h> + +#define MPR_MEASUREMENT_RD_SIZE 4 +#define MPR_CMD_NOP 0xf0 +#define MPR_CMD_SYNC 0xaa +#define MPR_PKT_NOP_LEN MPR_MEASUREMENT_RD_SIZE +#define MPR_PKT_SYNC_LEN 3 + +struct device; + +struct iio_chan_spec; +struct iio_dev; + +struct mpr_data; +struct mpr_ops; + +/** + * struct mpr_chan + * @pres: pressure value + * @ts: timestamp + */ +struct mpr_chan { + s32 pres; + s64 ts; +}; + +enum mpr_func_id { + MPR_FUNCTION_A, + MPR_FUNCTION_B, + MPR_FUNCTION_C, +}; + +/** + * struct mpr_data + * @dev: current device structure + * @ops: functions that implement the sensor reads/writes, bus init + * @lock: access to device during read + * @pmin: minimal pressure in pascal + * @pmax: maximal pressure in pascal + * @function: transfer function + * @outmin: minimum raw pressure in counts (based on transfer function) + * @outmax: maximum raw pressure in counts (based on transfer function) + * @scale: pressure scale + * @scale2: pressure scale, decimal number + * @offset: pressure offset + * @offset2: pressure offset, decimal number + * @gpiod_reset: reset + * @irq: end of conversion irq. used to distinguish between irq mode and + * reading in a loop until data is ready + * @completion: handshake from irq to read + * @chan: channel values for buffered mode + * @buffer: raw conversion data + */ +struct mpr_data { + struct device *dev; + const struct mpr_ops *ops; + struct mutex lock; + u32 pmin; + u32 pmax; + enum mpr_func_id function; + u32 outmin; + u32 outmax; + int scale; + int scale2; + int offset; + int offset2; + struct gpio_desc *gpiod_reset; + int irq; + struct completion completion; + struct mpr_chan chan; + u8 buffer[MPR_MEASUREMENT_RD_SIZE] __aligned(IIO_DMA_MINALIGN); +}; + +struct mpr_ops { + int (*init)(struct device *); + int (*read)(struct mpr_data *, const u8, const u8); + int (*write)(struct mpr_data *, const u8, const u8); +}; + +int mpr_common_probe(struct device *dev, const struct mpr_ops *ops, int irq); + +#endif diff --git a/drivers/iio/pressure/mprls0025pa_i2c.c b/drivers/iio/pressure/mprls0025pa_i2c.c new file mode 100644 index 000000000000..89d6a206192b --- /dev/null +++ b/drivers/iio/pressure/mprls0025pa_i2c.c @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPRLS0025PA - Honeywell MicroPressure pressure sensor series driver + * + * Copyright (c) Andreas Klinger <ak@xxxxxxxxxxxxx> + * + * Data sheet: + * https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/micropressure-mpr-series/documents/sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf + */ + +#include <linux/errno.h> +#include <linux/i2c.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> + +#include <linux/iio/iio.h> + +#include "mprls0025pa.h" + +static int mpr_i2c_init(struct device *unused) +{ + return 0; +} + +static int mpr_i2c_read(struct mpr_data *data, const u8 unused, const u8 cnt) +{ + int ret; + struct i2c_client *client = to_i2c_client(data->dev); + + if (cnt > MPR_MEASUREMENT_RD_SIZE) + return -EOVERFLOW; + + memset(data->buffer, 0, MPR_MEASUREMENT_RD_SIZE); + ret = i2c_master_recv(client, data->buffer, cnt); + if (ret != cnt) { + return -EIO; + } + + return 0; +} + +static int mpr_i2c_write(struct mpr_data *data, const u8 cmd, const u8 unused) +{ + int ret; + struct i2c_client *client = to_i2c_client(data->dev); + u8 wdata[MPR_PKT_SYNC_LEN]; + + memset(wdata, 0, sizeof(wdata)); + wdata[0] = cmd; + + ret = i2c_master_send(client, wdata, MPR_PKT_SYNC_LEN); + if (ret != MPR_PKT_SYNC_LEN) { + return -EIO; + } + + return 0; +} + +static const struct mpr_ops mpr_i2c_ops = { + .init = mpr_i2c_init, + .read = mpr_i2c_read, + .write = mpr_i2c_write, +}; + +static int mpr_i2c_probe(struct i2c_client *client) +{ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE)) + return -EOPNOTSUPP; + + return mpr_common_probe(&client->dev, &mpr_i2c_ops, client->irq); +} + +static const struct of_device_id mpr_i2c_match[] = { + { .compatible = "honeywell,mprls0025pa" }, + {} +}; +MODULE_DEVICE_TABLE(of, mpr_i2c_match); + +static const struct i2c_device_id mpr_i2c_id[] = { + { "mprls0025pa" }, + {} +}; +MODULE_DEVICE_TABLE(i2c, mpr_i2c_id); + +static struct i2c_driver mpr_i2c_driver = { + .probe = mpr_i2c_probe, + .id_table = mpr_i2c_id, + .driver = { + .name = "mprls0025pa", + .of_match_table = mpr_i2c_match, + }, +}; +module_i2c_driver(mpr_i2c_driver); + +MODULE_AUTHOR("Andreas Klinger <ak@xxxxxxxxxxxxx>"); +MODULE_DESCRIPTION("Honeywell MPR pressure sensor i2c driver"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(IIO_HONEYWELL_MPRLS0025PA); -- 2.41.0
