From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Avoiding unused variable warnings when using this macro adds
complexity that in simple cases like this one is not justified
for the small saving in data.
Switch include to mod_devicetable.h as that contains the only
acpi specific definitions needed in this driver.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
---
drivers/iio/accel/stk8ba50.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/accel/stk8ba50.c b/drivers/iio/accel/stk8ba50.c
index 3415ac1b4495..668edc88c89d 100644
--- a/drivers/iio/accel/stk8ba50.c
+++ b/drivers/iio/accel/stk8ba50.c
@@ -7,11 +7,11 @@
* STK8BA50 7-bit I2C address: 0x18.
*/
-#include <linux/acpi.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/iio/buffer.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
@@ -541,7 +541,7 @@ static struct i2c_driver stk8ba50_driver = {
.driver = {
.name = "stk8ba50",
.pm = pm_sleep_ptr(&stk8ba50_pm_ops),
- .acpi_match_table = ACPI_PTR(stk8ba50_acpi_id),
+ .acpi_match_table = stk8ba50_acpi_id,
},
.probe = stk8ba50_probe,
.remove = stk8ba50_remove,
--
2.43.0
