There are a ton of build errors when REGMAP is not set, so select
REGMAP to fix all of them.
Examples (not all of them):
../drivers/iio/imu/bno055/bno055_ser_core.c:495:15: error: variable 'bno055_ser_regmap_bus' has initializer but incomplete type
495 | static struct regmap_bus bno055_ser_regmap_bus = {
../drivers/iio/imu/bno055/bno055_ser_core.c:496:10: error: 'struct regmap_bus' has no member named 'write'
496 | .write = bno055_ser_write_reg,
../drivers/iio/imu/bno055/bno055_ser_core.c:497:10: error: 'struct regmap_bus' has no member named 'read'
497 | .read = bno055_ser_read_reg,
../drivers/iio/imu/bno055/bno055_ser_core.c: In function 'bno055_ser_probe':
../drivers/iio/imu/bno055/bno055_ser_core.c:532:18: error: implicit declaration of function 'devm_regmap_init'; did you mean 'vmem_map_init'? [-Werror=implicit-function-declaration]
532 | regmap = devm_regmap_init(&serdev->dev, &bno055_ser_regmap_bus,
../drivers/iio/imu/bno055/bno055_ser_core.c:532:16: warning: assignment to 'struct regmap *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
532 | regmap = devm_regmap_init(&serdev->dev, &bno055_ser_regmap_bus,
../drivers/iio/imu/bno055/bno055_ser_core.c: At top level:
../drivers/iio/imu/bno055/bno055_ser_core.c:495:26: error: storage size of 'bno055_ser_regmap_bus' isn't known
495 | static struct regmap_bus bno055_ser_regmap_bus = {
Fixes: 2eef5a9cc643 ("iio: imu: add BNO055 serdev driver")
Signed-off-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
Cc: Andrea Merello <andrea.merello@xxxxxx>
Cc: Jonathan Cameron <jic23@xxxxxxxxxx>
Cc: Lars-Peter Clausen <lars@xxxxxxxxxx>
Cc: linux-iio@xxxxxxxxxxxxxxx
---
drivers/iio/imu/bno055/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff -- a/drivers/iio/imu/bno055/Kconfig b/drivers/iio/imu/bno055/Kconfig
--- a/drivers/iio/imu/bno055/Kconfig
+++ b/drivers/iio/imu/bno055/Kconfig
@@ -8,6 +8,7 @@ config BOSCH_BNO055
config BOSCH_BNO055_SERIAL
tristate "Bosch BNO055 attached via UART"
depends on SERIAL_DEV_BUS
+ select REGMAP
select BOSCH_BNO055
help
Enable this to support Bosch BNO055 IMUs attached via UART.
