Re: [PATCH 1/2] dt-bindings: iio: pressure: honeywell,mprls0025pa

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 19 Dec 2023 15:02:20 +0200
Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx> wrote:

> ChangeLog

The whole patch description describes changes, so no need for a Changelog heading.

>  - add honeywell,pressure-triplet property that autoconfigures pmin, pmax
>     just like the hsc030pa sensor driver

Why?  Needs an explanation of why this binding is better and easier to use
+ how backwards compatibility is maintained.

>  - add support for spi-based sensors
> 
Two things, two patches.

> Datasheet:

It's a formal tag, so no line break (Even if checkpatch complains!)

> https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/micropressure-mpr-series/documents/sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf
> Signed-off-by: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
> ---
>  .../iio/pressure/honeywell,mprls0025pa.yaml   | 60 ++++++++++++++++---
>  1 file changed, 52 insertions(+), 8 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
> index d9e903fbfd99..7c4be2dec174 100644
> --- a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
> +++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
> @@ -53,33 +53,59 @@ properties:
>    honeywell,pmin-pascal:
>      description:
>        Minimum pressure value the sensor can measure in pascal.
> +      To be specified only if honeywell,pressure-triplet is set to "NA".
That just added a backwards compatibility break.  It would be fine
if there was a default: NA for honeywell,pressure-triplet or a check that either
one or the other was supplied (which I'd prefer).  Thus old bindings will work
and new ones also supported.

>  
>    honeywell,pmax-pascal:
>      description:
>        Maximum pressure value the sensor can measure in pascal.
> +      To be specified only if honeywell,pressure-triplet is set to "NA".
>  
>    honeywell,transfer-function:
>      description: |
> -      Transfer function which defines the range of valid values delivered by the
> -      sensor.
> +      Transfer function which defines the range of valid values delivered by
> +      the sensor.
>        1 - A, 10% to 90% of 2^24 (1677722 .. 15099494)
>        2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874)
>        3 - C, 20% to 80% of 2^24 (3355443 .. 13421773)
> +    enum: [1, 2, 3]
>      $ref: /schemas/types.yaml#/definitions/uint32
>  
> +  honeywell,pressure-triplet:
> +    description: |
> +      Case-sensitive five character string that defines pressure range, unit
> +      and type as part of the device nomenclature. In the unlikely case of a
> +      custom chip, set to "NA" and provide pmin-pascal and pmax-pascal.

Should not need to set to NA, just don't provide it.

> +    enum: [0001BA, 01.6BA, 02.5BA, 0060MG, 0100MG, 0160MG, 0250MG, 0400MG,
> +           0600MG, 0001BG, 01.6BG, 02.5BG, 0100KA, 0160KA, 0250KA, 0006KG,
> +           0010KG, 0016KG, 0025KG, 0040KG, 0060KG, 0100KG, 0160KG, 0250KG,
> +           0015PA, 0025PA, 0030PA, 0001PG, 0005PG, 0015PG, 0030PG, 0300YG,
> +           NA]
> +    $ref: /schemas/types.yaml#/definitions/string
> +
> +  spi-max-frequency:
> +    maximum: 800000
> +
>    vdd-supply:
>      description: provide VDD power to the sensor.
>  
>  required:
>    - compatible
>    - reg
> -  - honeywell,pmin-pascal
> -  - honeywell,pmax-pascal
> +  - honeywell,pressure-triplet
>    - honeywell,transfer-function
> -  - vdd-supply
>  
>  additionalProperties: false
>  
> +dependentSchemas:
> +  honeywell,pmin-pascal:
> +    properties:
> +      honeywell,pressure-triplet:
> +        const: NA
> +  honeywell,pmax-pascal:
> +    properties:
> +      honeywell,pressure-triplet:
> +        const: NA
> +
>  examples:
>    - |
>      #include <dt-bindings/gpio/gpio.h>
> @@ -93,10 +119,28 @@ examples:
>              reg = <0x18>;
>              reset-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
>              interrupt-parent = <&gpio3>;
> -            interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
> -            honeywell,pmin-pascal = <0>;
> -            honeywell,pmax-pascal = <172369>;
> +            interrupts = <21 IRQ_TYPE_EDGE_RISING>;
> +
> +            honeywell,pressure-triplet = "0025PA";
>              honeywell,transfer-function = <1>;
>              vdd-supply = <&vcc_3v3>;
>          };
>      };
> +  - |
> +    spi {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        pressure@0 {
> +            compatible = "honeywell,mprls0025pa";
> +            reg = <0>;
> +            spi-max-frequency = <800000>;
> +            reset-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
> +            interrupt-parent = <&gpio0>;
> +            interrupts = <30 IRQ_TYPE_EDGE_RISING>;
> +
> +            honeywell,pressure-triplet = "0015PA";
> +            honeywell,transfer-function = <1>;
> +        };
> +    };
> +...





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux