On Wed, 6 Nov 2019 11:47:21 +0200 Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> wrote: > From: Stefan Popa <stefan.popa@xxxxxxxxxx> > > The AD5600 is a single channel, 16-bit resolution, voltage output digital > to analog converter (DAC). The AD5600 uses a 3-wire SPI interface. It is > part of the AD5541 family of DACs. > > The ad5446 IIO driver implements support for some of these DACs (in the > AD5441 family), so the change is a simple entry in this driver. > > Link: https://www.analog.com/media/en/technical-documentation/data-sheets/AD5600.pdf > > Signed-off-by: Stefan Popa <stefan.popa@xxxxxxxxxx> > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> Applied to the togreg branch of iio.git and pushed out as testing Thanks, Jonathan > --- > drivers/iio/dac/Kconfig | 4 ++-- > drivers/iio/dac/ad5446.c | 6 ++++++ > 2 files changed, 8 insertions(+), 2 deletions(-) > > diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig > index cc42219a64f7..979070196da9 100644 > --- a/drivers/iio/dac/Kconfig > +++ b/drivers/iio/dac/Kconfig > @@ -60,8 +60,8 @@ config AD5446 > help > Say yes here to build support for Analog Devices AD5300, AD5301, AD5310, > AD5311, AD5320, AD5321, AD5444, AD5446, AD5450, AD5451, AD5452, AD5453, > - AD5512A, AD5541A, AD5542A, AD5543, AD5553, AD5601, AD5602, AD5611, AD5612, > - AD5620, AD5621, AD5622, AD5640, AD5641, AD5660, AD5662 DACs > + AD5512A, AD5541A, AD5542A, AD5543, AD5553, AD5600, AD5601, AD5602, AD5611, > + AD5612, AD5620, AD5621, AD5622, AD5640, AD5641, AD5660, AD5662 DACs > as well as Texas Instruments DAC081S101, DAC101S101, DAC121S101. > > To compile this driver as a module, choose M here: the > diff --git a/drivers/iio/dac/ad5446.c b/drivers/iio/dac/ad5446.c > index 7df8b4cc295d..61c670f7fc5f 100644 > --- a/drivers/iio/dac/ad5446.c > +++ b/drivers/iio/dac/ad5446.c > @@ -327,6 +327,7 @@ enum ad5446_supported_spi_device_ids { > ID_AD5541A, > ID_AD5512A, > ID_AD5553, > + ID_AD5600, > ID_AD5601, > ID_AD5611, > ID_AD5621, > @@ -381,6 +382,10 @@ static const struct ad5446_chip_info ad5446_spi_chip_info[] = { > .channel = AD5446_CHANNEL(14, 16, 0), > .write = ad5446_write, > }, > + [ID_AD5600] = { > + .channel = AD5446_CHANNEL(16, 16, 0), > + .write = ad5446_write, > + }, > [ID_AD5601] = { > .channel = AD5446_CHANNEL_POWERDOWN(8, 16, 6), > .write = ad5446_write, > @@ -448,6 +453,7 @@ static const struct spi_device_id ad5446_spi_ids[] = { > {"ad5542a", ID_AD5541A}, /* ad5541a and ad5542a are compatible */ > {"ad5543", ID_AD5541A}, /* ad5541a and ad5543 are compatible */ > {"ad5553", ID_AD5553}, > + {"ad5600", ID_AD5600}, > {"ad5601", ID_AD5601}, > {"ad5611", ID_AD5611}, > {"ad5621", ID_AD5621},
