My email server returned error so I was confused whether all patches reached to mailing list intact or not, that is why I resent. Regards, Rishi On Sat, Oct 5, 2019 at 7:38 PM Jonathan Cameron <jic23@xxxxxxxxxx> wrote: > > On Tue, 24 Sep 2019 16:21:55 +0530 > Rishi Gupta <gupt21@xxxxxxxxx> wrote: > > When doing a RESEND as opposed to a new version, please say > why. > > > The veml6030 is an ambient light sensor from vishay and > > is a different hardware from an existing hardware for which > > driver currently exist, therefore this driver submission. > > > > * All features; ALS, white channel & power management is > > supported. > > > > * All configurable parameters are supported through standard > > iio sysfs entries. User space can get valid values of any > > parameter (xx_available) and then can write to appropriate > > sysfs entry. > > > > * User space can get ALS & White channel readings through RAW > > IIO interface. > > > > * IIO events are used to notify application whenever threshold > > is crossed. This uses IRQ pin of veml6030. > > > > * Some registers in veml6030 are read only. For these registers > > read callback returns error to user space. > > > > There are 3 patches for this submission: > > [PATCH 1/3] iio: light: add driver for veml6030 ambient light sensor > > [PATCH 2/3] dt-bindings: iio: light: add veml6030 ALS bindings > > [PATCH 3/3] iio: documentation: light: Add veml6030 sysfs documentation > > > > Rishi Gupta (3): > > iio: light: add driver for veml6030 ambient light sensor > > dt-bindings: iio: light: add veml6030 ALS bindings > > iio: documentation: light: Add veml6030 sysfs documentation > > > > .../ABI/testing/sysfs-bus-iio-light-veml6030 | 49 ++ > > .../devicetree/bindings/iio/light/veml6030.yaml | 62 ++ > > drivers/iio/light/Kconfig | 11 + > > drivers/iio/light/Makefile | 1 + > > drivers/iio/light/veml6030.c | 633 +++++++++++++++++++++ > > 5 files changed, 756 insertions(+) > > create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-light-veml6030 > > create mode 100644 Documentation/devicetree/bindings/iio/light/veml6030.yaml > > create mode 100644 drivers/iio/light/veml6030.c > > >
