On Mon, 28 Oct 2019 07:11:51 +0000
"Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx> wrote:
> On Sun, 2019-10-27 at 20:37 +0200, Matt Ranostay wrote:
> > [External]
> >
> > On Sun, Oct 27, 2019 at 6:58 PM Jonathan Cameron <jic23@xxxxxxxxxx>
> > wrote:
> > > On Wed, 23 Oct 2019 11:27:14 +0300
> > > Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> wrote:
> > >
> > > > The iio_triggered_buffer_postenable() hook should be called first to
> > > > attach the poll function and the iio_triggered_buffer_predisable()
> > > > hook
> > > > should be called last in the predisable hook.
> > > >
> > > > This change updates the driver to attach/detach the poll func in the
> > > > correct order.
> > > >
> > > > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
> > > Seems fine, but should have cc'd Matt and I'd like to give him time
> > > to take a quick look.
> > >
> >
> > Reviewed-by: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
>
> Apologies for not CC-ing Matt.
> I guess I wasn't paying [close enough] attention to the output of
> get_maintainers.pl
>
> Thanks
> Alex
>
Applied to the togreg branch of iio.git and pushed out as testing for the
autobuilders to play with it.
Thanks,
Jonathan
> >
> > > +CC Matt.
> > >
> > > Thanks,
> > >
> > > Jonathan
> > >
> > > > ---
> > > > drivers/iio/humidity/hdc100x.c | 19 +++++++++++--------
> > > > 1 file changed, 11 insertions(+), 8 deletions(-)
> > > >
> > > > diff --git a/drivers/iio/humidity/hdc100x.c
> > > > b/drivers/iio/humidity/hdc100x.c
> > > > index bfe1cdb16846..963ff043eecf 100644
> > > > --- a/drivers/iio/humidity/hdc100x.c
> > > > +++ b/drivers/iio/humidity/hdc100x.c
> > > > @@ -278,31 +278,34 @@ static int hdc100x_buffer_postenable(struct
> > > > iio_dev *indio_dev)
> > > > struct hdc100x_data *data = iio_priv(indio_dev);
> > > > int ret;
> > > >
> > > > + ret = iio_triggered_buffer_postenable(indio_dev);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > /* Buffer is enabled. First set ACQ Mode, then attach poll func
> > > > */
> > > > mutex_lock(&data->lock);
> > > > ret = hdc100x_update_config(data, HDC100X_REG_CONFIG_ACQ_MODE,
> > > > HDC100X_REG_CONFIG_ACQ_MODE);
> > > > mutex_unlock(&data->lock);
> > > > if (ret)
> > > > - return ret;
> > > > + iio_triggered_buffer_predisable(indio_dev);
> > > >
> > > > - return iio_triggered_buffer_postenable(indio_dev);
> > > > + return ret;
> > > > }
> > > >
> > > > static int hdc100x_buffer_predisable(struct iio_dev *indio_dev)
> > > > {
> > > > struct hdc100x_data *data = iio_priv(indio_dev);
> > > > - int ret;
> > > > -
> > > > - /* First detach poll func, then reset ACQ mode. OK to disable
> > > > buffer */
> > > > - ret = iio_triggered_buffer_predisable(indio_dev);
> > > > - if (ret)
> > > > - return ret;
> > > > + int ret, ret2;
> > > >
> > > > mutex_lock(&data->lock);
> > > > ret = hdc100x_update_config(data, HDC100X_REG_CONFIG_ACQ_MODE,
> > > > 0);
> > > > mutex_unlock(&data->lock);
> > > >
> > > > + ret2 = iio_triggered_buffer_predisable(indio_dev);
> > > > + if (ret == 0)
> > > > + ret = ret2;
> > > > +
> > > > return ret;
> > > > }
> > > >
