devm_add_action_or_reset() is introduced as a helper function which
internally calls devm_add_action(). If devm_add_action() fails
then it will execute the action mentioned and return the error code.
This reduce source code size (avoid writing the action twice)
and reduce the likelyhood of bugs.
Signed-off-by: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
---
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 53a59957cc54..e067927317bd 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -1096,10 +1096,9 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
if (result)
return result;
- result = devm_add_action(dev, inv_mpu_core_disable_regulator_action,
+ result = devm_add_action_or_reset(dev, inv_mpu_core_disable_regulator_action,
st);
if (result) {
- inv_mpu_core_disable_regulator_action(st);
dev_err(dev, "Failed to setup regulator cleanup action %d\n",
result);
return result;
--
2.11.0
