[PATCH v2 09/11] iio:pressure: device settings are set immediately during probe

[Denis Ciocca <denis.ciocca@xxxxxx>]

This patch set pressure settings right after probe start. This is
done in preparation of regmap that needs different configuration
based on multiread bit value.

Signed-off-by: Denis Ciocca <denis.ciocca@xxxxxx>
---
Changes in v2:
 not there in v1.

 drivers/iio/pressure/st_pressure_i2c.c | 27 +++++++++++++++++---------
 drivers/iio/pressure/st_pressure_spi.c | 18 +++++++++++++----
 2 files changed, 32 insertions(+), 13 deletions(-)

diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c
index b7d9ba706abc..466e7dde5eae 100644
--- a/drivers/iio/pressure/st_pressure_i2c.c
+++ b/drivers/iio/pressure/st_pressure_i2c.c
@@ -78,18 +78,13 @@ static const struct i2c_device_id st_press_id_table[] = {
 MODULE_DEVICE_TABLE(i2c, st_press_id_table);
 
 static int st_press_i2c_probe(struct i2c_client *client,
-						const struct i2c_device_id *id)
+			      const struct i2c_device_id *id)
 {
-	struct iio_dev *indio_dev;
+	const struct st_sensor_settings *settings;
 	struct st_sensor_data *press_data;
+	struct iio_dev *indio_dev;
 	int ret;
 
-	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*press_data));
-	if (!indio_dev)
-		return -ENOMEM;
-
-	press_data = iio_priv(indio_dev);
-
 	if (client->dev.of_node) {
 		st_sensors_of_name_probe(&client->dev, st_press_of_match,
 					 client->name, sizeof(client->name));
@@ -99,10 +94,24 @@ static int st_press_i2c_probe(struct i2c_client *client,
 			return -ENODEV;
 
 		strlcpy(client->name, st_press_id_table[ret].name,
-				sizeof(client->name));
+			sizeof(client->name));
 	} else if (!id)
 		return -ENODEV;
 
+	settings = st_press_get_settings(client->name);
+	if (!settings) {
+		dev_err(&client->dev, "device name %s not recognized.\n",
+			client->name);
+		return -ENODEV;
+	}
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*press_data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	press_data = iio_priv(indio_dev);
+	press_data->sensor_settings = (struct st_sensor_settings *)settings;
+
 	st_sensors_i2c_configure(indio_dev, client, press_data);
 
 	ret = st_press_common_probe(indio_dev);
diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c
index ef61401c41d3..3e8c1ffe001e 100644
--- a/drivers/iio/pressure/st_pressure_spi.c
+++ b/drivers/iio/pressure/st_pressure_spi.c
@@ -61,18 +61,28 @@ MODULE_DEVICE_TABLE(of, st_press_of_match);
 
 static int st_press_spi_probe(struct spi_device *spi)
 {
-	struct iio_dev *indio_dev;
+	const struct st_sensor_settings *settings;
 	struct st_sensor_data *press_data;
+	struct iio_dev *indio_dev;
 	int err;
 
+	st_sensors_of_name_probe(&spi->dev, st_press_of_match,
+				 spi->modalias, sizeof(spi->modalias));
+
+	settings = st_press_get_settings(spi->modalias);
+	if (!settings) {
+		dev_err(&spi->dev, "device name %s not recognized.\n",
+			spi->modalias);
+		return -ENODEV;
+	}
+
 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*press_data));
-	if (indio_dev == NULL)
+	if (!indio_dev)
 		return -ENOMEM;
 
 	press_data = iio_priv(indio_dev);
+	press_data->sensor_settings = (struct st_sensor_settings *)settings;
 
-	st_sensors_of_name_probe(&spi->dev, st_press_of_match,
-				 spi->modalias, sizeof(spi->modalias));
 	st_sensors_spi_configure(indio_dev, spi, press_data);
 
 	err = st_press_common_probe(indio_dev);
-- 
2.22.0