U-Boot V2 Development (Barebox)

• Date Index

• [PATCH 1/2] ARM Kindle3 defconfig: enable MMU, Alexander Kurz
  • [PATCH 2/2] ARM Kindle3: switch on pull-ups for fiveway device, Alexander Kurz
  • Re: [PATCH 1/2] ARM Kindle3 defconfig: enable MMU, Sascha Hauer
• [PATCH] ARM: Makefile: restore kindle3 imxcfg-y setting, Alexander Kurz
  • Re: [PATCH] ARM: Makefile: restore kindle3 imxcfg-y setting, Sascha Hauer
• [PATCH v2] mci: imx-esdhc: resolve conflicting flags, Alexander Kurz
  • Re: [PATCH v2] mci: imx-esdhc: resolve conflicting flags, Sascha Hauer
• [PATCH] mci: imx-esdhc: resolve conflicting flags, Alexander Kurz
  • Re: [PATCH] mci: imx-esdhc: resolve conflicting flags, Sascha Hauer
• [PATCH] ARM: dts: mx8mq-phytec-phycore-som: Add watchdog, Christian Hemp
  • Re: [PATCH] ARM: dts: mx8mq-phytec-phycore-som: Add watchdog, Sascha Hauer
• [PATCH] mci: imx-esdhc-pbl: initialize is_be, Christian Hemp
  • Re: [PATCH] mci: imx-esdhc-pbl: initialize is_be, Sascha Hauer
• [PATCH 01/15] ramoops: probe from device tree if OFTREE is enabled, Juergen Borleis
  • [PATCH 04/15] pstore: Make ramoops_init_przs generic for other prz arrays, Juergen Borleis
  • [PATCH 15/15] pstore/doc: fix layout, Juergen Borleis
  • [PATCH 10/15] pstore: Switch pstore_mkfile to pass record, Juergen Borleis
  • [PATCH 02/15] pstore/ram: add Device Tree bindings, Juergen Borleis
  • [PATCH 12/15] pstore: Replace arguments for write() API, Juergen Borleis
  • [PATCH 05/15] pstore/ram: Do not use stack VLA for parity workspace, Juergen Borleis
  • [PATCH 06/15] pstore: improve error report for failed setup, Juergen Borleis
  • [PATCH 13/15] pstore: pass ramoops configuration to kernel via device tree, Juergen Borleis
  • [PATCH 09/15] pstore: add console support, Juergen Borleis
  • [PATCH 11/15] pstore: Replace arguments for read() API, Juergen Borleis
  • [PATCH 08/15] pstore: Extract common arguments into structure, Juergen Borleis
  • [PATCH 03/15] ramoops: use DT reserved-memory bindings, Juergen Borleis
  • [PATCH 07/15] pstore/ram: Clarify resource reservation labels, Juergen Borleis
  • [PATCH 14/15] pstore: ramoops: allow zapping invalid buffers in read-only mode, Juergen Borleis
  • Re: [PATCH 01/15] ramoops: probe from device tree if OFTREE is enabled, Sascha Hauer
• [help][bootchooser][device-tree] create an update system with yocto and rauc, jairo
• [PATCH] common: extend BOOTM_FITIMAGE_SIGNATURE help text, Bastian Krause
  • Re: [PATCH] common: extend BOOTM_FITIMAGE_SIGNATURE help text, Sascha Hauer
• [PATCH] drivers: video: Fix parsing oftree timings, Alexander Shiyan
  • Re: [PATCH] drivers: video: Fix parsing oftree timings, Sascha Hauer
• [PATCH] dtc: disable noisy warnings, Sascha Hauer
• [PATCH 1/6] ARM: add Zii common directory and move switch reset command, Lucas Stach
  • [PATCH 2/6] ARM: zii-common: add support for switch reset on RDU1, Lucas Stach
  • [PATCH 3/6] ARM: zii-common: introduce RDU part-number based fixup abstraction, Lucas Stach
  • [PATCH 4/6] ARM: zii-common: fetch network config from SP, Lucas Stach
  • [PATCH 6/6] ARM: rdu2: patch DSA config, Lucas Stach
  • [PATCH 5/6] ARM: rdu2: Add p/n based fixups for touchscreen and display panel, Lucas Stach
  • Re: [PATCH 1/6] ARM: add Zii common directory and move switch reset command, Sascha Hauer
• [PATCH 1/2] ARM: i.MX7: Make sure CNTFRQ is initialized early enough, Andrey Smirnov
  • [PATCH 2/2] ARM: i.MX8MQ: Don't use cpu_is_mx8mq() at core_initcall level, Andrey Smirnov
  • Re: [PATCH 1/2] ARM: i.MX7: Make sure CNTFRQ is initialized early enough, Sascha Hauer
• [RFC][PATCH] pbl multiimage: Allow to check image sizes, Sascha Hauer
• [PATCH 00/15] barebox Layerscape support, Sascha Hauer
  • [PATCH 08/15] scripts: Add Layerscape image tool, Sascha Hauer
  • [PATCH 11/15] ARM: Add basic Layerscape support, Sascha Hauer
  • [PATCH 14/15] ARM: Layerscape: Add TQ TQMLS1046a board support, Sascha Hauer
  • [PATCH 05/15] esdhc-xload: Add support for Layerscape, Sascha Hauer
  • [PATCH 13/15] ARM: Layerscape: Add LS1046a RDB board support, Sascha Hauer
  • [PATCH 02/15] Add Freescale QUICC Engine firmware support, Sascha Hauer
  • [PATCH 04/15] ARM: Add arm64 pbl udelay, Sascha Hauer
    • Re: [PATCH 04/15] ARM: Add arm64 pbl udelay, Andrey Smirnov
      • Re: [PATCH 04/15] ARM: Add arm64 pbl udelay, Sascha Hauer
        • Re: [PATCH 04/15] ARM: Add arm64 pbl udelay, Andrey Smirnov
  • [PATCH 06/15] watchdog: imx: Add register accessor functions, Sascha Hauer
  • [PATCH 15/15] ARM: Add layerscape_defconfig, Sascha Hauer
  • [PATCH 09/15] i2c: i.MX: Add layerscape support, Sascha Hauer
  • [PATCH 12/15] clk: Add Layerscape clk support, Sascha Hauer
  • [PATCH 03/15] net: Add Freescale FMan ethernet support, Sascha Hauer
  • [PATCH 10/15] ddr: fsl: Add Freescale ddr driver, Sascha Hauer
  • [PATCH 07/15] watchdog: imx: Add big endian register access support, Sascha Hauer
  • [PATCH 01/15] mci: imx-esdhc: Actually enable cache snooping, Sascha Hauer
• [PATCH v2] usb: dwc3: Toggle GCTL.CORESOFTRESET as a first step, Andrey Smirnov
  • Re: [PATCH v2] usb: dwc3: Toggle GCTL.CORESOFTRESET as a first step, Sascha Hauer
• [PATCH 0/6] ZynqMP clock driver, Michael Tretter
  • [PATCH 3/6] ARM: zynqmp: move PAYLOAD_ARG_CNT to firmware header, Michael Tretter
  • [PATCH 6/6] ARM: zynqmp: switch to firmware clock driver, Michael Tretter
  • [PATCH 2/6] ARM: zynqmp: populate zynqmp_firmware dt node, Michael Tretter
  • [PATCH 1/6] of: populate "/firmware" while populating device tree, Michael Tretter
  • [PATCH 5/6] ARM: zynqmp: add firmware DT node, Michael Tretter
  • [PATCH 4/6] clk: add ZynqMP clock driver, Michael Tretter
  • Re: [PATCH 0/6] ZynqMP clock driver, Sascha Hauer
• [PATCH 0/3] Earlycon command line option support, Andrey Smirnov
  • [PATCH 1/3] console: Add plumbing to expose earlycon/bootconsole parameter, Andrey Smirnov
  • [PATCH 2/3] serial: i.MX: Add code to export "earlycon" setting, Andrey Smirnov
  • [PATCH 3/3] serial: lpuart: Add code to export "earlycon" setting, Andrey Smirnov
  • Re: [PATCH 0/3] Earlycon command line option support, Lucas Stach
    • Re: [PATCH 0/3] Earlycon command line option support, Sascha Hauer
• [PATCH] libfile: Make use of write_full() in copy_file(), Andrey Smirnov
  • Re: [PATCH] libfile: Make use of write_full() in copy_file(), Sascha Hauer
• [PATCH 1/2] commands: memcpy: Make use of write_full(), Andrey Smirnov
  • [PATCH 2/2] commands: memcpy: Make use of min_t(), Andrey Smirnov
  • Re: [PATCH 1/2] commands: memcpy: Make use of write_full(), Sascha Hauer
• [PATCH 1/2] ARM: zii-vf610-dev: Add ZII SPB4 board, Andrey Smirnov
  • [PATCH 2/2] ARM: zii-vf610-dev: Switch SCU4 AIB board to use upstream DTS, Andrey Smirnov
  • Re: [PATCH 1/2] ARM: zii-vf610-dev: Add ZII SPB4 board, Sascha Hauer
• [PATCH 1/3] fs: ramfs: Drop unused 'handle' filed from struct ramfs_inode, Andrey Smirnov
  • [PATCH 2/3] fs: ramfs: Drop unused 'chunks' conter, Andrey Smirnov
  • [PATCH 3/3] fs: ramfs: Drop unnecessary check in ramfs_mknod(), Andrey Smirnov
  • Re: [PATCH 1/3] fs: ramfs: Drop unused 'handle' filed from struct ramfs_inode, Sascha Hauer
• [PATCH] commands: bootaux: New command bootaux for iMX, David Brandt
  • Re: [PATCH] commands: bootaux: New command bootaux for iMX, Roland Hieber
  • Re: [PATCH] commands: bootaux: New command bootaux for iMX, Andrey Smirnov
    • Re: [PATCH] commands: bootaux: New command bootaux for iMX, Oleksij Rempel
  • Re: [PATCH] commands: bootaux: New command bootaux for iMX, Sascha Hauer
    • Re: [PATCH] commands: bootaux: New command bootaux for iMX, David Brandt
  • [PATCH v2] commands: bootaux: New command bootaux for iMX, David Brandt
    • Re: [PATCH v2] commands: bootaux: New command bootaux for iMX, Sascha Hauer
• [PATCH 1/3] net: phy: Add PHY_ID_MATCH_* macros, Sascha Hauer
  • [PATCH 3/3] realtek phy driver, Sascha Hauer
  • [PATCH 2/3] net: phy: Add register access helper functions for phys, Sascha Hauer
• [PATCH 00/14] Add initial STMicroelectronics MP1 support, Sascha Hauer
  • [PATCH 10/14] clk: mux: Support CLK_SET_RATE_NO_REPARENT flag, Sascha Hauer
  • [PATCH 12/14] ARM: stm32mp1: Add serial driver, Sascha Hauer
  • [PATCH 02/14] clk: parent_names should be const, Sascha Hauer
  • [PATCH 11/14] ARM: stm32mp1: Add clk driver, Sascha Hauer
  • [PATCH 07/14] clk: divider: Support CLK_DIVIDER_READ_ONLY flag, Sascha Hauer
  • [PATCH 06/14] clk: divider: pass divider flags, Sascha Hauer
  • [PATCH 04/14] clk: Make CLK_IGNORE_UNUSED generic, Sascha Hauer
  • [PATCH 09/14] clk: mux: Support CLK_MUX_READ_ONLY flag, Sascha Hauer
  • [PATCH 14/14] ARM: Add initial STM32MP1 support, Sascha Hauer
    • Re: [PATCH 14/14] ARM: Add initial STM32MP1 support, Andrey Smirnov
      • Re: [PATCH 14/14] ARM: Add initial STM32MP1 support, Sascha Hauer
  • [PATCH 05/14] clk: Support CLK_IS_CRITICAL flag, Sascha Hauer
  • [PATCH 01/14] clk: clk-composite: return parent_rate if no rate clk, Sascha Hauer
  • [PATCH 03/14] clk: export clk_gate_is_enabled(), Sascha Hauer
  • [PATCH 08/14] clk: mux: Support mux specific flags, Sascha Hauer
  • [PATCH 13/14] clocksource: Enable architected timer support for CPU_V7, Sascha Hauer
• [PATCH v2 0/4] MIPS: add relocation support, Oleksij Rempel
  • [PATCH v2 1/4] MIPS: relocation: pass ram size to pbl_main_entry, Oleksij Rempel
  • [PATCH v2 4/4] MIPS: remove request_sdram_region "fdt", Oleksij Rempel
  • [PATCH v2 3/4] MIPS: relocation: do not use configurable memory layout, Oleksij Rempel
  • [PATCH v2 2/4] MIPS: relocation: add relocation support, Oleksij Rempel
    • Re: [PATCH v2 2/4] MIPS: relocation: add relocation support, Sascha Hauer
  • Re: [PATCH v2 0/4] MIPS: add relocation support, Sascha Hauer
  • Re: [PATCH v2 0/4] MIPS: add relocation support, Sascha Hauer
• [PATCH 00/26] USB storage improvements, Andrey Smirnov
  • [PATCH 01/26] usb: storage: Simplify memory allocation in usb_stor_probe(), Andrey Smirnov
  • [PATCH 02/26] usb: storage: Replace custom debug tracing with dev_dbg, Andrey Smirnov
  • [PATCH 04/26] usb: storage: Make usb_stor_read_capacity() a standalone function, Andrey Smirnov
  • [PATCH 06/26] usb: storage: Make usb_stor_test_unit_ready() a standalone function, Andrey Smirnov
  • [PATCH 03/26] usb: storage: Don't use "unsigned long" for 32-bit values, Andrey Smirnov
  • [PATCH 05/26] usb: storage: Make usb_stor_inquiry() a standalone function, Andrey Smirnov
  • [PATCH 09/26] usb: storage: Drop extra call to transport in usb_stor_write_10(), Andrey Smirnov
  • [PATCH 07/26] usb: storage: Make usb_stor_read_10() a standalone function, Andrey Smirnov
  • [PATCH 08/26] usb: storage: Make usb_stor_write_10() a standalone function, Andrey Smirnov
  • [PATCH 10/26] usb: storage: Share code for READ(10) and WRITE(10), Andrey Smirnov
  • [PATCH 12/26] usb: storage: Remove unused variables, Andrey Smirnov
  • [PATCH 11/26] usb: storage: Make usb_stor_request_sense() a standalone function, Andrey Smirnov
  • [PATCH 14/26] usb: hub: Do not include <scsi.h>, Andrey Smirnov
  • [PATCH 15/26] ata: ahci: Do not include <scsi.h>, Andrey Smirnov
  • [PATCH 16/26] usb: storage: Drop unused fields in struct us_data, Andrey Smirnov
  • [PATCH 13/26] usb: storage: Drop struct SCSI_cmd_block, Andrey Smirnov
  • [PATCH 17/26] usb: storage: Drop unused us_blkdev_list, Andrey Smirnov
  • [PATCH 18/26] usb: storage: Introduce usb_stor_transport(), Andrey Smirnov
  • [PATCH 19/26] usb: storage: Use put_unaligned_be* helpers, Andrey Smirnov
  • [PATCH 20/26] usb: Drop usb_disable_asynch(), Andrey Smirnov
  • [PATCH 22/26] usb: storage: Drop needless macro, Andrey Smirnov
  • [PATCH 21/26] usb: storage: Drop unnecessary check in usb_stor_blk_io(), Andrey Smirnov
  • [PATCH 25/26] usb: storage: Drop unnecessary assignment, Andrey Smirnov
  • [PATCH 23/26] usb: storage: Use simple boolean to speficy read vs. write operation, Andrey Smirnov
  • [PATCH 24/26] usb: storage: Simplify I/O loop in usb_stor_blk_io(), Andrey Smirnov
  • [PATCH 26/26] usb: storage: Inline usb_limit_blk_cnt(), Andrey Smirnov
  • Re: [PATCH 00/26] USB storage improvements, Sascha Hauer
• v2019.03.0, Sascha Hauer
• [PATCH 00/17] lseek related fixes, Andrey Smirnov
  • [PATCH 01/17] libfile: Make failure path of open_and_lseek() consistent, Andrey Smirnov
  • [PATCH 02/17] common: Always return enum filetype in file_name_detect_type_offset(), Andrey Smirnov
  • [PATCH 03/17] MIPS: ath79: Use errno to get error code from open_and_lseek(), Andrey Smirnov
  • [PATCH 04/17] ARM: i.MX: bbu: Fix variable type in imx_bbu_external_nand_update(), Andrey Smirnov
  • [PATCH 05/17] ARM: i.MX: bbu: Fix lseek error check in imx_bbu_external_nand_update(), Andrey Smirnov
  • [PATCH 06/17] ARM: i.MX: bbu: Fix lseek error check in imx_bbu_internal_v2_write_nand_dbbt(), Andrey Smirnov
  • [PATCH 07/17] ARM: i.MX: bbu: Fix variable type in imx_bbu_internal_v2_write_nand_dbbt(), Andrey Smirnov
  • [PATCH 08/17] bpkfs: Fix lseek error check in bpkfs_probe(), Andrey Smirnov
  • [PATCH 09/17] uimage: Fix lseek error check in uimage_verify(), Andrey Smirnov
  • [PATCH 10/17] uimage: Fix lseek error check in uimage_load(), Andrey Smirnov
  • [PATCH 11/17] uimage: Fix lseek error check in uimage_load_to_buf(), Andrey Smirnov
  • [PATCH 13/17] state: Fix lseek error check in state_backend_bucket_direct_write(), Andrey Smirnov
  • [PATCH 12/17] state: Fix lseek error check in state_backend_bucket_direct_read(), Andrey Smirnov
  • [PATCH 14/17] state: Fix lseek error check in state_mtd_peb_read(), Andrey Smirnov
  • [PATCH 15/17] state: Fix lseek error check in state_mtd_peb_write(), Andrey Smirnov
  • [PATCH 16/17] commands: loadxy: Make use of open_and_lseek(), Andrey Smirnov
  • [PATCH 17/17] commands: loadb: Make use of open_and_lseek(), Andrey Smirnov
  • Re: [PATCH 00/17] lseek related fixes, Sascha Hauer
• [PATCH] usb: dwc3: Toggle GCTL.CORESOFTRESET as a first step, Andrey Smirnov
  • Re: [PATCH] usb: dwc3: Toggle GCTL.CORESOFTRESET as a first step, Sascha Hauer
    • Re: [PATCH] usb: dwc3: Toggle GCTL.CORESOFTRESET as a first step, Andrey Smirnov
• [PATCH] fix zbarebox linking with new ld, 张忠山
  • Re: [PATCH] fix zbarebox linking with new ld, Sascha Hauer
• [PATCH 0/5] ARM: rpi: refactor debug_ll, Sascha Hauer
  • [PATCH 2/5] debug_ll: Move pl011 header file to architecture independent place, Sascha Hauer
  • [PATCH 5/5] ARM: rpi: Add mini UART debug_ll support, Sascha Hauer
    • Re: [PATCH 5/5] ARM: rpi: Add mini UART debug_ll support, Tomaž Šolc
      • Re: [PATCH 5/5] ARM: rpi: Add mini UART debug_ll support, Sascha Hauer
        • [HELP] Kernel + initrd in FIT, Seraphim Dolbilov
          • Re: [HELP] Kernel + initrd in FIT, Sascha Hauer
  • [PATCH 4/5] ARM: rpi: move debug UART Kconfig settings, Sascha Hauer
    • Re: [PATCH 4/5] ARM: rpi: move debug UART Kconfig settings, Tomaž Šolc
  • [PATCH 3/5] debug_ll: Add ns16550 early debugging functions, Sascha Hauer
  • [PATCH 1/5] ARM: rpi: Move UART base address definitions to header file, Sascha Hauer
  • Re: [PATCH 0/5] ARM: rpi: refactor debug_ll, Tomaž Šolc
• [PATCH] PCI: dwc: tune down link up messages, Lucas Stach
  • Re: [PATCH] PCI: dwc: tune down link up messages, Sascha Hauer
• [PATCH v2 0/2] ARM: rpi: refactor debug UART Kconfig settings., Tomaz Solc
  • [PATCH v2 1/2] ARM: rpi: move debug UART Kconfig settings., Tomaz Solc
  • [PATCH v2 2/2] common: Kconfig: improve help text for DEBUG_LL, Tomaz Solc
    • Re: [PATCH v2 2/2] common: Kconfig: improve help text for DEBUG_LL, Sascha Hauer
• Tutorial on how to boot Raspbian from Barebox, Tomaž Šolc
• [PATCH 0/5] ESDHC xload: Prepare for Layerscape support, Sascha Hauer
  • [PATCH 3/5] esdhc-xload: Use static inline io wrappers, Sascha Hauer
  • [PATCH 5/5] esdhc-xload: check for PRSSTAT_BREN only after each block, Sascha Hauer
  • [PATCH 2/5] esdhc-xload: move some register defines to header file, Sascha Hauer
  • [PATCH 1/5] esdhc-xload: Move to drivers/mci, Sascha Hauer
  • [PATCH 4/5] esdhc-xload: Add bigendian support, Sascha Hauer
• [PATCH 0/6] SPD EEPROM improvements, Sascha Hauer
  • [PATCH 6/6] ddr_spd: Enable in PBL, Sascha Hauer
  • [PATCH 4/6] ddr_spd: Add function to read eeprom, Sascha Hauer
    • Re: [PATCH 4/6] ddr_spd: Add function to read eeprom, Sam Ravnborg
    • Re: [PATCH 4/6] ddr_spd: Add function to read eeprom, Sam Ravnborg
      • Re: [PATCH 4/6] ddr_spd: Add function to read eeprom, Sascha Hauer
  • [PATCH 1/6] crc: import crc_itu_t() from kernel, Sascha Hauer
    • Re: [PATCH 1/6] crc: import crc_itu_t() from kernel, Sam Ravnborg
      • Re: [PATCH 1/6] crc: import crc_itu_t() from kernel, Sascha Hauer
  • [PATCH 3/6] ddr_spd: Update from U-Boot, Sascha Hauer
  • [PATCH 5/6] ddr_spd: provide common SPD type, Sascha Hauer
  • [PATCH 2/6] crc: Add PBL variant for crc_itu_t(), Sascha Hauer
• [PATCH] ARM: Fix cpu_info for armv8, Sascha Hauer
• [PATCH] include/phy: Add missing modes, Sascha Hauer
• [PATCH] fs: ubifs: Remove unused crc16 functions, Sascha Hauer
• [PATCH 00/10] i2c: i.MX more cleanup, early driver, Sascha Hauer
  • [PATCH 03/10] i2c: i.MX: Fix FSL_I2C_DFSRR register offset, Sascha Hauer
  • [PATCH 07/10] i2c: i.MX: remove unused define, Sascha Hauer
  • [PATCH 04/10] i2c: i.MX: remove unnecessary ifdef, Sascha Hauer
  • [PATCH 08/10] i2c: i.MX: Read clock-frequency from device tree, Sascha Hauer
  • [PATCH 02/10] i2c: i.MX: remove unnecessary ifdef, Sascha Hauer
  • [PATCH 01/10] i2c: i.MX: remove unnecesary define, Sascha Hauer
  • [PATCH 06/10] i2c: i.MX: stop after read only in last transfer of a message, Sascha Hauer
  • [PATCH 05/10] i2c: i.MX: Consolidate status polling loops, Sascha Hauer
  • [PATCH 09/10] i2c: i.MX: Create header file for register defines, Sascha Hauer
  • [PATCH 10/10] i2c: i.MX: Add early driver for use in PBL, Sascha Hauer
• Loading Barebox to RAM, Patrick Schneider
  • Re: Loading Barebox to RAM, Oleksij Rempel
    • Re: Loading Barebox to RAM, Sascha Hauer
• [PATCH] i.MX habv3: add missing includes and make locally used function static, Michael Olbrich
  • Re: [PATCH] i.MX habv3: add missing includes and make locally used function static, Sascha Hauer
• [PATCH] ARM: rpi: refactor debug UART Kconfig settings., Tomaz Solc
  • Re: [PATCH] ARM: rpi: refactor debug UART Kconfig settings., Rouven Czerwinski
  • Re: [PATCH] ARM: rpi: refactor debug UART Kconfig settings., Roland Hieber
  • Re: [PATCH] ARM: rpi: refactor debug UART Kconfig settings., Sascha Hauer
    • Re: [PATCH] ARM: rpi: refactor debug UART Kconfig settings., Tomaž Šolc
      • Re: [PATCH] ARM: rpi: refactor debug UART Kconfig settings., Sascha Hauer
• [PATCH 1/2] fixup! ARM: imx8mq-zii-ultra: Enable PCIE1 and PCIE2, Andrey Smirnov
  • [PATCH 2/2] fixup! ARM: imx8mq-zii-ultra: Add USB related nodes, Andrey Smirnov
  • Re: [PATCH 1/2] fixup! ARM: imx8mq-zii-ultra: Enable PCIE1 and PCIE2, Sascha Hauer
• [PATCH v2 0/3] VideoCore FDT interop for Raspberry Pi, Tomaz Solc
  • [PATCH v2 1/3] ARM: start: save end of memory passed to start., Tomaz Solc
  • [PATCH v2 3/3] ARM: rpi: save bootargs from VC FDT to vc.bootargs, Tomaz Solc
  • [PATCH v2 2/3] ARM: rpi: save fdt that was passed from VideoCore, Tomaz Solc
  • Re: [PATCH v2 0/3] VideoCore FDT interop for Raspberry Pi, Sascha Hauer
• [PATCH 0/5] i2c: i.MX driver some cleanup, Sascha Hauer
  • [PATCH 1/5] i2c: i.MX: Do not call i2c_fsl_bus_busy twice, Sascha Hauer
  • [PATCH 5/5] i2c: i.MX: fix variable name, Sascha Hauer
  • [PATCH 3/5] i2c: i.MX: Track stopped status in I2CR_MSTA bit, Sascha Hauer
  • [PATCH 4/5] i2c: i.MX: consolidate code, Sascha Hauer
  • [PATCH 2/5] i2c: i.MX: move disabling of controller out of i2c_fsl_stop, Sascha Hauer
• [PATCH 0/7] i.MX8MQ PCIe/USB DT changes, Andrey Smirnov
  • [PATCH 1/7] PCI: imx6: Add code to request/control "pcie_aux" clock for i.MX8MQ, Andrey Smirnov
  • [PATCH 2/7] ARM: imx8mq: Add node for SRC IP block, Andrey Smirnov
  • [PATCH 3/7] ARM: imx8mq: Add node for GPC IP block, Andrey Smirnov
  • [PATCH 4/7] ARM: imx8mq: Add nodes for PCIE1 and PCIE2 IP blocks, Andrey Smirnov
  • [PATCH 6/7] ARM: dts: imx8mq: Add nodes for USB IP blocks, Andrey Smirnov
  • [PATCH 7/7] ARM: imx8mq-zii-ultra: Add USB related nodes, Andrey Smirnov
    • Re: [PATCH 7/7] ARM: imx8mq-zii-ultra: Add USB related nodes, Lucas Stach
      • Re: [PATCH 7/7] ARM: imx8mq-zii-ultra: Add USB related nodes, Andrey Smirnov
  • [PATCH 5/7] ARM: imx8mq-zii-ultra: Enable PCIE1 and PCIE2, Andrey Smirnov
    • Re: [PATCH 5/7] ARM: imx8mq-zii-ultra: Enable PCIE1 and PCIE2, Lucas Stach
      • Re: [PATCH 5/7] ARM: imx8mq-zii-ultra: Enable PCIE1 and PCIE2, Andrey Smirnov
  • Re: [PATCH 0/7] i.MX8MQ PCIe/USB DT changes, Sascha Hauer
• [PATCH] Documentation: imx8mq-evk: fix firmware path, Christian Hemp
  • Re: [PATCH] Documentation: imx8mq-evk: fix firmware path, Sascha Hauer
• [PATCH] drivers: Drop dummy_porbe(), Andrey Smirnov
  • Re: [PATCH] drivers: Drop dummy_porbe(), Sascha Hauer
  • Re: [PATCH] drivers: Drop dummy_porbe(), Uwe Kleine-König
    • Re: [PATCH] drivers: Drop dummy_porbe(), Sascha Hauer
• [PATCH] include: Drop mem_memmap(), Andrey Smirnov
  • Re: [PATCH] include: Drop mem_memmap(), Sascha Hauer
• [PATCH] commands: uimage: Drop needless variable in uimage_flush(), Andrey Smirnov
  • Re: [PATCH] commands: uimage: Drop needless variable in uimage_flush(), Sascha Hauer
• [PATCH 1/6] fs: Drop needless OOM check, Andrey Smirnov
  • [PATCH 2/6] fs: ramfs: Drop needless OOM check, Andrey Smirnov
  • [PATCH 3/6] fs: Make use of cdev_erase(), Andrey Smirnov
  • [PATCH 4/6] fs: Make use of cdev_flush(), Andrey Smirnov
  • [PATCH 5/6] fs: Drop unused code in fstat(), Andrey Smirnov
  • [PATCH 6/6] fs: Simplify fd to FILE lookup code, Andrey Smirnov
  • Re: [PATCH 1/6] fs: Drop needless OOM check, Sascha Hauer
• [PATCH] ARM: i.MX6UL: liteSOM: depend on DDR controller settings, Marcin Niestroj
  • Re: [PATCH] ARM: i.MX6UL: liteSOM: depend on DDR controller settings, Bartosz Biłas
  • Re: [PATCH] ARM: i.MX6UL: liteSOM: depend on DDR controller settings, Sascha Hauer
    • Re: [PATCH] ARM: i.MX6UL: liteSOM: depend on DDR controller settings, Marcin Niestrój
      • Re: [PATCH] ARM: i.MX6UL: liteSOM: depend on DDR controller settings, Sascha Hauer
• [PATCH] MIPS: ath79: increase malloc size to 8 MiB, Oleksij Rempel
  • Re: [PATCH] MIPS: ath79: increase malloc size to 8 MiB, Sascha Hauer
• [PATCH] usb: imx: Do not disable VBUS on ehci_register()'s success, Andrey Smirnov
  • Re: [PATCH] usb: imx: Do not disable VBUS on ehci_register()'s success, Sascha Hauer
• [PATCH v4 0/11] at91: Support PMC clock bindings, Sam Ravnborg
  • [PATCH v4 02/11] regmap: Implement syscon_regmap_lookup_by_compatible(), Sam Ravnborg
  • [PATCH v4 01/11] arm: at91: fix at91_configure_usart6 warning, Sam Ravnborg
  • [PATCH v4 03/11] clocksource: Do not mix depends and select for ATMEL_PIT, Sam Ravnborg
  • [PATCH v4 04/11] arm: at91: add SOC_SAMA5{D2,D3,D4}, Sam Ravnborg
  • [PATCH v4 05/11] clk: at91: add at91sam9260, Sam Ravnborg
  • [PATCH v4 06/11] clk: at91: add at91sam9rl, Sam Ravnborg
  • [PATCH v4 07/11] clk: at91: add at91sam9x5, Sam Ravnborg
  • [PATCH v4 09/11] clk: at91: add sama5d4, Sam Ravnborg
  • [PATCH v4 08/11] clk: at91: add sama5d2, Sam Ravnborg
  • [PATCH v4 10/11] clk: at91: add dt-compat to PMC bindings, Sam Ravnborg
  • [PATCH v4 11/11] clk: at91: update to PMC bindings, Sam Ravnborg
  • Re: [PATCH v4 0/11] at91: Support PMC clock bindings, Ladislav Michl
  • Re: [PATCH v4 0/11] at91: Support PMC clock bindings, Sascha Hauer
  • Re: [PATCH v4 0/11] at91: Support PMC clock bindings, Ahmad Fatoum
• [PATCH v2] ARM: phyCORE-i.MX8M SOM support, Christian Hemp
  • Re: [PATCH v2] ARM: phyCORE-i.MX8M SOM support, Sam Ravnborg
  • Re: [PATCH v2] ARM: phyCORE-i.MX8M SOM support, Sascha Hauer
• [PATCH] common: console_common: do not store color additions to the log buffer, Oleksij Rempel
  • Re: [PATCH] common: console_common: do not store color additions to the log buffer, Sascha Hauer
• [PATCH v1 1/2] commands: dmesg: add print raw parameter, Oleksij Rempel
  • [PATCH v1 2/2] commands: dmesg: add -l option to restrict output level, Oleksij Rempel
  • Re: [PATCH v1 1/2] commands: dmesg: add print raw parameter, Sascha Hauer
• [PATCH v2] firmware-zynqmp: port from linux, Thomas Hämmerle
  • [PATCH v2] firmware-zynqmp: port from linux, Thomas Hämmerle
    • Re: [PATCH v2] firmware-zynqmp: port from linux, Sascha Hauer
• [PATCH 1/2] imd: create new helper macro to add data from oftree to image meta data, Uwe Kleine-König
  • [PATCH 2/2] ARM: phytec-som-imx6: make use of new imd oftree helper, Uwe Kleine-König
  • Re: [PATCH 1/2] imd: create new helper macro to add data from oftree to image meta data, Sascha Hauer
    • Re: [PATCH 1/2] imd: create new helper macro to add data from oftree to image meta data, Uwe Kleine-König
      • Re: [PATCH 1/2] imd: create new helper macro to add data from oftree to image meta data, Sascha Hauer
• i.MX6ul USB serial downloader and Barebox, Patrick Schneider
  • Re: i.MX6ul USB serial downloader and Barebox, Ahmad Fatoum
  • Re: i.MX6ul USB serial downloader and Barebox, Sascha Hauer
    • AW: i.MX6ul USB serial downloader and Barebox, Patrick Schneider
      • Re: i.MX6ul USB serial downloader and Barebox, Sascha Hauer
        • AW: i.MX6ul USB serial downloader and Barebox, Patrick Schneider
          • Re: i.MX6ul USB serial downloader and Barebox, Sascha Hauer
            • AW: i.MX6ul USB serial downloader and Barebox, Patrick Schneider
              • Re: i.MX6ul USB serial downloader and Barebox, Sascha Hauer
• [PATCH 0/3] VideoCore FDT interop for Raspberry Pi, Tomaz Solc
  • [PATCH 1/3] ARM: start: save end of memory passed to start., Tomaz Solc
  • [PATCH 3/3] commands: add of_bootargs command., Tomaz Solc
    • Re: [PATCH 3/3] commands: add of_bootargs command., Sascha Hauer
      • Re: [PATCH 3/3] commands: add of_bootargs command., Tomaž Šolc
        • Re: [PATCH 3/3] commands: add of_bootargs command., Sascha Hauer
    • Re: [PATCH 3/3] commands: add of_bootargs command., Roland Hieber
  • [PATCH 2/3] ARM: rpi: save fdt that was passed from VideoCore, Tomaz Solc
    • Re: [PATCH 2/3] ARM: rpi: save fdt that was passed from VideoCore, Roland Hieber
• [PATCH 00/25] i.MX8MQ USB support, Andrey Smirnov
  • [PATCH 01/25] usb: xhci-hcd: Tabify the file, Andrey Smirnov
  • [PATCH 02/25] usb: xhci-hcd: Do not zero out DMA coherent memory, Andrey Smirnov
    • Re: [PATCH 02/25] usb: xhci-hcd: Do not zero out DMA coherent memory, Yann Sionneau
      • Re: [PATCH 02/25] usb: xhci-hcd: Do not zero out DMA coherent memory, Andrey Smirnov
      • Re: [PATCH 02/25] usb: xhci-hcd: Do not zero out DMA coherent memory, Sam Ravnborg
  • [PATCH 03/25] usb: xhci-hcd: Cast ~XHCI_IRQS to u32, Andrey Smirnov
  • [PATCH 04/25] usb: xhci-hcd: Make sure to initialize xhci->rings_list, Andrey Smirnov
  • [PATCH 05/25] usb: xhci-hcd: Drop pointless bitwise or, Andrey Smirnov
  • [PATCH 07/25] usb: xhci-hcd: Don't try to DMA sync if buffer is NULL, Andrey Smirnov
  • [PATCH 06/25] usb: xhci-hcd: Add support for 64-byte context size, Andrey Smirnov
  • [PATCH 09/25] usb: xhci-hcd: Convert xhci_submit_normal() to use dma_map_single(), Andrey Smirnov
  • [PATCH 08/25] usb: xhci-hcd: Always wait for "Response Data" completion, Andrey Smirnov
  • [PATCH 10/25] usb: xhci-hcd: Convert xhci_submit_control() to use dma_map_single(), Andrey Smirnov
  • [PATCH 11/25] usb: xhci-hcd: Simplify TRB initialization code, Andrey Smirnov
  • [PATCH 12/25] usb: xhci-hcd: Drop 'dma' field from struct xhci_hcd, Andrey Smirnov
  • [PATCH 14/25] usb: xhci-hcd: Initialize TRT flag for xHCI >= 1.0, Andrey Smirnov
  • [PATCH 15/25] usb: xhci-hcd: Simplify route string building loop, Andrey Smirnov
  • [PATCH 13/25] usb: xhci-hcd: Check usb_pipein(pipe) only once in xhci_submit_normal(), Andrey Smirnov
  • [PATCH 16/25] usb: xhci-hcd: Make use of lo_hi_readq/writeq(), Andrey Smirnov
  • [PATCH 17/25] phy: core: Assume EPROBE_DEFER in of_phy_provider_lookup(), Andrey Smirnov
  • [PATCH 18/25] phy: Port i.MX8MQ USB PHY driver from Linux, Andrey Smirnov
  • [PATCH 20/25] include/usb: Import USB_SPEED_SUPER_PLUS from Linux, Andrey Smirnov
  • [PATCH 19/25] clk: Drop separate definitions of clk_put(), Andrey Smirnov
  • [PATCH 21/25] clk: Import a subset of clk_bulk API from Linux, Andrey Smirnov
  • [PATCH 23/25] lib: Port basic Linux kernel NLS functions, Andrey Smirnov
  • [PATCH 25/25] usb: usb251xb: add usb data lane port swap feature, Andrey Smirnov
  • [PATCH 24/25] usb: Port Microchip USB251x USB hub driver from Linux, Andrey Smirnov
  • [PATCH 22/25] usb: Import DWC3 USB controller driver from Linux, Andrey Smirnov
  • Re: [PATCH 00/25] i.MX8MQ USB support, Sascha Hauer
• [PATCH v2 00/16] ARM: at91: microchip-kz9477-evb: support first stage boot, Ahmad Fatoum
  • [PATCH v2 05/16] ARM: at91: watchdog: implement at91_wdt_disable, Ahmad Fatoum
  • [PATCH v2 11/16] ARM: at91: sama5: specify 0x10000 as first stage max size, Ahmad Fatoum
  • [PATCH v2 07/16] ARM: at91: import early_udelay from at91bootstrap, Ahmad Fatoum
    • Re: [PATCH v2 07/16] ARM: at91: import early_udelay from at91bootstrap, Sascha Hauer
      • Re: [PATCH v2 07/16] ARM: at91: import early_udelay from at91bootstrap, Sascha Hauer
  • [PATCH v2 01/16] LICENSES: add BSD-1-Clause license, Ahmad Fatoum
  • [PATCH v2 03/16] ARM: at91: migrate at91sam9_ddrsdr.h to use at91bootstrap's at91_ddrsdrc.h, Ahmad Fatoum
  • [PATCH v2 09/16] ARM: at91: import lowlevel dbgu UART init code from at91bootstrap, Ahmad Fatoum
  • [PATCH v2 10/16] images: at91: differentiate between first and second stage images, Ahmad Fatoum
  • [PATCH v2 12/16] ARM: at91: microchip-ksz9477-evb: use compressed DTB, Ahmad Fatoum
  • [PATCH v2 06/16] ARM: at91: import lowlevel clock initialization from at91bootstrap, Ahmad Fatoum
    • Re: [PATCH v2 06/16] ARM: at91: import lowlevel clock initialization from at91bootstrap, Sascha Hauer
  • [PATCH v2 02/16] ARM: at91: import at91bootstrap's at91_ddrsdrc.h, Ahmad Fatoum
    • Re: [PATCH v2 02/16] ARM: at91: import at91bootstrap's at91_ddrsdrc.h, Roland Hieber
      • Re: [PATCH v2 02/16] ARM: at91: import at91bootstrap's at91_ddrsdrc.h, Ahmad Fatoum
  • [PATCH v2 04/16] ARM: at91: replace at91sam9_ddrsdr.h with at91bootstrap's at91_ddrsdrc.h, Ahmad Fatoum
    • Re: [PATCH v2 04/16] ARM: at91: replace at91sam9_ddrsdr.h with at91bootstrap's at91_ddrsdrc.h, Sascha Hauer
  • [PATCH v2 15/16] ARM: at91: microchip-ksz9477: provide board code fallback, Ahmad Fatoum
    • Re: [PATCH v2 15/16] ARM: at91: microchip-ksz9477: provide board code fallback, Sascha Hauer
  • [PATCH v2 14/16] ARM: at91: microchip-ksz9477-evb: implement first stage, Ahmad Fatoum
    • Re: [PATCH v2 14/16] ARM: at91: microchip-ksz9477-evb: implement first stage, Roland Hieber
      • Re: [PATCH v2 14/16] ARM: at91: microchip-ksz9477-evb: implement first stage, Ahmad Fatoum
  • [PATCH v2 13/16] ARM: dts: microchip-ksz9477-evb: add dummy first stage device tree, Ahmad Fatoum
  • [PATCH v2 16/16] doc: microchip-ksz9477-evb: add documentation, Ahmad Fatoum
  • [PATCH v2 08/16] ARM: at91: import low level DDRAMC initialization code from at91bootstrap, Ahmad Fatoum
  • Re: [PATCH v2 00/16] ARM: at91: microchip-kz9477-evb: support first stage boot, Sam Ravnborg
• [PATCH] fixup! scripts/checkpatch.pl: rebase on top of upstream v5.0-rc6, Ahmad Fatoum
  • Re: [PATCH] fixup! scripts/checkpatch.pl: rebase on top of upstream v5.0-rc6, Sascha Hauer
• [PATCH v2 0/2] LICENSES: adopt Linux-like LICENSES directory structure, Ahmad Fatoum
  • [PATCH v2 1/2] LICENSES: adopt Linux-like LICENSES directory structure, Ahmad Fatoum
    • Re: [PATCH v2 1/2] LICENSES: adopt Linux-like LICENSES directory structure, Sascha Hauer
  • [PATCH v2 2/2] scripts/checkpatch.pl: rebase on top of upstream v5.0-rc6, Ahmad Fatoum
    • Re: [PATCH v2 2/2] scripts/checkpatch.pl: rebase on top of upstream v5.0-rc6, Antony Pavlov
      • Re: [PATCH v2 2/2] scripts/checkpatch.pl: rebase on top of upstream v5.0-rc6, Sascha Hauer
      • Re: [PATCH v2 2/2] scripts/checkpatch.pl: rebase on top of upstream v5.0-rc6, Ahmad Fatoum
        • Re: [PATCH v2 2/2] scripts/checkpatch.pl: rebase on top of upstream v5.0-rc6, Antony Pavlov
          • Re: [PATCH v2 2/2] scripts/checkpatch.pl: rebase on top of upstream v5.0-rc6, Ahmad Fatoum
• [PATCH 1/2] images: pbl: verify CONFIG_BAREBOX_MAX_IMAGE_SIZE is not exceeded, Ahmad Fatoum
  • [PATCH 2/2] images: allow overriding BAREBOX_MAX_IMAGE_SIZE from arch Kconfig, Ahmad Fatoum
  • Re: [PATCH 1/2] images: pbl: verify CONFIG_BAREBOX_MAX_IMAGE_SIZE is not exceeded, Ahmad Fatoum
  • Re: [PATCH 1/2] images: pbl: verify CONFIG_BAREBOX_MAX_IMAGE_SIZE is not exceeded, Ahmad Fatoum
    • Re: [PATCH 1/2] images: pbl: verify CONFIG_BAREBOX_MAX_IMAGE_SIZE is not exceeded, Sascha Hauer
      • Re: [PATCH 1/2] images: pbl: verify CONFIG_BAREBOX_MAX_IMAGE_SIZE is not exceeded, Ahmad Fatoum
• [PATCH 0/4] ARM: at91: misc fixes and cleanup, Ahmad Fatoum
  • [PATCH 3/4] ARM: at91: fix at91sama5_get_ddram_size for sama5d4, Ahmad Fatoum
  • [PATCH 2/4] ARM: at91: debug_ll: make UART base address configurable, Ahmad Fatoum
    • Re: [PATCH 2/4] ARM: at91: debug_ll: make UART base address configurable, Sam Ravnborg
      • Re: [PATCH 2/4] ARM: at91: debug_ll: make UART base address configurable, Ahmad Fatoum
        • Re: [PATCH 2/4] ARM: at91: debug_ll: make UART base address configurable, Ahmad Fatoum
        • Re: [PATCH 2/4] ARM: at91: debug_ll: make UART base address configurable, Sam Ravnborg
        • Re: [PATCH 2/4] ARM: at91: debug_ll: make UART base address configurable, Sascha Hauer
          • Re: [PATCH 2/4] ARM: at91: debug_ll: make UART base address configurable, Ahmad Fatoum
  • [PATCH 1/4] ARM: at91: replace __raw_{readl, writel} of peripherals with readl, writel, Ahmad Fatoum
  • [PATCH 4/4] ARM: at91: remove duplicate get_ddram_size code, Ahmad Fatoum
    • Re: [PATCH 4/4] ARM: at91: remove duplicate get_ddram_size code, Sam Ravnborg
      • Re: [PATCH 4/4] ARM: at91: remove duplicate get_ddram_size code, Ahmad Fatoum
        • Re: [PATCH 4/4] ARM: at91: remove duplicate get_ddram_size code, Ahmad Fatoum
• [PATCH 0/2] scripts/dtc: Update to upstream version v1.4.7, Ahmad Fatoum
  • [PATCH 1/2] scripts/dtc: fix update-dtc-source.sh for barebox use, Ahmad Fatoum
  • [PATCH 2/2] scripts/dtc: Update to upstream version v1.4.7, Ahmad Fatoum
  • Re: [PATCH 0/2] scripts/dtc: Update to upstream version v1.4.7, Sascha Hauer
• [PATCH] ARM: dts: imx6*phytec*: switch to new partitioning scheme, Uwe Kleine-König
  • Re: [PATCH] ARM: dts: imx6*phytec*: switch to new partitioning scheme, Stefan Riedmüller
    • [PATCH v2] ARM: dts: imx6*phytec*: switch to new partitioning scheme, Uwe Kleine-König
      • Re: [PATCH v2] ARM: dts: imx6*phytec*: switch to new partitioning scheme, Stefan Riedmüller
        • [PATCH v3] ARM: dts: imx6*phytec*: switch to new partitioning scheme, Uwe Kleine-König
          • Re: [PATCH v3] ARM: dts: imx6*phytec*: switch to new partitioning scheme, Stefan Riedmüller
          • Re: [PATCH v3] ARM: dts: imx6*phytec*: switch to new partitioning scheme, Sascha Hauer
• [PATCH v3 0/9] at91: Support PMC clock bindings, Sam Ravnborg
  • [PATCH v3 1/9] arm: at91: fix at91_configure_usart6 warning, Sam Ravnborg
  • [PATCH v3 2/9] clocksource: Do not mix depends and select for ATMEL_PIT, Sam Ravnborg
  • [PATCH v3 3/9] arm: at91: add SOC_SAMA5{D3,D4}, Sam Ravnborg
  • [PATCH v3 5/9] clk: at91: add at91sam9rl, Sam Ravnborg
  • [PATCH v3 6/9] clk: at91: add at91sam9x5, Sam Ravnborg
  • [PATCH v3 4/9] clk: at91: add at91sam9260, Sam Ravnborg
  • [PATCH v3 7/9] clk: at91: add sama5d2, Sam Ravnborg
  • [PATCH v3 8/9] clk: at91: add sama5d4, Sam Ravnborg
  • [PATCH v3 9/9] clk: at91: update to PMC bindings, Sam Ravnborg
    • Re: [PATCH v3 9/9] clk: at91: update to PMC bindings, Ahmad Fatoum
      • [PATCH] fixup! clk: at91: update to PMC bindings, Ahmad Fatoum
        • [PATCH] regmap: Implement syscon_regmap_lookup_by_compatible(), Ahmad Fatoum
        • Re: [PATCH] fixup! clk: at91: update to PMC bindings, Sam Ravnborg
          • Re: [PATCH] fixup! clk: at91: update to PMC bindings, Ahmad Fatoum
• [PATCH] genenv: create a gcc-like .d file for depenencies., Tomaz Solc
  • Re: [PATCH] genenv: create a gcc-like .d file for depenencies., Sascha Hauer
    • Re: [PATCH] genenv: create a gcc-like .d file for depenencies., Tomaž Šolc
      • Re: [PATCH] genenv: create a gcc-like .d file for depenencies., Sascha Hauer
        • Re: [PATCH] genenv: create a gcc-like .d file for depenencies., Tomaž Šolc
          • Re: [PATCH] genenv: create a gcc-like .d file for depenencies., Sascha Hauer
• [PATCH v2 0/8] Fixing MMC access on Raspberry Pi CM3, Tomaz Solc
  • [PATCH v2 5/8] mci: bcm2835: use device_initcall(), not coredev., Tomaz Solc
  • [PATCH v2 8/8] ARM: rpi: add CONFIG_PINCTRL to rpi_defconfig., Tomaz Solc
  • [PATCH v2 6/8] mci: bcm2835: parse other device tree properties., Tomaz Solc
  • [PATCH v2 7/8] ARM: rpi: Add device tree for Compute Module 3., Tomaz Solc
  • [PATCH v2 1/8] ARM: rpi: switch emmc from sdhost to sdhci, Tomaz Solc
  • [PATCH v2 2/8] Kconfig: add pin controllers submenu., Tomaz Solc
  • [PATCH v2 3/8] pinctrl: bcm2835: move existing code from gpio., Tomaz Solc
  • [PATCH v2 4/8] pinctrl: bcm2835: register the pin controller., Tomaz Solc
  • Re: [PATCH v2 0/8] Fixing MMC access on Raspberry Pi CM3, Sascha Hauer
• [PATCH v1 1/4] MIPS: relocation: pass ram size to pbl_main_entry, Oleksij Rempel
  • [PATCH v1 3/4] MIPS: relocation: do not use configurable memory layout, Oleksij Rempel
  • [PATCH v1 4/4] MIPS: remove request_sdram_region "fdt", Oleksij Rempel
  • [PATCH v1 2/4] MIPS: relocation: add relocation support, Oleksij Rempel
    • Re: [PATCH v1 2/4] MIPS: relocation: add relocation support, Peter Mamonov
      • Re: [PATCH v1 2/4] MIPS: relocation: add relocation support, Oleksij Rempel
  • Re: [PATCH v1 1/4] MIPS: relocation: pass ram size to pbl_main_entry, Oleksij Rempel
    • Re: [PATCH v1 1/4] MIPS: relocation: pass ram size to pbl_main_entry, Antony Pavlov
      • Re: [PATCH v1 1/4] MIPS: relocation: pass ram size to pbl_main_entry, Oleksij Rempel
• [PATCH v3] Documentation: add watchdog documentation, Oleksij Rempel
  • Re: [PATCH v3] Documentation: add watchdog documentation, Tomaž Šolc
    • Re: [PATCH v3] Documentation: add watchdog documentation, Oleksij Rempel
      • Re: [PATCH v3] Documentation: add watchdog documentation, Tomaž Šolc
        • Re: [PATCH v3] Documentation: add watchdog documentation, Oleksij Rempel
  • <Possible follow-ups>
  • [PATCH v3] Documentation: add watchdog documentation, Oleksij Rempel
    • Re: [PATCH v3] Documentation: add watchdog documentation, Sascha Hauer
• [PATCH v2] Documentation: add watchdog documentation, Oleksij Rempel
  • Re: [PATCH v2] Documentation: add watchdog documentation, Oleksij Rempel
• [PATCH v2 0/9] at91: Support PMC clock bindings, Sam Ravnborg
  • [PATCH v2 3/9] arm: at91: add SOC_SAMA5{D3,D4}, Sam Ravnborg
  • [PATCH v2 2/9] arm: at91: fix at91_configure_usart6 warning, Sam Ravnborg
  • [PATCH v2 1/9] clocksource: Do not mix depends and select for ATMEL_PIT, Sam Ravnborg
  • [PATCH v2 5/9] clk: at91: add at91sam9rl, Sam Ravnborg
  • [PATCH v2 6/9] clk: at91: add at91sam9x5, Sam Ravnborg
  • [PATCH v2 4/9] clk: at91: add at91sam9260, Sam Ravnborg
  • [PATCH v2 8/9] clk: at91: add sama5d4, Sam Ravnborg
  • [PATCH v2 7/9] clk: at91: add sama5d2, Sam Ravnborg
  • [PATCH v2 9/9] clk: at91: update to new bindings, Sam Ravnborg
  • Re: [PATCH v2 0/9] at91: Support PMC clock bindings, Sam Ravnborg
    • Re: [PATCH v2 0/9] at91: Support PMC clock bindings, Ladislav Michl
      • Re: [PATCH v2 0/9] at91: Support PMC clock bindings, Sam Ravnborg
  • Re: [PATCH v2 0/9] at91: Support PMC clock bindings, Sascha Hauer
    • Re: [PATCH v2 0/9] at91: Support PMC clock bindings, Sam Ravnborg
      • Re: [PATCH v2 0/9] at91: Support PMC clock bindings, Sascha Hauer
        • Re: [PATCH v2 0/9] at91: Support PMC clock bindings, Sam Ravnborg
          • Re: [PATCH v2 0/9] at91: Support PMC clock bindings, Sascha Hauer
        • Re: [PATCH v2 0/9] at91: Support PMC clock bindings, Ladislav Michl
• [PATCH 0/8] Bootchooser Documentation Update, Enrico Jorns
  • [PATCH 6/8] doc: bootchooser: be more explicit about when the bootchooser terminates, Enrico Jorns
  • [PATCH 4/8] doc: bootchooser: be more explicit about attempts reset on successful boot, Enrico Jorns
  • [PATCH 2/8] doc: bootchooser: explicitly note configuration vs. storage backend, Enrico Jorns
  • [PATCH 5/8] doc: bootchooser: note how to actually start the bootchooser, Enrico Jorns
  • [PATCH 3/8] doc: bootchooser: be more explicit what bootchooser.state_prefix is for, Enrico Jorns
  • [PATCH 1/8] doc: bootchooser: fix typos etc., Enrico Jorns
  • [PATCH 7/8] doc: bootchooser: add details about bootchooser.reset_attempts handling, Enrico Jorns
  • [PATCH 8/8] doc: bootchooser: add retry handling to algorithm description, Enrico Jorns
  • Re: [PATCH 0/8] Bootchooser Documentation Update, Sascha Hauer
• [PATCH v2 0/4] add (U)EFI watchdog, Oleksij Rempel
  • [PATCH v2 3/4] efi_defconfig: enable watchdog support, Oleksij Rempel
  • [PATCH v2 1/4] efi: add prototype and definition for set_watchdog_timer, Oleksij Rempel
  • [PATCH v2 4/4] Documentation: efi: provide (U)EFI watchdog documentation, Oleksij Rempel
  • [PATCH v2 2/4] watchdog: add (U)EFI driver, Oleksij Rempel
  • Re: [PATCH v2 0/4] add (U)EFI watchdog, Sascha Hauer
• [PATCH] Documentation: add watchdog documentation, Oleksij Rempel
  • Re: [PATCH] Documentation: add watchdog documentation, Roland Hieber
• [PATCH] watchdog: fix WATCHDOG_POLLER menuconfig, Oleksij Rempel
  • Re: [PATCH] watchdog: fix WATCHDOG_POLLER menuconfig, Sascha Hauer
• [PATCH] efi: cleanups, Oleksij Rempel
  • Re: [PATCH] efi: cleanups, Roland Hieber
  • Re: [PATCH] efi: cleanups, Sascha Hauer
• [PATCH] watchdog: bcm2835: set timeout_max., Tomaz Solc
  • Re: [PATCH] watchdog: bcm2835: set timeout_max., Sascha Hauer
• [PATCH 0/7] Fixing MMC access on Raspberry Pi CM3, Tomaz Solc
  • [PATCH 1/7] ARM: rpi: switch emmc from sdhost to sdhci, Tomaz Solc
  • [PATCH 2/7] Kconfig: add pin controllers submenu., Tomaz Solc
  • [PATCH 5/7] mci: move after pinctrl in link order., Tomaz Solc
    • Re: [PATCH 5/7] mci: move after pinctrl in link order., Andrey Smirnov
    • Re: [PATCH 5/7] mci: move after pinctrl in link order., Sascha Hauer
      • Re: [PATCH 5/7] mci: move after pinctrl in link order., Tomaž Šolc
  • [PATCH 3/7] pinctrl: bcm2835: move existing code from gpio., Tomaz Solc
  • [PATCH 7/7] ARM: rpi: Add device tree for Compute Module 3., Tomaz Solc
    • Re: [PATCH 7/7] ARM: rpi: Add device tree for Compute Module 3., Roland Hieber
  • [PATCH 6/7] mci: bcm2835: parse other device tree properties., Tomaz Solc
  • [PATCH 4/7] pinctrl: bcm2835: register the pin controller., Tomaz Solc
• [PATCH] kbuild: Add missing semicolon, Sascha Hauer
• v2019.02.0, Sascha Hauer
• Usage of mender - updating back to u-boot, Patrick Schneider
  • Re: Usage of mender - updating back to u-boot, Andrey Smirnov
• [PATCH] commands: nandtest: provide readonly test, Jan Remmet
  • Re: [PATCH] commands: nandtest: provide readonly test, Sascha Hauer
• [PATCH v2 1/7] drivers: bus: Add ti-sysc bus driver, Teresa Remmet
  • [PATCH v2 3/7] arm: configs: am33xx_mlo_defconfig: Enable ti-sysc bus driver, Teresa Remmet
  • [PATCH v2 2/7] arm: configs: omap_defconfig: Enable ti-sysc bus driver, Teresa Remmet
  • [PATCH v2 4/7] drivers: of: Add function to enable and register a device by alias, Teresa Remmet
  • [PATCH v2 5/7] arm: mach-omap: am335x_generic: Enable nodes by alias where needed, Teresa Remmet
  • [PATCH v2 6/7] net: ethernet: cpsw: cpsw-phy-sel: Use phandle for phy sel, Teresa Remmet
  • [PATCH v2 7/7] arm: dts: am335x-phytec: Use phy-handle instead of phy_id, Teresa Remmet
  • Re: [PATCH v2 1/7] drivers: bus: Add ti-sysc bus driver, Sascha Hauer
• [PATCH] ARM: i.MX8MQ: Check CPU type in imx8mq_init_syscnt_frequency(), Andrey Smirnov
  • Re: [PATCH] ARM: i.MX8MQ: Check CPU type in imx8mq_init_syscnt_frequency(), Sascha Hauer
• [PATCH v2] ARM: i.MX8MQ: Add code to report HDMI/eDP firmware version, Andrey Smirnov
  • Re: [PATCH v2] ARM: i.MX8MQ: Add code to report HDMI/eDP firmware version, Sascha Hauer
• [PATCH v2 1/2] of: base: add helper to rename a node, Marco Felsch
  • [PATCH v2 2/2] memory: of_fixup: adapt to new memory layout, Marco Felsch
  • Re: [PATCH v2 1/2] of: base: add helper to rename a node, Sascha Hauer
• [PATCH] ARM: rpi: avoid NULL dereference on unknown rev., Tomaz Solc
  • Re: [PATCH] ARM: rpi: avoid NULL dereference on unknown rev., Sascha Hauer
• cortex-m4 in Barebox, Yazdani, Reyhaneh
  • Re: cortex-m4 in Barebox, Oleksij Rempel
• Barebox support for Arm Cortex-M0 Boards, Kai Che
  • Re: Barebox support for Arm Cortex-M0 Boards, Roland Hieber
    • Re: Barebox support for Arm Cortex-M0 Boards, Oleksij Rempel
  • Re: Barebox support for Arm Cortex-M0 Boards, Antony Pavlov
• [PATCH 0/8] NVME support, Andrey Smirnov
  • [PATCH 1/8] PCI: Fix to_pci_dev() macro, Andrey Smirnov
  • [PATCH 2/8] PCI: Introduce device_pci_driver(), Andrey Smirnov
  • [PATCH 3/8] drivers: Make use of device_pci_driver(), Andrey Smirnov
  • [PATCH 5/8] include: Add definitnion for HZ, Andrey Smirnov
  • [PATCH 7/8] include: Import min_not_zero() macro from Linux, Andrey Smirnov
  • [PATCH 6/8] include: Import uuid.h for Linux, Andrey Smirnov
  • [PATCH 8/8] drivers: Import a very basic NVME implementation from Linux, Andrey Smirnov
  • [PATCH 4/8] include: Sync up pci_ids.h with 4.20-rc1, Andrey Smirnov
  • Re: [PATCH 0/8] NVME support, Sascha Hauer
• [PATCH] nvmem: eeprom_93xx46: fix whitespaces, Antony Pavlov
  • Re: [PATCH] nvmem: eeprom_93xx46: fix whitespaces, Sascha Hauer
• [PATCH] ARM: i.MX8MQ: Add code to report HDMI/eDP firmware version, Andrey Smirnov
  • Re: [PATCH] ARM: i.MX8MQ: Add code to report HDMI/eDP firmware version, Lucas Stach
    • Re: [PATCH] ARM: i.MX8MQ: Add code to report HDMI/eDP firmware version, Andrey Smirnov
• [PATCH 1/3] ARM: i.MX8MQ: Invert the logic in imx8mq_cpu_revision(), Andrey Smirnov
  • [PATCH 3/3] ARM: i.MX8MQ: Add corner case for Rev 2.1 silicon, Andrey Smirnov
  • [PATCH 2/3] ARM: i.MX8MQ: Read only ROM version major, Andrey Smirnov
  • Re: [PATCH 1/3] ARM: i.MX8MQ: Invert the logic in imx8mq_cpu_revision(), Sascha Hauer
• [PATCH] net: phy: micrel: backport ksz9031 125MHz ref-clk workaround, Marco Felsch
  • Re: [PATCH] net: phy: micrel: backport ksz9031 125MHz ref-clk workaround, Sascha Hauer
• [PATCH 1/2] of: base: add helper to rename a node, Marco Felsch
  • [PATCH 2/2] memory: of_fixup: adapt to new memory layout, Marco Felsch
    • Re: [PATCH 2/2] memory: of_fixup: adapt to new memory layout, Sascha Hauer
      • Re: [PATCH 2/2] memory: of_fixup: adapt to new memory layout, Marco Felsch
        • Re: [PATCH 2/2] memory: of_fixup: adapt to new memory layout, Sascha Hauer
          • Re: [PATCH 2/2] memory: of_fixup: adapt to new memory layout, Marco Felsch
  • Re: [PATCH 1/2] of: base: add helper to rename a node, Sascha Hauer
    • Re: [PATCH 1/2] of: base: add helper to rename a node, Marco Felsch
• [PATCH 0/7] Add ti-sysc bus driver, Teresa Remmet
  • [PATCH 2/7] arm: configs: omap_defconfig: Enable ti-sysc bus driver, Teresa Remmet
  • [PATCH 1/7] drivers: bus: Add ti-sysc bus driver, Teresa Remmet
    • Re: [PATCH 1/7] drivers: bus: Add ti-sysc bus driver, Sam Ravnborg
      • Re: [PATCH 1/7] drivers: bus: Add ti-sysc bus driver, Sascha Hauer
        • Re: [PATCH 1/7] drivers: bus: Add ti-sysc bus driver, Teresa Remmet
          • Re: [PATCH 1/7] drivers: bus: Add ti-sysc bus driver, Sam Ravnborg
    • Re: [PATCH 1/7] drivers: bus: Add ti-sysc bus driver, Andrey Smirnov
      • Re: [PATCH 1/7] drivers: bus: Add ti-sysc bus driver, Teresa Remmet
        • Re: [PATCH 1/7] drivers: bus: Add ti-sysc bus driver, Andrey Smirnov
          • Re: [PATCH 1/7] drivers: bus: Add ti-sysc bus driver, Teresa Remmet
    • Re: [PATCH 1/7] drivers: bus: Add ti-sysc bus driver, Sascha Hauer
      • Re: [PATCH 1/7] drivers: bus: Add ti-sysc bus driver, Teresa Remmet
  • [PATCH 3/7] arm: configs: am33xx_mlo_defconfig: Enable ti-sysc bus driver, Teresa Remmet
  • [PATCH 4/7] drivers: of: Add function to enable and register a device by alias, Teresa Remmet
  • [PATCH 5/7] arm: mach-omap: am335x_generic: Enable nodes by alias where needed, Teresa Remmet
  • [PATCH 6/7] net: ethernet: cpsw: cpsw-phy-sel: Use phandle for phy sel, Teresa Remmet
  • [PATCH 7/7] arm: dts: am335x-phytec: Use phy-handle instead of phy_id, Teresa Remmet
• Accessing MMC/SD card storage on Raspberry Pi, Tomaž Šolc
  • Re: Accessing MMC/SD card storage on Raspberry Pi, Roland Hieber
    • Re: Accessing MMC/SD card storage on Raspberry Pi, Tomaž Šolc
• AM335x broken, Teresa Remmet
  • Re: AM335x broken, Sascha Hauer
    • Re: AM335x broken, Teresa Remmet
• [PATCH] firmware-zynqmp: port from linux, Thomas Hämmerle
  • Re: [PATCH] firmware-zynqmp: port from linux, Sascha Hauer
    • Re: [PATCH] firmware-zynqmp: port from linux, Thomas Hämmerle
      • Re: [PATCH] firmware-zynqmp: port from linux, Sascha Hauer
• mci: SDHC generic driver? refactor dove-sdhci?, Yann Sionneau
  • Re: mci: SDHC generic driver? refactor dove-sdhci?, Sascha Hauer
• [PATCH v1] Documentation: efi: provide watchdog documentation, Oleksij Rempel
• [PATCH 0/7] Harmonize barebox' and dt-utils' state code, Ulrich Ölmann
  • [PATCH 1/7] common: state: fix compiler warnings about wrong type conversion in messages, Ulrich Ölmann
  • [PATCH 3/7] common: state: fix formatting of "uint32_t" variables, Ulrich Ölmann
  • [PATCH 7/7] common: state: harmonize code with dt-utils, Ulrich Ölmann
  • [PATCH 5/7] common: state: harmonize code with dt-utils, Ulrich Ölmann
  • [PATCH 4/7] common: state: harmonize code with dt-utils, Ulrich Ölmann
  • [PATCH 6/7] common: state: harmonize code with dt-utils, Ulrich Ölmann
  • [PATCH 2/7] common: state: fix formatting of "off_t" variables, Ulrich Ölmann
  • Re: [PATCH 0/7] Harmonize barebox' and dt-utils' state code, Sascha Hauer
• [PATCH v1] MIPS: ath79: art: fix SPDX-License-Identifier, Oleksij Rempel
  • Re: [PATCH v1] MIPS: ath79: art: fix SPDX-License-Identifier, Sascha Hauer
    • Re: [PATCH v1] MIPS: ath79: art: fix SPDX-License-Identifier, Oleksij Rempel
• [PATCH 1/6] include: add SPDX GPL-2.0-only license tags where applicable, Roland Hieber
  • [PATCH 4/6] include: add SPDX LGPL-2.1-or-later license tags where applicable, Roland Hieber
  • [PATCH 2/6] include: add SPDX GPL-2.0-or-later license tags where applicable, Roland Hieber
  • [PATCH 5/6] include: spi: add SPDX GPL-2.0-or-later license tags where applicable, Roland Hieber
  • [PATCH 3/6] include: add SPDX GPL-2.0-only license tags for files without licensing information, Roland Hieber
  • [PATCH 6/6] include: spi: add SPDX GPL-2.0-only license tags for files without licensing information, Roland Hieber
  • Re: [PATCH 1/6] include: add SPDX GPL-2.0-only license tags where applicable, Oleksij Rempel
    • Re: [PATCH 1/6] include: add SPDX GPL-2.0-only license tags where applicable, Roland Hieber
      • Re: [PATCH 1/6] include: add SPDX GPL-2.0-only license tags where applicable, Ahmad Fatoum
        • Re: [PATCH 1/6] include: add SPDX GPL-2.0-only license tags where applicable, Roland Hieber
          • Re: [PATCH 1/6] include: add SPDX GPL-2.0-only license tags where applicable, Ahmad Fatoum
            • Re: [PATCH 1/6] include: add SPDX GPL-2.0-only license tags where applicable, Roland Hieber
              • Re: [PATCH 1/6] include: add SPDX GPL-2.0-only license tags where applicable, Roland Hieber
      • Re: [PATCH 1/6] include: add SPDX GPL-2.0-only license tags where applicable, Roland Hieber
    • Re: [PATCH 1/6] include: add SPDX GPL-2.0-only license tags where applicable, Roland Hieber