Hi All,
v2019.05.0 is out. This time we gained initial Layerscape support (for
the LS1046a) and initial very basic STM32MP1 support. What I like best
for this release is the improved pstore support. With pstore it's
possible to access the last kernel log, possibly including oopses and
panics. Also the barebox log is accessible from the running kernel.
pstore has been present before, but with this release we got the device
tree bindings, so now it's only a matter of putting the right thing
into the device tree to use pstore. Give it a try, it's nice ;)
Sascha
-------------------------8<--------------------------
Alexander Kurz (4):
ARM Kindle3 defconfig: enable MMU
ARM Kindle3: switch on pull-ups for fiveway device
ARM: i.MX: extend kindle-mx50 defconfig
ARM: Makefile.imx: group and sort board entries
Alexander Shiyan (1):
drivers: video: Fix parsing oftree timings
Andrey Smirnov (56):
libfile: Make failure path of open_and_lseek() consistent
common: Always return enum filetype in file_name_detect_type_offset()
MIPS: ath79: Use errno to get error code from open_and_lseek()
ARM: i.MX: bbu: Fix variable type in imx_bbu_external_nand_update()
ARM: i.MX: bbu: Fix lseek error check in imx_bbu_external_nand_update()
ARM: i.MX: bbu: Fix lseek error check in imx_bbu_internal_v2_write_nand_dbbt()
ARM: i.MX: bbu: Fix variable type in imx_bbu_internal_v2_write_nand_dbbt()
bpkfs: Fix lseek error check in bpkfs_probe()
uimage: Fix lseek error check in uimage_verify()
uimage: Fix lseek error check in uimage_load()
uimage: Fix lseek error check in uimage_load_to_buf()
state: Fix lseek error check in state_backend_bucket_direct_read()
state: Fix lseek error check in state_backend_bucket_direct_write()
state: Fix lseek error check in state_mtd_peb_read()
state: Fix lseek error check in state_mtd_peb_write()
commands: loadxy: Make use of open_and_lseek()
usb: storage: Simplify memory allocation in usb_stor_probe()
usb: storage: Replace custom debug tracing with dev_dbg
usb: storage: Don't use "unsigned long" for 32-bit values
usb: storage: Make usb_stor_read_capacity() a standalone function
usb: storage: Make usb_stor_inquiry() a standalone function
usb: storage: Make usb_stor_test_unit_ready() a standalone function
usb: storage: Make usb_stor_read_10() a standalone function
usb: storage: Make usb_stor_write_10() a standalone function
usb: storage: Drop extra call to transport in usb_stor_write_10()
usb: storage: Share code for READ(10) and WRITE(10)
usb: storage: Make usb_stor_request_sense() a standalone function
usb: storage: Remove unused variables
usb: storage: Drop struct SCSI_cmd_block
usb: hub: Do not include <scsi.h>
ata: ahci: Do not include <scsi.h>
usb: storage: Drop unused fields in struct us_data
usb: storage: Drop unused us_blkdev_list
usb: storage: Introduce usb_stor_transport()
usb: storage: Use put_unaligned_be* helpers
usb: Drop usb_disable_asynch()
usb: storage: Drop unnecessary check in usb_stor_blk_io()
usb: storage: Drop needless macro
usb: storage: Use simple boolean to speficy read vs. write operation
usb: storage: Simplify I/O loop in usb_stor_blk_io()
usb: storage: Drop unnecessary assignment
usb: storage: Inline usb_limit_blk_cnt()
commands: loadb: Make use of open_and_lseek()
fs: ramfs: Drop unused 'handle' filed from struct ramfs_inode
fs: ramfs: Drop unused 'chunks' conter
fs: ramfs: Drop unnecessary check in ramfs_mknod()
ARM: zii-vf610-dev: Add ZII SPB4 board
ARM: zii-vf610-dev: Switch SCU4 AIB board to use upstream DTS
commands: memcpy: Make use of write_full()
commands: memcpy: Make use of min_t()
libfile: Make use of write_full() in copy_file()
ARM: i.MX7: Make sure CNTFRQ is initialized early enough
ARM: i.MX8MQ: Don't use cpu_is_mx8mq() at core_initcall level
usb: dwc3: Toggle GCTL.CORESOFTRESET as a first step
ARM: zii-common: introduce RDU part-number based fixup abstraction
ARM: rdu2: patch DSA config
Bastian Krause (1):
common: extend BOOTM_FITIMAGE_SIGNATURE help text
Christian Hemp (1):
ARM: dts: mx8mq-phytec-phycore-som: Add watchdog
Greg Hackmann (1):
pstore/ram: add Device Tree bindings
Ian Abbott (1):
clk: socfpga: fix compiler warnings for Cyclone5
Juergen Borleis (1):
pstore/doc: fix layout
Kees Cook (9):
ramoops: use DT reserved-memory bindings
pstore: Make ramoops_init_przs generic for other prz arrays
pstore/ram: Do not use stack VLA for parity workspace
pstore: improve error report for failed setup
pstore/ram: Clarify resource reservation labels
pstore: Extract common arguments into structure
pstore: Switch pstore_mkfile to pass record
pstore: Replace arguments for read() API
pstore: Replace arguments for write() API
Lucas Stach (6):
ARM: add Zii common directory and move switch reset command
ARM: zii-common: add support for switch reset on RDU1
ARM: zii-common: fetch network config from SP
ARM: rdu2: Add p/n based fixups for touchscreen and display panel
ARM: zii-common: reuse i210 config check for RDU3
ARM: zii-imx8mq-dev: select ZII_COMMON
Masahiro Yamada (2):
linux/kernel.h: split *_MAX and *_MIN macros into <linux/limits.h>
treewide: surround Kconfig file paths with double quotes
Michael Tretter (5):
ARM: zynqmp: move PAYLOAD_ARG_CNT to firmware header
clk: add ZynqMP clock driver
ARM: zynqmp: switch to firmware clock driver
commands: unify newlines for options
ARM: aarch64: do not use 32bit optimized find bit functions
Philipp Zabel (4):
ramoops: probe from device tree if OFTREE is enabled
pstore: add console support
pstore: pass ramoops configuration to kernel via device tree
pstore: ramoops: allow zapping invalid buffers in read-only mode
Rouven Czerwinski (1):
ARM: imx: disable IPU QoS setup for correct SoCs
Sascha Hauer (61):
clk: clk-composite: return parent_rate if no rate clk
clk: parent_names should be const
clk: export clk_gate_is_enabled()
clk: Make CLK_IGNORE_UNUSED generic
clk: Support CLK_IS_CRITICAL flag
clk: divider: pass divider flags
clk: divider: Support CLK_DIVIDER_READ_ONLY flag
clk: mux: Support mux specific flags
clk: mux: Support CLK_MUX_READ_ONLY flag
clk: mux: Support CLK_SET_RATE_NO_REPARENT flag
ARM: stm32mp1: Add clk driver
ARM: stm32mp1: Add serial driver
clocksource: Enable architected timer support for CPU_V7
net: phy: Add PHY_ID_MATCH_* macros
net: phy: Add register access helper functions for phys
realtek phy driver
ARM: Add initial STM32MP1 support
pbl multiimage: Allow to check image sizes
mci: imx-esdhc: Actually enable cache snooping
Add Freescale QUICC Engine firmware support
net: Add Freescale FMan ethernet support
ARM: Add arm64 pbl udelay
esdhc-xload: Add support for Layerscape
watchdog: imx: Add register accessor functions
watchdog: imx: Add big endian register access support
scripts: Add Layerscape image tool
i2c: i.MX: Add layerscape support
ddr: fsl: Add Freescale ddr driver
ARM: Add basic Layerscape support
clk: Add Layerscape clk support
ARM: Layerscape: Add LS1046a RDB board support
ARM: Layerscape: Add TQ TQMLS1046a board support
ARM: Add layerscape_defconfig
ARM: semihosting: Fix function prototype
treewide: Make locally used functions static
treewide: Add missing includes
ARM: i.MX: external-nand-boot: remove unused i.MX21 entry
ARM: boards: Harmonize barebox_arm_reset_vector() prototype
ARM: sha256: Remove unused functions
ARM: sha256: Remove unused header file
ARM: PXA: Provide prototype for pxa_clear_reset_source()
bus: mvebu-mbus: Add missing whitespace
mfd: twl-core: Add missing prototype for twlcore_get()
fs: squashfs: Remove unused function
dts: update to v5.1-rc1
dts: update to v5.1-rc2
dts: update to v5.1-rc3
Merge branch 'for-next/dts'
Merge branch 'for-next/imx'
Merge branch 'for-next/layerscape'
Merge branch 'for-next/lseek'
Merge branch 'for-next/misc'
Merge branch 'for-next/net'
Merge branch 'for-next/pstore'
Merge branch 'for-next/stm32'
Merge branch 'for-next/usb-storage'
Merge branch 'for-next/warnings'
Merge branch 'for-next/zynqmp'
hab: habv4_need_rng_software_self_test is needed without hab support
hab/caam: Fix compilation of caam driver when hab is disabled
Release v2019.05.0
Thomas Haemmerle (3):
of: populate "/firmware" while populating device tree
ARM: zynqmp: populate zynqmp_firmware dt node
ARM: zynqmp: add firmware DT node
Tomaz Solc (1):
ARM: rpi: add board revision for Compute Module 3+
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
