Hello list!
I need a __very quick__ answer to this subject, because a customer wants
to migrate from a iMX28 based board to a STM32MP1.
Actually the iMX28 board was developed by me, 6 years ago and it has
Barebox 2013.02, Linux Kernel 3.12.1 and a Debian Wheezy. It runs from
eMMC, but it can boot from microSD for production line.
I modified Barebox with custom made init scripts to enable some i2c
hardware before running Linux kernel, and Barebox had access/drivers for
ethernet, serial for debugging console, i2c (bit-banging) and some gpios.
It had access to ext4 filesystem on eMMC partition and managed somehow
the device tree to pass to Linux and it works like charms!
Now I would like to know (without spending too much time to gitclone the
repo and reading the configuration stuff) if Barebox is still able to
boot off a microSD, and having the same drivers available as the iMX28
has, just to reduce the porting session at their minimum levels.
P.S.: I know UBoot for the evaluation board has all stuff I need, but I
hate the way it works: too messy, too #ifdef clauses, etc.,...
Thank you in advance,
--
Eurek s.r.l. |
Electronic Engineering | http://www.eurek.it
via Celletta 8/B, 40026 Imola, Italy | Phone: +39-(0)542-609120
p.iva 00690621206 - c.f. 04020030377 | Fax: +39-(0)542-609212
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
