The current support for the ZII Dev Boards time out on eth1 when booting from net, which takes a while: Booting entry 'net' eth0: 100Mbps full duplex link detected T T T eth0: DHCP client bound to address 192.168.203.22 WARNING: eth1: No MAC address set. Using random address 3a:e8:f7:52:55:6d T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T Loading ARM Linux zImage '/mnt/tftp/none-linux-zii-dev-rev-b-2' eth1 is the DSA master interface and has no use within barebox, so disable the interface to allow Barebox to boot right away from eth0. Suggested-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx> Signed-off-by: Vivien Didelot <vivien.didelot@xxxxxxxxx> --- .../zii-vf610-dev/defaultenv-zii-vf610-dev/nv/dev.eth1.mode | 1 + 1 file changed, 1 insertion(+) create mode 100644 arch/arm/boards/zii-vf610-dev/defaultenv-zii-vf610-dev/nv/dev.eth1.mode diff --git a/arch/arm/boards/zii-vf610-dev/defaultenv-zii-vf610-dev/nv/dev.eth1.mode b/arch/arm/boards/zii-vf610-dev/defaultenv-zii-vf610-dev/nv/dev.eth1.mode new file mode 100644 index 000000000..87e7bdaae --- /dev/null +++ b/arch/arm/boards/zii-vf610-dev/defaultenv-zii-vf610-dev/nv/dev.eth1.mode @@ -0,0 +1 @@ +disabled \ No newline at end of file -- 2.21.0 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox