Instead of adding missing definitions to the existing at91sam9_ddrsdr.h and adapting the incoming DDRAM initialization code from at91bootstrap, just replace the lightly used existing header with: https://github.com/linux4sam/at91bootstrap/blob/v3.8.12/include/arch/at91_ddrsdrc.h For easier comprehension, the replacement is done in three steps: Here the existing at91sam9_ddrsdr.h has its now duplicate (in function, not name) macros removed and existing users are migrated to use the new header. Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> --- arch/arm/mach-at91/at91sam9g45_reset.S | 6 +- .../mach-at91/include/mach/at91sam9_ddrsdr.h | 138 ++---------------- 2 files changed, 12 insertions(+), 132 deletions(-) diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S index 6a58de618ce0..085683c7f9d8 100644 --- a/arch/arm/mach-at91/at91sam9g45_reset.S +++ b/arch/arm/mach-at91/at91sam9g45_reset.S @@ -20,13 +20,13 @@ .globl at91sam9g45_reset at91sam9g45_reset: mov r2, #1 - mov r3, #AT91_DDRSDRC_LPCB_POWER_DOWN + mov r3, #AT91C_DDRC2_LPCB_POWERDOWN ldr r4, =AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST .balign 32 @ align to cache line - str r2, [r0, #AT91_DDRSDRC_RTR] @ disable DDR0 access - str r3, [r0, #AT91_DDRSDRC_LPR] @ power down DDR0 + str r2, [r0, #AT91C_HDDRSDRC2_RTR] @ disable DDR0 access + str r3, [r0, #AT91C_HDDRSDRC2_LPR] @ power down DDR0 str r4, [r1] @ reset processor b . diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h index b50c11b128bf..22c00d9edaac 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h +++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h @@ -12,130 +12,10 @@ #ifndef AT91SAM9_DDRSDR_H #define AT91SAM9_DDRSDR_H -#define AT91_DDRSDRC_MR 0x00 /* Mode Register */ -#define AT91_DDRSDRC_MODE (0x7 << 0) /* Command Mode */ -#define AT91_DDRSDRC_MODE_NORMAL 0 -#define AT91_DDRSDRC_MODE_NOP 1 -#define AT91_DDRSDRC_MODE_PRECHARGE 2 -#define AT91_DDRSDRC_MODE_LMR 3 -#define AT91_DDRSDRC_MODE_REFRESH 4 -#define AT91_DDRSDRC_MODE_EXT_LMR 5 -#define AT91_DDRSDRC_MODE_DEEP 6 - -#define AT91_DDRSDRC_RTR 0x04 /* Refresh Timer Register */ -#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */ - -#define AT91_DDRSDRC_CR 0x08 /* Configuration Register */ -#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */ -#define AT91_DDRSDRC_NC_SDR8 (0 << 0) -#define AT91_DDRSDRC_NC_SDR9 (1 << 0) -#define AT91_DDRSDRC_NC_SDR10 (2 << 0) -#define AT91_DDRSDRC_NC_SDR11 (3 << 0) -#define AT91_DDRSDRC_NC_DDR9 (0 << 0) -#define AT91_DDRSDRC_NC_DDR10 (1 << 0) -#define AT91_DDRSDRC_NC_DDR11 (2 << 0) -#define AT91_DDRSDRC_NC_DDR12 (3 << 0) -#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */ -#define AT91_DDRSDRC_NR_11 (0 << 2) -#define AT91_DDRSDRC_NR_12 (1 << 2) -#define AT91_DDRSDRC_NR_13 (2 << 2) -#define AT91_DDRSDRC_NR_14 (3 << 2) -#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */ -#define AT91_DDRSDRC_CAS_2 (2 << 4) -#define AT91_DDRSDRC_CAS_3 (3 << 4) -#define AT91_DDRSDRC_CAS_25 (6 << 4) -#define AT91_DDRSDRC_RST_DLL (1 << 7) /* Reset DLL */ -#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */ -#define AT91_DDRSDRC_DIS_DLL (1 << 9) /* Disable DLL [SAM9 Only] */ -#define AT91_DDRSDRC_OCD (1 << 12) /* Off-Chip Driver [SAM9 Only] */ -#define AT91_DDRSDRC_DQMS (1 << 16) /* Mask Data is Shared [SAM9 Only] */ -#define AT91_DDRSDRC_ACTBST (1 << 18) /* Active Bank X to Burst Stop Read Access Bank Y [SAM9 Only] */ -#define AT91_DDRSDRC_NB (1 << 20) /* Number of -Banks [not SAM9G45] */ -#define AT91_SDRAMC_NB_4 (0 << 20) -#define AT91_SDRAMC_NB_8 (1 << 20) - -#define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */ -#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */ -#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */ -#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */ -#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */ -#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ -#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ -#define AT91_DDRSDRC_TWTR (0x7 << 24) /* Internal Write to Read delay */ -#define AT91CAP9_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */ -#define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay [SAM9 Only] */ -#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ - -#define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */ -#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */ -#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */ -#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */ -#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */ - -#define AT91_DDRSDRC_T2PR 0x14 /* Timing 2 Register [SAM9 Only] */ -#define AT91_DDRSDRC_TXARD (0xf << 0) /* Exit active power down delay to read command in mode "Fast Exit" */ -#define AT91_DDRSDRC_TXARDS (0xf << 4) /* Exit active power down delay to read command in mode "Slow Exit" */ -#define AT91_DDRSDRC_TRPA (0xf << 8) /* Row Precharge All delay */ -#define AT91_DDRSDRC_TRTP (0x7 << 12) /* Read to Precharge delay */ - -#define AT91_DDRSDRC_LPR 0x1C /* Low Power Register */ -#define AT91CAP9_DDRSDRC_LPR 0x18 /* Low Power Register */ -#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ -#define AT91_DDRSDRC_LPCB_DISABLE 0 -#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 -#define AT91_DDRSDRC_LPCB_POWER_DOWN 2 -#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3 -#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */ -#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */ -#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ -#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */ -#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ -#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12) -#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12) -#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12) -#define AT91_DDRSDRC_APDE (1 << 16) /* Active power down exit time */ -#define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */ - -#define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */ -#define AT91CAP9_DDRSDRC_MDR 0x1C /* Memory Device Register */ -#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ -#define AT91_DDRSDRC_MD_SDR 0 -#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 -#define AT91CAP9_DDRSDRC_MD_DDR 2 -#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 -#define AT91_DDRSDRC_MD_DDR2 6 /* [SAM9 Only] */ -#define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */ -#define AT91_DDRSDRC_DBW_32BITS (0 << 4) -#define AT91_DDRSDRC_DBW_16BITS (1 << 4) - -#define AT91_DDRSDRC_DLL 0x24 /* DLL Information Register */ -#define AT91CAP9_DDRSDRC_DLL 0x20 /* DLL Information Register */ -#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ -#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ -#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ -#define AT91CAP9_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */ -#define AT91CAP9_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */ -#define AT91CAP9_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */ -#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ -#define AT91CAP9_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */ -#define AT91CAP9_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */ - -#define AT91_DDRSDRC_HS 0x2C /* High Speed Register [SAM9 Only] */ -#define AT91_DDRSDRC_DIS_ATCP_RD (1 << 2) /* Anticip read access is disabled */ - -#define AT91_DDRSDRC_DELAY(n) (0x30 + (0x4 * (n))) /* Delay I/O Register n */ - -#define AT91_DDRSDRC_WPMR 0xE4 /* Write Protect Mode Register [SAM9 Only] */ -#define AT91_DDRSDRC_WP (1 << 0) /* Write protect enable */ -#define AT91_DDRSDRC_WPKEY (0xffffff << 8) /* Write protect key */ -#define AT91_DDRSDRC_KEY (0x444452 << 8) /* Write protect key = "DDR" */ - -#define AT91_DDRSDRC_WPSR 0xE8 /* Write Protect Status Register [SAM9 Only] */ -#define AT91_DDRSDRC_WPVS (1 << 0) /* Write protect violation status */ -#define AT91_DDRSDRC_WPVSRC (0xffff << 8) /* Write protect violation source */ +#include <mach/at91_ddrsdrc.h> #ifndef __ASSEMBLY__ +#include <common.h> #include <io.h> static inline u32 at91_get_ddram_size(void * __iomem base, bool is_nb) @@ -145,11 +25,11 @@ static inline u32 at91_get_ddram_size(void * __iomem base, bool is_nb) u32 size; bool is_sdram; - cr = readl(base + AT91_DDRSDRC_CR); - mdr = readl(base + AT91_DDRSDRC_MDR); + cr = readl(base + AT91C_HDDRSDRC2_CR); + mdr = readl(base + AT91C_HDDRSDRC2_MDR); /* will always be false for sama5d2, sama5d3 or sama5d4 */ - is_sdram = (mdr & AT91_DDRSDRC_MD) <= AT91_DDRSDRC_MD_LOW_POWER_SDR; + is_sdram = (mdr & AT91C_DDRC2_MD) <= AT91C_DDRC2_MD_LP_SDR_SDRAM; /* Formula: * size = bank << (col + row + 1); @@ -158,19 +38,19 @@ static inline u32 at91_get_ddram_size(void * __iomem base, bool is_nb) */ size = 1; /* COL */ - size += (cr & AT91_DDRSDRC_NC) + 8; + size += (cr & AT91C_DDRC2_NC) + 8; if (!is_sdram) size ++; /* ROW */ - size += ((cr & AT91_DDRSDRC_NR) >> 2) + 11; + size += ((cr & AT91C_DDRC2_NR) >> 2) + 11; /* BANK */ if (is_nb) - size = ((cr & AT91_DDRSDRC_NB) ? 8 : 4) << size; + size = ((cr & AT91C_DDRC2_NB_BANKS) ? 8 : 4) << size; else size = 4 << size; /* bandwidth */ - if (!(mdr & AT91_DDRSDRC_DBW)) + if (!(mdr & AT91C_DDRC2_DBW)) size <<= 1; return size; -- 2.20.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
