From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
MMDC CH1 is not used on i.MX6Q, so the handshake needed to change the
parent of periph2_sel or the divider of mmdc_ch1_axi_podf will never
succeed.
Disable the handshake mechanism to allow changing the frequency of
mmdc_ch1_axi, allowing to use it as a possible source for the LDB DI
clock.
Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxx>
Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx>
[afa: ported to barebox from Linux commit f13abeff2c]
[afa: moved call site to where it would've been moved in following commit]
Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
---
drivers/clk/imx/clk-imx6.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/clk/imx/clk-imx6.c b/drivers/clk/imx/clk-imx6.c
index 88c4bcde1cb3..21cbc77c50c5 100644
--- a/drivers/clk/imx/clk-imx6.c
+++ b/drivers/clk/imx/clk-imx6.c
@@ -299,6 +299,19 @@ static struct clk_div_table video_div_table[] = {
{ /* sentinel */ }
};
+#define CCM_CCDR 0x04
+
+#define CCDR_MMDC_CH1_MASK BIT(16)
+
+static void __init imx6q_mmdc_ch1_mask_handshake(void __iomem *ccm_base)
+{
+ unsigned int reg;
+
+ reg = readl(ccm_base + CCM_CCDR);
+ reg |= CCDR_MMDC_CH1_MASK;
+ writel(reg, ccm_base + CCM_CCDR);
+}
+
static void imx6_add_video_clks(void __iomem *anab, void __iomem *cb)
{
clks[IMX6QDL_CLK_PLL5_POST_DIV] = imx_clk_divider_table("pll5_post_div", "pll5_video", anab + 0xa0, 19, 2, post_div_table);
@@ -306,6 +319,9 @@ static void imx6_add_video_clks(void __iomem *anab, void __iomem *cb)
clks[IMX6QDL_CLK_IPU1_SEL] = imx_clk_mux("ipu1_sel", cb + 0x3c, 9, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
clks[IMX6QDL_CLK_IPU2_SEL] = imx_clk_mux("ipu2_sel", cb + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
+
+ imx6q_mmdc_ch1_mask_handshake(cb);
+
clks[IMX6QDL_CLK_LDB_DI0_SEL] = imx_clk_mux_p("ldb_di0_sel", cb + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels));
clks[IMX6QDL_CLK_LDB_DI1_SEL] = imx_clk_mux_p("ldb_di1_sel", cb + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels));
clks[IMX6QDL_CLK_IPU1_DI0_PRE_SEL] = imx_clk_mux_p("ipu1_di0_pre_sel", cb + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels));
--
2.20.1
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
