Everyone: This series adds code needed to expose U-Boot environemnt variable data partition as a regular filesystem in Barebox. It currently only supports the use-case where environment is stored on SD/MMC device, since that is the only use-case I have access to for testing, however adding support for other cases should be relatively straightforward. The series is currently lacking documentation for Barebox specific DT bindings it introduces, however an example of usage can be seen in ARM: rdu2: Add U-Boot environment partitions ARM: rdu1: Add U-Boot environment partition I'll add the appropriate documentation in v2 once all of the details are hashed out. Feedback is welcome! Thanks, Andrey Smirnov Andrey Smirnov (6): filetype: Add "U-Boot environmemnt variable data" filetype filetype: Allow specifying cdev's filetype explicitly drivers: Introduce late_platform_driver() misc: Add a driver to expose U-Boot environment variable data fs: Add a driver to access U-Boot environment variables ARM: rdu2: Add U-Boot environment partitions Cory Tusar (1): ARM: rdu1: Add U-Boot environment partition arch/arm/dts/imx51-zii-rdu1.dts | 21 ++ arch/arm/dts/imx6qdl-zii-rdu2.dtsi | 27 ++ common/filetype.c | 8 + drivers/misc/Kconfig | 12 + drivers/misc/Makefile | 1 + drivers/misc/ubootvar.c | 322 +++++++++++++++++++ fs/Kconfig | 8 + fs/Makefile | 1 + fs/ubootvarfs.c | 499 +++++++++++++++++++++++++++++ include/driver.h | 4 + include/filetype.h | 1 + 11 files changed, 904 insertions(+) create mode 100644 drivers/misc/ubootvar.c create mode 100644 fs/ubootvarfs.c -- 2.21.0 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
