Hi Ahmad. On Mon, Apr 01, 2019 at 12:18:18PM +0200, Ahmad Fatoum wrote: > Incoming microchip-ksz9477-evb first stage will add one more entry point > for the first stage. As there is a little reason to use the same piggy > data for both images (BOOT.BIN, the first stage, is limited to 64K), have > CONFIG_AT91_LOAD_BAREBOX_SRAM decide which stage should be built. > > Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> > --- > arch/arm/mach-at91/Kconfig | 2 +- > images/Makefile.at91 | 12 +++++++++--- > 2 files changed, 10 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig > index 8e1bf0629ab7..60f427d7d483 100644 > --- a/arch/arm/mach-at91/Kconfig > +++ b/arch/arm/mach-at91/Kconfig > @@ -615,7 +615,7 @@ config AT91_BOOTSTRAP > select BOOTSTRAP > > config AT91_LOAD_BAREBOX_SRAM > - bool "at91 load barebox in sram" > + bool "at91 barebox image will be loaded into SRAM" > depends on SHELL_NONE || HAVE_AT91_LOAD_BAREBOX_SRAM > default y if SHELL_NONE > > diff --git a/images/Makefile.at91 b/images/Makefile.at91 > index acdb591d2452..3f1dd57f6c58 100644 > --- a/images/Makefile.at91 > +++ b/images/Makefile.at91 > @@ -4,12 +4,18 @@ > > pblb-$(CONFIG_MACH_AT91SAM9X5EK) += start_at91sam9x5ek > FILE_barebox-at91sam9x5ek.img = start_at91sam9x5ek.pblb > -image-$(CONFIG_MACH_AT91SAM9X5EK) += barebox-at91sam9x5ek.img > +at91-barebox-$(CONFIG_MACH_AT91SAM9X5EK) += barebox-at91sam9x5ek.img > > pblb-$(CONFIG_MACH_AT91SAM9263EK) += start_at91sam9263ek > FILE_barebox-at91sam9263ek.img = start_at91sam9263ek.pblb > -image-$(CONFIG_MACH_AT91SAM9263EK) += barebox-at91sam9263ek.img > +at91-barebox-$(CONFIG_MACH_AT91SAM9263EK) += barebox-at91sam9263ek.img > > pblb-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += start_sama5d3_xplained_ung8071 > FILE_barebox-microchip-ksz9477-evb.img = start_sama5d3_xplained_ung8071.pblb > -image-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += barebox-microchip-ksz9477-evb.img > +at91-barebox-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += barebox-microchip-ksz9477-evb.img > + > +ifdef CONFIG_AT91_LOAD_BAREBOX_SRAM > +image-y += $(at91-boot-bin-y) > +else > +image-y += $(at91-barebox-y) > +endif I cannot follow what you do in the line "image-y += $(at91-boot-bin-y)". Could you try to elaborate. Sam _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
