Signed-off-by: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
---
v1 -> v2:
- removed unnecessary chapter in kconfig helptext
- removed platform data setup and teardown callbacks
- removed error path for xzalloc
v2 -> v3:
- removed include/platform_data/pcf857x.h
- removed useage and comments of platform_data
drivers/gpio/Kconfig | 16 +++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-pcf857x.c | 254 ++++++++++++++++++++++++++++++++++++
3 files changed, 271 insertions(+)
create mode 100644 drivers/gpio/gpio-pcf857x.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index c535904ed0..9bfa97160c 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -98,6 +98,22 @@ config GPIO_PCA953X
40 bits: pca9505, pca9698
+config GPIO_PCF857X
+ tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders"
+ depends on I2C
+ help
+ Say yes here to provide access to most "quasi-bidirectional" I2C
+ GPIO expanders used for additional digital outputs or inputs.
+ Most of these parts are from NXP, though TI is a second source for
+ some of them. Compatible models include:
+
+ 8 bits: pcf8574, pcf8574a, pca8574, pca8574a,
+ pca9670, pca9672, pca9674, pca9674a,
+ max7328, max7329
+
+ 16 bits: pcf8575, pcf8575c, pca8575,
+ pca9671, pca9673, pca9675
+
config GPIO_PL061
bool "PrimeCell PL061 GPIO support"
depends on ARM_AMBA
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 52280f0bb4..990df01788 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_GPIO_MALTA_FPGA_I2C) += gpio-malta-fpga-i2c.o
obj-$(CONFIG_GPIO_ORION) += gpio-orion.o
obj-$(CONFIG_GPIO_OMAP) += gpio-omap.o
obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o
+obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
obj-$(CONFIG_GPIO_TEGRA) += gpio-tegra.o
diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c
new file mode 100644
index 0000000000..a10d5d8407
--- /dev/null
+++ b/drivers/gpio/gpio-pcf857x.c
@@ -0,0 +1,254 @@
+/*
+ * Driver for pcf857x, pca857x, and pca967x I2C GPIO expanders
+ *
+ * This code was ported from linux-5.1 kernel by Michael Grzeschik.
+ *
+ * Copyright (C) 2007 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <driver.h>
+#include <xfuncs.h>
+#include <errno.h>
+#include <i2c/i2c.h>
+#include <gpio.h>
+
+static const struct platform_device_id pcf857x_id[] = {
+ { "pcf8574", 8 },
+ { "pcf8574a", 8 },
+ { "pca8574", 8 },
+ { "pca9670", 8 },
+ { "pca9672", 8 },
+ { "pca9674", 8 },
+ { "pcf8575", 16 },
+ { "pca8575", 16 },
+ { "pca9671", 16 },
+ { "pca9673", 16 },
+ { "pca9675", 16 },
+ { "max7328", 8 },
+ { "max7329", 8 },
+ { }
+};
+
+/*
+ * The pcf857x, pca857x, and pca967x chips only expose one read and one
+ * write register. Writing a "one" bit (to match the reset state) lets
+ * that pin be used as an input; it's not an open-drain model, but acts
+ * a bit like one. This is described as "quasi-bidirectional"; read the
+ * chip documentation for details.
+ *
+ * Many other I2C GPIO expander chips (like the pca953x models) have
+ * more complex register models and more conventional circuitry using
+ * push/pull drivers. They often use the same 0x20..0x27 addresses as
+ * pcf857x parts, making the "legacy" I2C driver model problematic.
+ */
+struct pcf857x {
+ struct gpio_chip chip;
+ struct i2c_client *client;
+ unsigned out; /* software latch */
+
+ int (*write)(struct i2c_client *client, unsigned data);
+ int (*read)(struct i2c_client *client);
+};
+
+static inline struct pcf857x *to_pcf(struct gpio_chip *gc)
+{
+ return container_of(gc, struct pcf857x, chip);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Talk to 8-bit I/O expander */
+
+static int i2c_write_le8(struct i2c_client *client, unsigned data)
+{
+ return i2c_smbus_write_byte(client, data);
+}
+
+static int i2c_read_le8(struct i2c_client *client)
+{
+ return (int)i2c_smbus_read_byte(client);
+}
+
+/* Talk to 16-bit I/O expander */
+
+static int i2c_write_le16(struct i2c_client *client, unsigned word)
+{
+ u8 buf[2] = { word & 0xff, word >> 8, };
+ int ret;
+
+ ret = i2c_master_send(client, buf, 2);
+ return (ret < 0) ? ret : 0;
+}
+
+static int i2c_read_le16(struct i2c_client *client)
+{
+ u8 buf[2];
+ int ret;
+
+ ret = i2c_master_recv(client, buf, 2);
+ if (ret < 0)
+ return ret;
+ return (buf[1] << 8) | buf[0];
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int pcf857x_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct pcf857x *gpio = to_pcf(chip);
+ int ret;
+
+ gpio->out |= (1 << offset);
+ ret = gpio->write(gpio->client, gpio->out);
+
+ return ret;
+}
+
+static int pcf857x_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct pcf857x *gpio = to_pcf(chip);
+ int value;
+
+ value = gpio->read(gpio->client);
+ return (value < 0) ? value : !!(value & (1 << offset));
+}
+
+static int pcf857x_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct pcf857x *gpio = to_pcf(chip);
+ unsigned bit = 1 << offset;
+ int ret;
+
+ if (value)
+ gpio->out |= bit;
+ else
+ gpio->out &= ~bit;
+ ret = gpio->write(gpio->client, gpio->out);
+
+ return ret;
+}
+
+static void pcf857x_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ pcf857x_output(chip, offset, value);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct gpio_ops pcf857x_gpio_ops = {
+ .direction_input = pcf857x_input,
+ .direction_output = pcf857x_output,
+ .get = pcf857x_get,
+ .set = pcf857x_set,
+};
+
+static int pcf857x_probe(struct device_d *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct device_node *np = dev->device_node;
+ struct pcf857x *gpio;
+ unsigned long driver_data;
+ unsigned int n_latch = 0;
+ int ret;
+
+ if (IS_ENABLED(CONFIG_OF) && np)
+ of_property_read_u32(np, "lines-initial-states", &n_latch);
+
+ /* Allocate, initialize, and register this gpio_chip. */
+ gpio = xzalloc(sizeof(*gpio));
+
+ ret = dev_get_drvdata(dev, (const void **)&driver_data);
+ if (ret)
+ return ret;
+
+ gpio->chip.base = -1;
+ gpio->chip.ops = &pcf857x_gpio_ops;
+ gpio->chip.ngpio = driver_data;
+ gpio->chip.dev = &client->dev;
+
+ /* NOTE: the OnSemi jlc1562b is also largely compatible with
+ * these parts, notably for output. It has a low-resolution
+ * DAC instead of pin change IRQs; and its inputs can be the
+ * result of comparators.
+ */
+
+ /* 8574 addresses are 0x20..0x27; 8574a uses 0x38..0x3f;
+ * 9670, 9672, 9764, and 9764a use quite a variety.
+ *
+ * NOTE: we don't distinguish here between *4 and *4a parts.
+ */
+ switch (gpio->chip.ngpio) {
+ case 8:
+ gpio->write = i2c_write_le8;
+ gpio->read = i2c_read_le8;
+ break;
+ /* '75/'75c addresses are 0x20..0x27, just like the '74;
+ * the '75c doesn't have a current source pulling high.
+ * 9671, 9673, and 9765 use quite a variety of addresses.
+ *
+ * NOTE: we don't distinguish here between '75 and '75c parts.
+ */
+ case 16:
+ gpio->write = i2c_write_le16;
+ gpio->read = i2c_read_le16;
+ break;
+ default:
+ dev_warn(&client->dev, "unsupported number of gpios\n");
+ return -EINVAL;
+ }
+
+ gpio->client = client;
+
+ /* NOTE: these chips have strange "quasi-bidirectional" I/O pins.
+ * We can't actually know whether a pin is configured (a) as output
+ * and driving the signal low, or (b) as input and reporting a low
+ * value ... without knowing the last value written since the chip
+ * came out of reset (if any). We can't read the latched output.
+ *
+ * In short, the only reliable solution for setting up pin direction
+ * is to do it explicitly.
+ *
+ * Using n_latch avoids that trouble. When left initialized to zero,
+ * our software copy of the "latch" then matches the chip's all-ones
+ * reset state. Otherwise it flags pins to be driven low.
+ */
+ gpio->out = ~n_latch;
+
+ ret = gpiochip_add(&gpio->chip);
+ if (ret)
+ return ret;
+
+ return ret;
+}
+
+static const struct of_device_id pcf857x_dt_ids[] = {
+ { .compatible = "nxp,pcf8574", .data = (void *)8 },
+ { .compatible = "nxp,pcf8574a", .data = (void *)8 },
+ { .compatible = "nxp,pca8574", .data = (void *)8 },
+ { .compatible = "nxp,pca9670", .data = (void *)8 },
+ { .compatible = "nxp,pca9672", .data = (void *)8 },
+ { .compatible = "nxp,pca9674", .data = (void *)8 },
+ { .compatible = "nxp,pcf8575", .data = (void *)16 },
+ { .compatible = "nxp,pca8575", .data = (void *)16 },
+ { .compatible = "nxp,pca9671", .data = (void *)16 },
+ { .compatible = "nxp,pca9673", .data = (void *)16 },
+ { .compatible = "nxp,pca9675", .data = (void *)16 },
+ { .compatible = "maxim,max7328", .data = (void *)8 },
+ { .compatible = "maxim,max7329", .data = (void *)8 },
+ { }
+};
+
+static struct driver_d pcf857x_driver = {
+ .name = "pcf857x",
+ .probe = pcf857x_probe,
+ .of_compatible = DRV_OF_COMPAT(pcf857x_dt_ids),
+ .id_table = pcf857x_id,
+};
+device_i2c_driver(pcf857x_driver);
--
2.20.1
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
