The TQMLS1046a can boot from QSPI and SD/MMC. Add partitioning for these
devices and barebox environment / barebox update handlers on them.
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
arch/arm/boards/tqmls1046a/board.c | 24 ++++++++++
arch/arm/dts/fsl-tqmls1046a-mbls10xxa.dts | 56 +++++++++++++++++++++++
2 files changed, 80 insertions(+)
diff --git a/arch/arm/boards/tqmls1046a/board.c b/arch/arm/boards/tqmls1046a/board.c
index caf0f7ce38..8cc4d73de5 100644
--- a/arch/arm/boards/tqmls1046a/board.c
+++ b/arch/arm/boards/tqmls1046a/board.c
@@ -3,11 +3,15 @@
#include <common.h>
#include <init.h>
#include <envfs.h>
+#include <bbu.h>
+#include <bootsource.h>
#include <asm/memory.h>
#include <linux/sizes.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <soc/fsl/immap_lsch2.h>
+#include <mach/bbu.h>
+#include <mach/layerscape.h>
static int tqmls1046a_mem_init(void)
{
@@ -23,6 +27,8 @@ mem_initcall(tqmls1046a_mem_init);
static int tqmls1046a_postcore_init(void)
{
struct ccsr_scfg *scfg = IOMEM(LSCH2_SCFG_ADDR);
+ enum bootsource bootsource;
+ unsigned long sd_bbu_flags = 0, qspi_bbu_flags = 0;
if (!of_machine_is_compatible("tqc,tqmls1046a"))
return 0;
@@ -35,6 +41,24 @@ static int tqmls1046a_postcore_init(void)
/* divide CGA1/CGA2 PLL by 24 to get QSPI interface clock */
out_be32(&scfg->qspi_cfg, 0x30100000);
+ bootsource = ls1046_bootsource_get();
+
+ switch (bootsource) {
+ case BOOTSOURCE_MMC:
+ of_device_enable_path("/chosen/environment-sd");
+ sd_bbu_flags = BBU_HANDLER_FLAG_DEFAULT;
+ break;
+ case BOOTSOURCE_SPI_NOR:
+ of_device_enable_path("/chosen/environment-qspi");
+ qspi_bbu_flags = BBU_HANDLER_FLAG_DEFAULT;
+ break;
+ default:
+ break;
+ }
+
+ ls1046a_bbu_mmc_register_handler("sd", "/dev/mmc0.barebox", sd_bbu_flags);
+ ls1046a_bbu_qspi_register_handler("qspi", "/dev/qspiflash0.barebox", qspi_bbu_flags);
+
return 0;
}
diff --git a/arch/arm/dts/fsl-tqmls1046a-mbls10xxa.dts b/arch/arm/dts/fsl-tqmls1046a-mbls10xxa.dts
index d783d50baf..f0332e3999 100644
--- a/arch/arm/dts/fsl-tqmls1046a-mbls10xxa.dts
+++ b/arch/arm/dts/fsl-tqmls1046a-mbls10xxa.dts
@@ -20,6 +20,8 @@
serial0 = &duart0;
serial1 = &duart1;
mmc0 = &esdhc;
+ qspiflash0 = &qflash0;
+ qspiflash1 = &qflash1;
qsgmii_s1_p1 = &qsgmii1_phy1;
qsgmii_s1_p2 = &qsgmii1_phy2;
qsgmii_s2_p1 = &qsgmii2_phy1;
@@ -30,6 +32,18 @@
chosen {
stdout-path = "serial1:115200n8";
+
+ environment-sd {
+ compatible = "barebox,environment";
+ device-path = &environment_sd;
+ status = "disabled";
+ };
+
+ environment-qspi {
+ compatible = "barebox,environment";
+ device-path = &environment_qspi;
+ status = "disabled";
+ };
};
gpio-keys-polled {
@@ -63,6 +77,24 @@
};
+&esdhc {
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "fixed-partitions";
+
+ partition@0 {
+ label = "barebox";
+ reg = <0x1000 0xdf000>;
+ };
+
+ environment_sd: partition@e0000 {
+ label = "barebox-environment";
+ reg = <0xe0000 0x20000>;
+ };
+ };
+};
&duart0 {
status = "okay";
@@ -259,3 +291,27 @@
status = "disabled";
};
};
+
+&qflash0 {
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "fixed-partitions";
+
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0x200000>;
+ };
+
+ environment_qspi: partition@200000 {
+ label = "barebox-environment";
+ reg = <0x200000 0x80000>;
+ };
+
+ partition@280000 {
+ label = "data";
+ reg = <0x280000 0x0>;
+ };
+ };
+};
--
2.20.1
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
