U-Boot V2 Development (Barebox)

• Date Index

• [PATCH] ARM: OMAP: Rework watchdog code, Alexander Shiyan
  • Re: [PATCH] ARM: OMAP: Rework watchdog code, Sascha Hauer
  • Re: [PATCH] ARM: OMAP: Rework watchdog code, Ahmad Fatoum
• [PATCH] serial: Kconfig: Remove DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS option, Alexander Shiyan
  • Re: [PATCH] serial: Kconfig: Remove DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS option, Sascha Hauer
• [PATCH next] read_file: Pass NULL for the size parameter if the return value is not used, Alexander Shiyan
  • Re: [PATCH next] read_file: Pass NULL for the size parameter if the return value is not used, Sascha Hauer
• [PATCH v2] common: add help text for CONFIG_STATE, Ahmad Fatoum
  • Re: [PATCH v2] common: add help text for CONFIG_STATE, Sascha Hauer
• [PATCH] common: add help text for CONFIG_STATE, Ahmad Fatoum
• [PATCH v2 00/21] ARM: rpi: add basic Raspberry Pi 4 support, Ahmad Fatoum
  • [PATCH v2 02/21] dma: add dma_sync nop stubs for PBL, Ahmad Fatoum
    • Re: [PATCH v2 02/21] dma: add dma_sync nop stubs for PBL, Sascha Hauer
      • Re: [PATCH v2 02/21] dma: add dma_sync nop stubs for PBL, Ahmad Fatoum
  • [PATCH v2 12/21] ARM: cpu: remove unused SYS_SUPPORTS_32BIT_KERNEL, Ahmad Fatoum
  • [PATCH v2 16/21] mci: bcm2835: add bcm2711-emmc2 (Rpi4) support, Ahmad Fatoum
  • [PATCH v2 14/21] ARM: rpi: rpi3: disallow MMU_EARLY && 64BIT, Ahmad Fatoum
  • [PATCH v2 11/21] ARM: cpu: remove unnecessary CONFIG_SYS_SUPPORTS_64BIT_KERNEL, Ahmad Fatoum
  • [PATCH v2 05/21] ARM: rpi: split out mbox helpers to share code with PBL, Ahmad Fatoum
  • [PATCH v2 10/21] ARM: cpu: prevent recursive dependencies via CPU_SUPPORTS_64BIT_KERNEL, Ahmad Fatoum
  • [PATCH v2 19/21] ARM: rpi: add debug_ll support for Raspberry Pi 4, Ahmad Fatoum
  • [PATCH v2 15/21] clk: rpi: add Raspberry Pi 4 support, Ahmad Fatoum
    • Re: [PATCH v2 15/21] clk: rpi: add Raspberry Pi 4 support, Sascha Hauer
      • Re: [PATCH v2 15/21] clk: rpi: add Raspberry Pi 4 support, Ahmad Fatoum
  • [PATCH v2 20/21] doc: bcm283x: reference newer firmware, Ahmad Fatoum
  • [PATCH v2 09/21] serial: ns16550: rpi: remove ungating now done by proper clk driver, Ahmad Fatoum
  • [PATCH v2 21/21] ARM: rpi: use correct kernel8.img as name for 64-bit, Ahmad Fatoum
  • [PATCH v2 08/21] ARM: rpi: support FDT in x0 for 64bit configurations, Ahmad Fatoum
  • [PATCH v2 13/21] ARM: rpi: add Raspberry Pi 3 64-bit build support, Ahmad Fatoum
  • [PATCH v2 01/21] ARM64: asm: implement read_cpuid_id(), Ahmad Fatoum
  • [PATCH v2 17/21] clocksource: bcm2835: bump below architeced timer for AArch64, Ahmad Fatoum
  • [PATCH v2 18/21] ARM: rpi: add Raspberry Pi 4 support, Ahmad Fatoum
  • [PATCH v2 04/21] ARM: rpi: support PBL use of mbox, Ahmad Fatoum
  • [PATCH v2 07/21] ARM: rpi: add generic Raspberry Pi image, Ahmad Fatoum
  • [PATCH v2 06/21] ARM: rpi: switch to ARM_USE_COMPRESSED_DTB, Ahmad Fatoum
  • [PATCH v2 03/21] ARM: rpi: move bcm2835_add_device_sdram() into header, Ahmad Fatoum
  • Re: [PATCH v2 00/21] ARM: rpi: add basic Raspberry Pi 4 support, Sascha Hauer
• [PATCH 0/4] of: request reserved memory regions so other code can't, Ahmad Fatoum
  • [PATCH 1/4] nvmem: rmem: get, don't request, memory region, Ahmad Fatoum
  • [PATCH 3/4] of: add of_get_reserve_map stub for !CONFIG_OFTREE, Ahmad Fatoum
    • Re: [PATCH 3/4] of: add of_get_reserve_map stub for !CONFIG_OFTREE, Sascha Hauer
  • [PATCH 4/4] of: request reserved memory regions so other code can't, Ahmad Fatoum
    • Re: [PATCH 4/4] of: request reserved memory regions so other code can't, Sascha Hauer
      • Re: [PATCH 4/4] of: request reserved memory regions so other code can't, Ahmad Fatoum
    • [PATCH] fixup! of: request reserved memory regions so other code can't, Ahmad Fatoum
  • [PATCH 2/4] of: reserve: mark runtime firmware code regions specially, Ahmad Fatoum
    • Re: [PATCH 2/4] of: reserve: mark runtime firmware code regions specially, Sascha Hauer
      • Re: [PATCH 2/4] of: reserve: mark runtime firmware code regions specially, Ahmad Fatoum
• [PATCH] fixup! ARM64/RISC-V: booti: support global.bootm.image.loadaddr, Ahmad Fatoum
  • Re: [PATCH] fixup! ARM64/RISC-V: booti: support global.bootm.image.loadaddr, Sascha Hauer
• [PATCH] arm: rockchip: switch to mainline dts for rk3568-evb1, Michael Riesch
  • Re: [PATCH] arm: rockchip: switch to mainline dts for rk3568-evb1, Sascha Hauer
• [PATCH] serial: ns16550: Remove empty line after return, Jules Maselbas
  • Re: [PATCH] serial: ns16550: Remove empty line after return, Sascha Hauer
• [PATCH] ARM: i.MX8MN: Fix script to extract firmware blobs, Uwe Kleine-König
  • Re: [PATCH] ARM: i.MX8MN: Fix script to extract firmware blobs, Sascha Hauer
• [PATCH] common: reset_source: Remove of_get_reset_source_priority(), Alexander Shiyan
  • Re: [PATCH] common: reset_source: Remove of_get_reset_source_priority(), Sascha Hauer
    • Re: [PATCH] common: reset_source: Remove of_get_reset_source_priority(), Alexander Shiyan
      • Re: [PATCH] common: reset_source: Remove of_get_reset_source_priority(), Sascha Hauer
  • Re: [PATCH] common: reset_source: Remove of_get_reset_source_priority(), Michael Riesch
    • Re: [PATCH] common: reset_source: Remove of_get_reset_source_priority(), Alexander Shiyan
      • Re: [PATCH] common: reset_source: Remove of_get_reset_source_priority(), Sascha Hauer
• [PATCH 1/2] serial: ns16550: Adding compatibility for the AM437X platforms, Alexander Shiyan
  • [PATCH 2/2] serial: ns16550: Remove redundant driver data for generic ns16550 variants, Alexander Shiyan
  • Re: [PATCH 1/2] serial: ns16550: Adding compatibility for the AM437X platforms, Sascha Hauer
• [PATCH] treewide: Remove duplicate incudes, Alexander Shiyan
  • Re: [PATCH] treewide: Remove duplicate incudes, Sascha Hauer
• [PATCH] ARM: OMAP: syslib: Optimize wait_on_value() function, Alexander Shiyan
  • Re: [PATCH] ARM: OMAP: syslib: Optimize wait_on_value() function, Sascha Hauer
• [RFC 1/8] ARM: OMAP: Rearranging EMIF4 definitions, Alexander Shiyan
  • [RFC 3/8] ARM: OMAP: Adopt am35xx_emif4_init() to use fixed offset definitions, Alexander Shiyan
  • [RFC 5/8] ARM: OMAP: emif: Abstract am35xx_emif4 from any CPU-specific includes, Alexander Shiyan
  • [RFC 4/8] ARM: OMAP: Move locally used definitions from emif4 header to am35xx_emif4, Alexander Shiyan
  • [RFC 2/8] ARM: OMAP: Move EMIF4 definitions to appropriate header, Alexander Shiyan
  • [RFC 6/8] ARM: OMAP: emif: Rename am35xx_emif4 unit, Alexander Shiyan
  • [RFC 7/8] ARM: OMAP: Use EMIF4 registers for get SDRAM size, Alexander Shiyan
  • [RFC 8/8] ARM: OMAP: Move am33xx_sdram_size() into EMIF module and make it generic, Alexander Shiyan
  • Re: [RFC 1/8] ARM: OMAP: Rearranging EMIF4 definitions, Sascha Hauer
    • Re: [RFC 1/8] ARM: OMAP: Rearranging EMIF4 definitions, Alexander Shiyan
• [PATCH] ARM64/RISC-V: booti: support global.bootm.image.loadaddr, Ahmad Fatoum
  • Re: [PATCH] ARM64/RISC-V: booti: support global.bootm.image.loadaddr, Sascha Hauer
• [PATCH 1/2] ARM: cpuinfo: print CPU mainid if unknown, Ahmad Fatoum
  • [PATCH 2/2] ARM: cpuinfo: detect Cortex-A72, Ahmad Fatoum
  • Re: [PATCH 1/2] ARM: cpuinfo: print CPU mainid if unknown, Sascha Hauer
• [PATCH RESEND] of: address: fix printing of OF node name in error message, Ahmad Fatoum
  • Re: [PATCH RESEND] of: address: fix printing of OF node name in error message, Sascha Hauer
• [PATCH v2 1/2] commands: ls: explicitly check for directories with S_ISDIR, Ahmad Fatoum
  • [PATCH v2 2/2] block: set S_IFBLK for block devices instead of S_IFCHR, Ahmad Fatoum
  • Re: [PATCH v2 1/2] commands: ls: explicitly check for directories with S_ISDIR, Sascha Hauer
• [PATCH] ARM: cpuinfo: print exception level, Ahmad Fatoum
  • Re: [PATCH] ARM: cpuinfo: print exception level, Sascha Hauer
• [PATCH 0/7] ARM: stm32mp: bbu: add FIP update handler, Ahmad Fatoum
  • [PATCH 7/7] fastboot: support TF-A FSBL and FIP images for barebox update, Ahmad Fatoum
  • [PATCH 1/7] bbu: move barebox_update eMMC boot handling into common code, Ahmad Fatoum
  • [PATCH 3/7] bbu: add flag for enabling eMMC boot ack, Ahmad Fatoum
  • [PATCH 4/7] bbu: export bbu_std_file_handler for use in custom handlers, Ahmad Fatoum
  • [PATCH 2/7] bbu: use free(NULL) to simplify function cleanup, Ahmad Fatoum
  • [PATCH 6/7] ARM: stm32mp: bbu: add FIP update handler, Ahmad Fatoum
  • [PATCH 5/7] filetype: differentiate between STM32MP FSBL and SSBL images, Ahmad Fatoum
  • Re: [PATCH 0/7] ARM: stm32mp: bbu: add FIP update handler, Sascha Hauer
• [PATCH] ARM: OMAP: xload: Fix compile without CONFIG_MTD, Alexander Shiyan
  • Re: [PATCH] ARM: OMAP: xload: Fix compile without CONFIG_MTD, Sascha Hauer
  • Re: [PATCH] ARM: OMAP: xload: Fix compile without CONFIG_MTD, Ahmad Fatoum
    • Re: [PATCH] ARM: OMAP: xload: Fix compile without CONFIG_MTD, Alexander Shiyan
      • Re: [PATCH] ARM: OMAP: xload: Fix compile without CONFIG_MTD, Ahmad Fatoum
        • Re: [PATCH] ARM: OMAP: xload: Fix compile without CONFIG_MTD, Alexander Shiyan
  • Re: [PATCH] ARM: OMAP: xload: Fix compile without CONFIG_MTD, Sascha Hauer
• [PATCH 0/5] Misc fixes, Alexander Shiyan
  • [PATCH 2/5] ARM: boards: Fix unconditional compilation of imx51-babbage directory, Alexander Shiyan
    • Re: [PATCH 2/5] ARM: boards: Fix unconditional compilation of imx51-babbage directory, Sascha Hauer
      • Re: [PATCH 2/5] ARM: boards: Fix unconditional compilation of imx51-babbage directory, Ahmad Fatoum
  • [PATCH 3/5] drivers: soc: Fix unconditional compilation of imx directory, Alexander Shiyan
  • [PATCH 4/5] globalvar: Add missing empty prototype for globalvar_set(), Alexander Shiyan
  • [PATCH 1/5] ARM: at91sam9n12ek: Use xz compression, Alexander Shiyan
  • [PATCH 5/5] of: Fix of_prepend_machine_compatible() defined but unused warning, Alexander Shiyan
  • Re: [PATCH 0/5] Misc fixes, Sascha Hauer
• [PATCH 0/3] arm: rockchip: add support for the radxa rock3 board, Michael Riesch
  • [PATCH 2/3] HACK: add device tree for radxa rock3 model a, Michael Riesch
  • [PATCH 1/3] HACK: add device trees for rk3568, Michael Riesch
  • [PATCH 3/3] arm: rockchip: add support for the radxa rock3 board, Michael Riesch
  • Re: [PATCH 0/3] arm: rockchip: add support for the radxa rock3 board, Sascha Hauer
• [PATCH] fastboot: inform user if barebox update falls back to raw copy, Ahmad Fatoum
  • Re: [PATCH] fastboot: inform user if barebox update falls back to raw copy, Ahmad Fatoum
  • Re: [PATCH] fastboot: inform user if barebox update falls back to raw copy, Sascha Hauer
    • Re: [PATCH] fastboot: inform user if barebox update falls back to raw copy, Ahmad Fatoum
      • Re: [PATCH] fastboot: inform user if barebox update falls back to raw copy, Sascha Hauer
• [PATCH master v2] ARM: cpu: don't clobber sp when booted in HYP mode, Ahmad Fatoum
  • Re: [PATCH master v2] ARM: cpu: don't clobber sp when booted in HYP mode, Sascha Hauer
• [PATCH] ARM: nxp-imx8mq-evk: install Barebox into eMMC boot partitions, Lucas Stach
  • Re: [PATCH] ARM: nxp-imx8mq-evk: install Barebox into eMMC boot partitions, Sascha Hauer
• [PATCH master] ARM: rpi: reinstate support for multiple variants with same DT, Ahmad Fatoum
  • Re: [PATCH master] ARM: rpi: reinstate support for multiple variants with same DT, Sascha Hauer
• [PATCH RESEND master] PBL: fdt: fix /memory parsing when #address-cells != #size-cells, Ahmad Fatoum
  • Re: [PATCH RESEND master] PBL: fdt: fix /memory parsing when #address-cells != #size-cells, Sascha Hauer
• [PATCH master] ARM: cpu: don't clobber sp when booted in HYP mode, Ahmad Fatoum
  • Re: [PATCH master] ARM: cpu: don't clobber sp when booted in HYP mode, Sascha Hauer
• [PATCH] .gitignore: Add directories generated by MAKEALL script, Alexander Shiyan
  • Re: [PATCH] .gitignore: Add directories generated by MAKEALL script, Sascha Hauer
• [PATCH] ARM: DTS: myir-x335x: Add GPIO aliases, Alexander Shiyan
  • Re: [PATCH] ARM: DTS: myir-x335x: Add GPIO aliases, Marco Felsch
    • Re: [PATCH] ARM: DTS: myir-x335x: Add GPIO aliases, Alexander Shiyan
      • Re: [PATCH] ARM: DTS: myir-x335x: Add GPIO aliases, Marco Felsch
  • Re: [PATCH] ARM: DTS: myir-x335x: Add GPIO aliases, Ahmad Fatoum
    • Re: [PATCH] ARM: DTS: myir-x335x: Add GPIO aliases, Marco Felsch
    • Re: [PATCH] ARM: DTS: myir-x335x: Add GPIO aliases, Alexander Shiyan
      • Re: [PATCH] ARM: DTS: myir-x335x: Add GPIO aliases, Ahmad Fatoum
        • Re: [PATCH] ARM: DTS: myir-x335x: Add GPIO aliases, Alexander Shiyan
          • Re: [PATCH] ARM: DTS: myir-x335x: Add GPIO aliases, Ahmad Fatoum
  • Re: [PATCH] ARM: DTS: myir-x335x: Add GPIO aliases, Sascha Hauer
• [PATCH] ARM: myir-x335x: Fix memory size detect, Alexander Shiyan
  • Re: [PATCH] ARM: myir-x335x: Fix memory size detect, Sascha Hauer
• [PATCH v2] ARM: clps711x: Switch to devicetree usage, Alexander Shiyan
  • Re: [PATCH v2] ARM: clps711x: Switch to devicetree usage, Sascha Hauer
• [PATCH 1/8] console: add new $global.bootm.earlycon parameter, Ahmad Fatoum
  • [PATCH 2/8] serial: ns16550: add $global.bootm.earlycon fixup support, Ahmad Fatoum
  • [PATCH 3/8] serial: amba-pl011: add $global.bootm.earlycon fixup support, Ahmad Fatoum
  • [PATCH 7/8] serial: lpuart: add $global.bootm.earlycon fixup support, Ahmad Fatoum
  • [PATCH 4/8] serial: atmel: add $global.bootm.earlycon fixup support, Ahmad Fatoum
  • [PATCH 8/8] video: efi_gop: add $global.bootm.earlycon fixup for framebuffer console, Ahmad Fatoum
  • [PATCH 5/8] serial: imx: add $global.bootm.earlycon fixup support, Ahmad Fatoum
    • Re: [PATCH 5/8] serial: imx: add $global.bootm.earlycon fixup support, Sascha Hauer
      • Re: [PATCH 5/8] serial: imx: add $global.bootm.earlycon fixup support, Ahmad Fatoum
        • Re: [PATCH 5/8] serial: imx: add $global.bootm.earlycon fixup support, Sascha Hauer
          • Re: [PATCH 5/8] serial: imx: add $global.bootm.earlycon fixup support, Ahmad Fatoum
            • Re: [PATCH 5/8] serial: imx: add $global.bootm.earlycon fixup support, Sascha Hauer
  • [PATCH 6/8] serial: litex: add linux console/earlycon fixup support, Ahmad Fatoum
• [PATCH master 1/2] test: self: add basic testing for malloc(), Ahmad Fatoum
  • [PATCH master 2/2] tlsf: fix internal overflow trying to allocate big buffers, Ahmad Fatoum
  • Re: [PATCH master 1/2] test: self: add basic testing for malloc(), Sascha Hauer
• [PATCH] usb: usb251xb: remove duplicate status line on probe success, Ahmad Fatoum
  • Re: [PATCH] usb: usb251xb: remove duplicate status line on probe success, Marco Felsch
    • Re: [PATCH] usb: usb251xb: remove duplicate status line on probe success, Ahmad Fatoum
      • Re: [PATCH] usb: usb251xb: remove duplicate status line on probe success, Marco Felsch
        • Re: [PATCH] usb: usb251xb: remove duplicate status line on probe success, Ahmad Fatoum
          • Re: [PATCH] usb: usb251xb: remove duplicate status line on probe success, Marco Felsch
            • Re: [PATCH] usb: usb251xb: remove duplicate status line on probe success, Sascha Hauer
• [PATCH] arm: imx: mmdc_size: Increase row_max for imx8m, Teresa Remmet
  • Re: [PATCH] arm: imx: mmdc_size: Increase row_max for imx8m, Sascha Hauer
  • Re: [PATCH] arm: imx: mmdc_size: Increase row_max for imx8m, Ahmad Fatoum
    • Re: [PATCH] arm: imx: mmdc_size: Increase row_max for imx8m, Teresa Remmet
      • Re: [PATCH] arm: imx: mmdc_size: Increase row_max for imx8m, Ahmad Fatoum
        • Re: [PATCH] arm: imx: mmdc_size: Increase row_max for imx8m, Teresa Remmet
          • Re: [PATCH] arm: imx: mmdc_size: Increase row_max for imx8m, Ahmad Fatoum
            • Re: [PATCH] arm: imx: mmdc_size: Increase row_max for imx8m, Teresa Remmet
• [PATCH 1/2] Documentation: boards: stm32mp: document USB bootstrap via DFU, Ahmad Fatoum
  • [PATCH 2/2] Documentation: user: usb: fix literal block :: when : is intended, Ahmad Fatoum
  • Re: [PATCH 1/2] Documentation: boards: stm32mp: document USB bootstrap via DFU, Sascha Hauer
• [PATCH] ARM: clps711x: Switch to devicetree usage, Alexander Shiyan
  • Re: [PATCH] ARM: clps711x: Switch to devicetree usage, Ahmad Fatoum
    • Re: [PATCH] ARM: clps711x: Switch to devicetree usage, Alexander Shiyan
      • Re: [PATCH] ARM: clps711x: Switch to devicetree usage, Sascha Hauer
• [PATCH] clk: fix clk_round_rate command description, Denis Orlov
  • Re: [PATCH] clk: fix clk_round_rate command description, Sascha Hauer
• Driver load order, Frank Wunderlich
  • Re: Driver load order, Sascha Hauer
    • Aw: Re: Driver load order, Frank Wunderlich
      • Re: Aw: Re: Driver load order, Ahmad Fatoum
        • Re: Aw: Re: Driver load order, Sascha Hauer
          • Aw: Re: Re: Driver load order, Frank Wunderlich
          • Aw: Re: Re: Driver load order, Frank Wunderlich
            • Re: Aw: Re: Re: Driver load order, Ahmad Fatoum
              • Aw: Re: Re: Re: Driver load order, Frank Wunderlich
                • Re: Aw: Re: Re: Re: Driver load order, Ahmad Fatoum
  • [PATCH 1/2] regmap: implement regmap_init_i2c_smbus, Ahmad Fatoum
    • [PATCH 2/2] regulator: add Rockchip rk808 support, Ahmad Fatoum
  • Re: Driver load order, Ahmad Fatoum
    • Re: Driver load order, Ahmad Fatoum
• [PATCH] gpiolib: fix allocating dynamic gpio numbers., Sascha Hauer
• [PATCH] of: address: treat absent dma-ranges as 1:1 translation, Lucas Stach
  • Re: [PATCH] of: address: treat absent dma-ranges as 1:1 translation, Sascha Hauer
• v2022.05.0, Sascha Hauer
  • Re: v2022.05.0, Alexander Shiyan
    • Re: v2022.05.0, Sascha Hauer
• [PATCH] clk: fix clk_round_rate() behaviour, Denis Orlov
  • Re: [PATCH] clk: fix clk_round_rate() behaviour, Sascha Hauer
    • Re: [PATCH] clk: fix clk_round_rate() behaviour, Денис Орлов
• [RFC PATCH v1 0/8] ARM: at91: Add pbl support to skov-arm9cpu, Sam Ravnborg
  • [PATCH v1 2/8] ARM: at91: Provide at91_mux_pio_pin for use in lowlevel, Sam Ravnborg
  • [PATCH v1 3/8] ARM: at91: Add at91sam9 xload_mmc for PBL use, Sam Ravnborg
  • [PATCH v1 6/8] ARM: at91: Make sdramc.h useable in multi image builds, Sam Ravnborg
  • [PATCH v1 5/8] ARM: at91: Add lowlevel helpers for at91sam9263, Sam Ravnborg
  • [PATCH v1 4/8] ARM: at91: Add extra register definitions, Sam Ravnborg
  • [PATCH v1 1/8] pwm: atmel: Fix build and update, Sam Ravnborg
  • [PATCH v1 7/8] ARM: at91: Add initialize function to sdramc, Sam Ravnborg
    • Re: [PATCH v1 7/8] ARM: at91: Add initialize function to sdramc, Ahmad Fatoum
      • Re: [PATCH v1 7/8] ARM: at91: Add initialize function to sdramc, Sam Ravnborg
  • [PATCH v1 8/8] ARM: at91: Add xload support to skov-arm9cpu, Sam Ravnborg
    • Re: [PATCH v1 8/8] ARM: at91: Add xload support to skov-arm9cpu, Ahmad Fatoum
      • Re: [PATCH v1 8/8] ARM: at91: Add xload support to skov-arm9cpu, Sam Ravnborg
        • Re: [PATCH v1 8/8] ARM: at91: Add xload support to skov-arm9cpu, Ahmad Fatoum
          • Re: [PATCH v1 8/8] ARM: at91: Add xload support to skov-arm9cpu, Ahmad Fatoum
  • Re: [RFC PATCH v1 0/8] ARM: at91: Add pbl support to skov-arm9cpu, Sam Ravnborg
  • Re: [RFC PATCH v1 0/8] ARM: at91: Add pbl support to skov-arm9cpu, Sam Ravnborg
    • Re: [RFC PATCH v1 0/8] ARM: at91: Add pbl support to skov-arm9cpu, Ahmad Fatoum
      • Re: [RFC PATCH v1 0/8] ARM: at91: Add pbl support to skov-arm9cpu, Sam Ravnborg
        • Re: [RFC PATCH v1 0/8] ARM: at91: Add pbl support to skov-arm9cpu, Ahmad Fatoum
• [urgent] ARM: rockchip: fix iodomain for r2pro V1.0, Frank Wunderlich
  • Re: [urgent] ARM: rockchip: fix iodomain for r2pro V1.0, Sascha Hauer
  • Re: [urgent] ARM: rockchip: fix iodomain for r2pro V1.0, Sascha Hauer
    • Re: [urgent] ARM: rockchip: fix iodomain for r2pro V1.0, Frank Wunderlich
• [PATCH] Documentation: x86: boot: reserve type_of_loader=13 for barebox, Ahmad Fatoum
  • Re: [PATCH] Documentation: x86: boot: reserve type_of_loader=13 for barebox, Borislav Petkov
    • Re: [PATCH] Documentation: x86: boot: reserve type_of_loader=13 for barebox, Ahmad Fatoum
      • Re: [PATCH] Documentation: x86: boot: reserve type_of_loader=13 for barebox, Borislav Petkov
• [PATCH] ARM: imx: esdctl: fix LPDDR4 size calculation, Lucas Stach
  • Re: [PATCH] ARM: imx: esdctl: fix LPDDR4 size calculation, Sascha Hauer
  • Re: [PATCH] ARM: imx: esdctl: fix LPDDR4 size calculation, Teresa Remmet
    • Re: [PATCH] ARM: imx: esdctl: fix LPDDR4 size calculation, Lucas Stach
      • Re: [PATCH] ARM: imx: esdctl: fix LPDDR4 size calculation, Teresa Remmet
• [PATCH v2] ARM: i.MX7: esdctl: fix out-of-bounds read on memory size calculation, Ahmad Fatoum
  • Re: [PATCH v2] ARM: i.MX7: esdctl: fix out-of-bounds read on memory size calculation, Sascha Hauer
• One barebox image for multiple boards, Matthias Fend
  • Re: One barebox image for multiple boards, Sam Ravnborg
    • Re: One barebox image for multiple boards, Matthias Fend
      • Re: One barebox image for multiple boards, Ahmad Fatoum
        • Re: One barebox image for multiple boards, Trent Piepho
      • Re: One barebox image for multiple boards, Sascha Hauer
  • Re: One barebox image for multiple boards, Sascha Hauer
    • Re: One barebox image for multiple boards, Matthias Fend
      • Re: One barebox image for multiple boards, Sascha Hauer
        • Re: One barebox image for multiple boards, Matthias Fend
• [PATCH master] ARM: i.MX7: esdctl: fix out-of-bounds read on memory size calculation, Ahmad Fatoum
• [PATCH v2] net: dns: Generate and verify transaction ID, Jules Maselbas
  • Re: [PATCH v2] net: dns: Generate and verify transaction ID, Sascha Hauer
• [PATCH v2] clk: handle NULL args in clk_{g,s}et_parent(), Bastian Krause
  • Re: [PATCH v2] clk: handle NULL args in clk_{g,s}et_parent(), Ahmad Fatoum
• [PATCH] clk: handle NULL args in clk_set_parent(), Bastian Krause
  • Re: [PATCH] clk: handle NULL args in clk_set_parent(), Ahmad Fatoum
  • Re: [PATCH] clk: handle NULL args in clk_set_parent(), Sascha Hauer
    • Re: [PATCH] clk: handle NULL args in clk_set_parent(), Bastian Krause
      • Re: [PATCH] clk: handle NULL args in clk_set_parent(), Sascha Hauer
• [PATCH] i2c: rockchip: fix transfer return value, Ahmad Fatoum
  • Re: [PATCH] i2c: rockchip: fix transfer return value, Sascha Hauer
• [PATCH] i2c: add Cadence i2c host controller support, Matthias Fend
  • Re: [PATCH] i2c: add Cadence i2c host controller support, Sascha Hauer
• [PATCH v1 1/2] ARM: boards: protonic-stm32mp1: enable deep-probe support, Oleksij Rempel
  • [PATCH v1 2/2] ARM: dts: stm32mp151-prtt1c: add DSA switch and MDIO nodes, Oleksij Rempel
  • Re: [PATCH v1 1/2] ARM: boards: protonic-stm32mp1: enable deep-probe support, Sascha Hauer
• [PATCH v1 1/2] usb: dwc2: add support st,stm32mp15-fs/hsotg devices, Oleksij Rempel
  • [PATCH v1 2/2] phy: stm32-usphyc: Add dummy driver for child node, Oleksij Rempel
  • Re: [PATCH v1 1/2] usb: dwc2: add support st,stm32mp15-fs/hsotg devices, Sascha Hauer
• [PATCH 0/2] align rk356x drivers as preparation for mainline dts, Michael Riesch
  • [PATCH 1/2] phy: rockchip: align naneng-combphy clocks and resets with binding, Michael Riesch
  • [PATCH 2/2] usb: dwc3: align dwc3 clocks with binding, Michael Riesch
  • Aw: [PATCH 0/2] align rk356x drivers as preparation for mainline dts, Frank Wunderlich
  • Re: [PATCH 0/2] align rk356x drivers as preparation for mainline dts, Sascha Hauer
• [PATCH] ata: ahci: use correct macro when calculating offsets in dma memory, Denis Orlov
  • Re: [PATCH] ata: ahci: use correct macro when calculating offsets in dma memory, Sascha Hauer
• [PATCH] net: dns: Generate and verify transaction ID, Jules Maselbas
  • [PATCH] fixup! net: dns: Generate and verify transaction ID, Jules Maselbas
    • Re: [PATCH] fixup! net: dns: Generate and verify transaction ID, Jules Maselbas
    • Re: [PATCH] fixup! net: dns: Generate and verify transaction ID, Jules Maselbas
  • Re: [PATCH] net: dns: Generate and verify transaction ID, Jules Maselbas
    • Re: [PATCH] net: dns: Generate and verify transaction ID, Sascha Hauer
• [RFC] ARM: OMAP: debug_ll: Add support for PBL console, Alexander Shiyan
  • Re: [RFC] ARM: OMAP: debug_ll: Add support for PBL console, Sascha Hauer
• [PATCH 00/15] ARM: rpi: add basic Raspberry Pi 4 support, Ahmad Fatoum
  • [PATCH 15/15] doc: bcm283x: reference newer firmware, Ahmad Fatoum
  • [PATCH 09/15] serial: ns16550: rpi: skip baudrate changes for bcm2711, Ahmad Fatoum
  • [PATCH 03/15] serial: ns16550: rpi: remove ungating now done by proper clk driver, Ahmad Fatoum
  • [PATCH 02/15] of: address: fix printing of OF node name in error message, Ahmad Fatoum
  • [PATCH 05/15] ARM: rpi: add Raspberry Pi 3 64-bit build support, Ahmad Fatoum
  • [PATCH 08/15] mci: bcm2835: add bcm2711-emmc2 (Rpi4) support, Ahmad Fatoum
  • [PATCH 01/15] PBL: fdt: fix /memory parsing when #address-cells != #size-cells, Ahmad Fatoum
  • [PATCH 13/15] ARM: rpi: add heuristic for skipping detection of SDIO card, Ahmad Fatoum
  • [PATCH 06/15] ARM: rpi: rpi3: disallow MMU_EARLY && 64BIT, Ahmad Fatoum
  • [PATCH 04/15] ARM: cpu: prevent recursive dependencies via CPU_SUPPORTS_64BIT_KERNEL, Ahmad Fatoum
  • [PATCH 12/15] ARM: rpi: add debug_ll support for Raspberry Pi 4, Ahmad Fatoum
  • [PATCH 07/15] clk: rpi: add Raspberry Pi 4 support, Ahmad Fatoum
  • [PATCH 14/15] doc: bcm283x: add initial docs for Raspberry Pi 4 support, Ahmad Fatoum
  • [PATCH 11/15] ARM: rpi: add Raspberry Pi 4 support, Ahmad Fatoum
  • [PATCH 10/15] clocksource: bcm2835: bump below architeced timer for AArch64, Ahmad Fatoum
  • Re: [PATCH 00/15] ARM: rpi: add basic Raspberry Pi 4 support, Ahmad Fatoum
• [PATCH] ARM: OMAP: debug_ll: Use Kconfig UART base address, Alexander Shiyan
  • Re: [PATCH] ARM: OMAP: debug_ll: Use Kconfig UART base address, Lucas Stach
    • Re: [PATCH] ARM: OMAP: debug_ll: Use Kconfig UART base address, Alexander Shiyan
      • Re: [PATCH] ARM: OMAP: debug_ll: Use Kconfig UART base address, Ahmad Fatoum
  • Re: [PATCH] ARM: OMAP: debug_ll: Use Kconfig UART base address, Sascha Hauer
    • Re: [PATCH] ARM: OMAP: debug_ll: Use Kconfig UART base address, Alexander Shiyan
• [PATCH] ARM: omap: Cleanup omap4_revision, Alexander Shiyan
  • Re: [PATCH] ARM: omap: Cleanup omap4_revision, Sascha Hauer
• [PATCH 1/8] rsatoc: fix compiler warnings, Sascha Hauer
  • [PATCH 3/8] crypto: simplify $(srctree)/ handling and remove config_filename macro, Sascha Hauer
  • [PATCH 5/8] rsa: Add iterator for rsa keys, Sascha Hauer
  • [PATCH 7/8] rsa: Turn error messages into debug messages, Sascha Hauer
  • [PATCH 2/8] rsatoc: Add option to print dts output, Sascha Hauer
  • [PATCH 4/8] rsa: Collect keys on list, Sascha Hauer
  • [PATCH 6/8] rsa: Add pr_fmt and use pr_debug, Sascha Hauer
  • [PATCH 8/8] fit: try other keys as fallback, Sascha Hauer
• [PATCH 01/16] ata: ahci: use abstract read/write functions uniformly, Denis Orlov
  • [PATCH 02/16] ata: ahci: replace magic numbers with named constants, Denis Orlov
  • [PATCH 03/16] ata: ahci: fix missing whitespace in ahci_add_host(), Denis Orlov
  • [PATCH 04/16] ata: ahci: simplify fis structure creation, Denis Orlov
  • [PATCH 05/16] ata: ahci: do not ignore dma handles, Denis Orlov
  • [PATCH 06/16] ata: ahci: adjust debug messages in ahci_init_port(), Denis Orlov
  • [PATCH 07/16] ata: ahci: correct named constants values and names, Denis Orlov
  • [PATCH 09/16] ata: ahci: use named constants for capabilities bits, Denis Orlov
  • [PATCH 08/16] ata: ahci: properly fill scatter/gather table, Denis Orlov
  • [PATCH 10/16] ata: ahci: map buffers properly, Denis Orlov
  • [PATCH 11/16] ata: ahci: use 64-bit addressing if available, Denis Orlov
  • [PATCH 12/16] ata: ahci: make rx_fis field in ahci_port of type void*, Denis Orlov
  • [PATCH 14/16] ata: ahci: remove redundant cast in ahci_io(), Denis Orlov
  • [PATCH 13/16] ata: ahci: add missing capability in ahci_print_info(), Denis Orlov
  • [PATCH 16/16] ata: ahci: allocate memory in one call in ahci_init_port(), Denis Orlov
  • [PATCH 15/16] ata: ahci: register only implemented ports, Denis Orlov
  • Re: [PATCH 01/16] ata: ahci: use abstract read/write functions uniformly, Sascha Hauer
• Trouver-un-candidat "Me faire référencer sur le site", Trouver-un-candidat
• i2c: Rockchip i2c controller support, Matthias Fend
  • Re: i2c: Rockchip i2c controller support, Ahmad Fatoum
• [PATCH v6 0/5] add different OF board fixups, Oleksij Rempel
  • [PATCH v6 2/5] ARM: boards: protonic-imx6: make use of barebox_set_serial_number(), Oleksij Rempel
  • [PATCH v6 3/5] of: add generic of_prepend_machine_compatible(), Oleksij Rempel
  • [PATCH v6 1/5] common: add $global.serial_number with device tree fixup, Oleksij Rempel
  • [PATCH v6 4/5] ARM: boards: skov-imx6: make use of of_prepend_machine_compatible(), Oleksij Rempel
  • [PATCH v6 5/5] ARM: boards: protonic-imx6: add HW revision specific machine compatible, Oleksij Rempel
  • Re: [PATCH v6 0/5] add different OF board fixups, Sascha Hauer
• [PATCH] ARM: karo-tx6x: Fix DCD check operations, Sascha Hauer
• [PATCH v5 0/5] add different OF board fixups, Oleksij Rempel
  • [PATCH v5 4/5] ARM: boards: skov-imx6: make use of of_fixup_machine_compatible(), Oleksij Rempel
  • [PATCH v5 2/5] ARM: boards: protonic-imx6: make use of barebox_set_serial_number(), Oleksij Rempel
  • [PATCH v5 5/5] ARM: boards: protonic-imx6: add HW revision specific machine compatible, Oleksij Rempel
  • [PATCH v5 1/5] common: add $global.serial_number with device tree fixup, Oleksij Rempel
  • [PATCH v5 3/5] of: add generic of_fixup_machine_compatible(), Oleksij Rempel
    • Re: [PATCH v5 3/5] of: add generic of_fixup_machine_compatible(), Sascha Hauer
• [PATCH master] ARM: rpi: fix CM3 breakage after multi-image rework, Ahmad Fatoum
  • Re: [PATCH master] ARM: rpi: fix CM3 breakage after multi-image rework, Sascha Hauer
• [PATCH master] Documentation: boards: stm32mp: elaborate on how to build, Ahmad Fatoum
  • Re: [PATCH master] Documentation: boards: stm32mp: elaborate on how to build, Sascha Hauer
• [PATCH] firmware: zynqmp-fpga: do not load PL with ONLY_BIN flag unless necessary, Matthias Fend
  • Re: [PATCH] firmware: zynqmp-fpga: do not load PL with ONLY_BIN flag unless necessary, Michael Tretter
    • Re: [PATCH] firmware: zynqmp-fpga: do not load PL with ONLY_BIN flag unless necessary, Matthias Fend
• Boot from SD if SD-Card is present - Beaglebone Black, Konstantin Kletschke
  • Re: Boot from SD if SD-Card is present - Beaglebone Black, Ahmad Fatoum
    • Re: Boot from SD if SD-Card is present - Beaglebone Black, Konstantin Kletschke
      • Re: Boot from SD if SD-Card is present - Beaglebone Black, Sascha Hauer
        • Re: Boot from SD if SD-Card is present - Beaglebone Black, Konstantin Kletschke
          • Re: Boot from SD if SD-Card is present - Beaglebone Black, Sascha Hauer
            • Re: Boot from SD if SD-Card is present - Beaglebone Black, Konstantin Kletschke
            • Re: Boot from SD if SD-Card is present - Beaglebone Black, Konstantin Kletschke
              • Re: Boot from SD if SD-Card is present - Beaglebone Black, Ahmad Fatoum
                • Re: Boot from SD if SD-Card is present - Beaglebone Black, Konstantin Kletschke
• [PATCH v4 0/5] add different OF board fixups, Oleksij Rempel
  • [PATCH v4 5/5] ARM: boards: protonic-imx6: add HW revision specific machine compatible, Oleksij Rempel
  • [PATCH v4 1/5] common: add $global.serial_number with device tree fixup, Oleksij Rempel
  • [PATCH v4 3/5] of: add generic of_fixup_machine_compatible(), Oleksij Rempel
  • [PATCH v4 2/5] ARM: boards: protonic-imx6: make use of barebox_set_serial_number(), Oleksij Rempel
  • [PATCH v4 4/5] ARM: boards: skov-imx6: make use of of_fixup_machine_compatible(), Oleksij Rempel
• [PATCH v3 0/5] add different OF board fixups, Oleksij Rempel
  • [PATCH v3 1/5] common: add $global.serial_number with device tree fixup, Oleksij Rempel
    • Re: [PATCH v3 1/5] common: add $global.serial_number with device tree fixup, Jules Maselbas
    • Re: [PATCH v3 1/5] common: add $global.serial_number with device tree fixup, Ulrich Ölmann
      • Re: [PATCH v3 1/5] common: add $global.serial_number with device tree fixup, Oleksij Rempel
    • Re: [PATCH v3 1/5] common: add $global.serial_number with device tree fixup, Sascha Hauer
  • [PATCH v3 3/5] of: add generic of_fixup_machine_compatible(), Oleksij Rempel
    • Re: [PATCH v3 3/5] of: add generic of_fixup_machine_compatible(), Sascha Hauer
  • [PATCH v3 2/5] ARM: boards: protonic-imx6: make use of barebox_set_serial_number(), Oleksij Rempel
  • [PATCH v3 4/5] ARM: boards: skov-imx6: make use of of_fixup_machine_compatible(), Oleksij Rempel
  • [PATCH v3 5/5] ARM: boards: protonic-imx6: add HW revision specific machine compatible, Oleksij Rempel
• [PATCH v2 0/4] add different OF board fixups, Oleksij Rempel
  • [PATCH v2 2/4] ARM: boards: protonic-imx6: make use of barebox_set_serial_number(), Oleksij Rempel
  • [PATCH v2 4/4] ARM: boards: skov-imx6: make use of of_fixup_machine_compatible(), Oleksij Rempel
  • [PATCH v2 1/4] common: add $global.serial_number with device tree fixup, Oleksij Rempel
  • [PATCH v2 3/4] of: add generic of_fixup_machine_compatible(), Oleksij Rempel
    • Re: [PATCH v2 3/4] of: add generic of_fixup_machine_compatible(), Ahmad Fatoum
      • Re: [PATCH v2 3/4] of: add generic of_fixup_machine_compatible(), Oleksij Rempel
        • Re: [PATCH v2 3/4] of: add generic of_fixup_machine_compatible(), Ahmad Fatoum
• [PATCH v1 1/5] common: add $global.serial_number with device tree fixup, Oleksij Rempel
  • [PATCH v1 3/5] of: add generic of_fixup_machine_compatible(), Oleksij Rempel
    • Re: [PATCH v1 3/5] of: add generic of_fixup_machine_compatible(), Ahmad Fatoum
  • [PATCH v1 2/5] ARM: boards: protonic-imx6: make use of barebox_set_serial_number(), Oleksij Rempel
  • [PATCH v1 4/5] ARM: boards: skov-imx6: make use of of_fixup_machine_compatible(), Oleksij Rempel
  • [PATCH v1 5/5] ARM: boards: protonic-imx6: add HW revision specific machine compatible, Oleksij Rempel
    • Re: [PATCH v1 5/5] ARM: boards: protonic-imx6: add HW revision specific machine compatible, Ahmad Fatoum
• [PATCH v1] net: dsa: wait until PHY aneg is done, Oleksij Rempel
  • Re: [PATCH v1] net: dsa: wait until PHY aneg is done, Sascha Hauer
• [PATCH master] mci: stm32_sdmmc2: add STM32MP131 AMBA primecell peripheral ID, Ahmad Fatoum
  • Re: [PATCH master] mci: stm32_sdmmc2: add STM32MP131 AMBA primecell peripheral ID, Sascha Hauer
• [PATCH] ata: disk_ata_drive: clean up code in ata_dump_id(), Denis Orlov
  • Re: [PATCH] ata: disk_ata_drive: clean up code in ata_dump_id(), Sascha Hauer
• [PATCH v3] arm: boards: Add support for MYIR MYD-AM335X Development Board, Alexander Shiyan
  • Re: [PATCH v3] arm: boards: Add support for MYIR MYD-AM335X Development Board, Sascha Hauer
• [PATCH] Documentation: remote-control: be explicit about python2 requirement, Ahmad Fatoum
  • Re: [PATCH] Documentation: remote-control: be explicit about python2 requirement, Sascha Hauer
• [PATCH] gpiolib: remove declaration of now unused variable, Ahmad Fatoum
  • Re: [PATCH] gpiolib: remove declaration of now unused variable, Sascha Hauer
• [PATCH v2 1/2] spi: Port SiFive SPI controller driver, Ahmad Fatoum
  • [PATCH v2 2/2] RISC-V: sifive: enable SPI Flash and SD in config, Ahmad Fatoum
    • Re: [PATCH v2 2/2] RISC-V: sifive: enable SPI Flash and SD in config, Antony Pavlov
      • Re: [PATCH v2 2/2] RISC-V: sifive: enable SPI Flash and SD in config, Ahmad Fatoum
        • Re: [PATCH v2 2/2] RISC-V: sifive: enable SPI Flash and SD in config, Antony Pavlov
        • Re: [PATCH v2 2/2] RISC-V: sifive: enable SPI Flash and SD in config, Antony Pavlov
  • Re: [PATCH v2 1/2] spi: Port SiFive SPI controller driver, Sascha Hauer
• [PATCH] Documentation: boards: i.MX8MP-EVK: Fix typo, Sascha Hauer
• [PATCH] clk: imx8mp: remove SYS PLL 1/2 clock gates, Sascha Hauer
• [PATCH master v3 0/3] ARM: rpi3: fix misc recent breakage, Ahmad Fatoum
  • [PATCH master v3 1/3] ARM: asm: fix miscompilation of 32-bit ENTRY_FUNCTION_WITHSTACK, Ahmad Fatoum
  • [PATCH master v3 2/3] clk: add BCM2835 auxiliary peripheral clock driver, Ahmad Fatoum
  • [PATCH master v3 3/3] clocksource: assign non-zero priorities to all clocksources, Ahmad Fatoum
  • Re: [PATCH master v3 0/3] ARM: rpi3: fix misc recent breakage, Sascha Hauer
• [PATCH 0/4] ARM: rpi: enable single entry point for all, Ahmad Fatoum
  • [PATCH 3/4] ARM: rpi: remove outdated comment after stack setup rework, Ahmad Fatoum
  • [PATCH 4/4] ARM: configs: rpi: add and document single barebox-dt-2nd bootloader, Ahmad Fatoum
  • [PATCH 2/4] ARM: rpi: don't warn about lack of videocore fdt, Ahmad Fatoum
  • [PATCH 1/4] ARM: cpu: board-dt-2nd: call arm_cpu_lowlevel_init, Ahmad Fatoum
  • Re: [PATCH 0/4] ARM: rpi: enable single entry point for all, Sascha Hauer
• [PATCH master v2 0/3] ARM: rpi3: fix misc recent breakage, Ahmad Fatoum
  • [PATCH master v2 1/3] ARM: asm: fix miscompilation of 32-bit ENTRY_FUNCTION_WITHSTACK, Ahmad Fatoum
    • Re: [PATCH master v2 1/3] ARM: asm: fix miscompilation of 32-bit ENTRY_FUNCTION_WITHSTACK, Ahmad Fatoum
  • [PATCH master v2 2/3] clk: add BCM2835 auxiliary peripheral clock driver, Ahmad Fatoum
  • [PATCH master v2 3/3] clocksource: assign non-zero priorities to all clocksources, Ahmad Fatoum
• [PATCH master 0/3] ARM: rpi3: fix misc recent breakage, Ahmad Fatoum
  • [PATCH master 1/3] ARM: asm: fix miscompilation of 32-bit ENTRY_FUNCTION_WITHSTACK, Ahmad Fatoum
  • [PATCH master 2/3] clk: add BCM2835 auxiliary peripheral clock driver, Ahmad Fatoum
  • [PATCH master 3/3] clocksource: assign non-zero priorities to all clocksources, Ahmad Fatoum
• [PATCH] serial: ns16550: Reuse 16550 serial for tegra UART, Alexander Shiyan
  • Re: [PATCH] serial: ns16550: Reuse 16550 serial for tegra UART, Sascha Hauer
• [PATCH v2] arm: boards: Add support for MYIR MYD-AM335X Development Board, Alexander Shiyan
  • Re: [PATCH v2] arm: boards: Add support for MYIR MYD-AM335X Development Board, Sascha Hauer
• [PATCH] video: omap-fb: Rework to enable COMPILE_TEST option, Alexander Shiyan
  • Re: [PATCH] video: omap-fb: Rework to enable COMPILE_TEST option, Sascha Hauer
• v2022.04.0, Sascha Hauer
• [PATCH] arm: boards: Add support for MYIR MYD-AM335X Development Board, Alexander Shiyan
  • Re: [PATCH] arm: boards: Add support for MYIR MYD-AM335X Development Board, Sascha Hauer
    • Re: [PATCH] arm: boards: Add support for MYIR MYD-AM335X Development Board, Alexander Shiyan
      • Re: [PATCH] arm: boards: Add support for MYIR MYD-AM335X Development Board, Sascha Hauer
        • Re: [PATCH] arm: boards: Add support for MYIR MYD-AM335X Development Board, Alexander Shiyan
          • Re: [PATCH] arm: boards: Add support for MYIR MYD-AM335X Development Board, Sascha Hauer
            • Re: [PATCH] arm: boards: Add support for MYIR MYD-AM335X Development Board, Alexander Shiyan
• [PATCH 1/2] mtd: peb: Add mtd_peb_read_file(), Sascha Hauer
  • [PATCH 2/2] ARM: omap: xload: read from unpartitioned device, Sascha Hauer
• [PATCH v2] ARM: pbab01: allow USB-OTG port runtime configuration, Andrej Picej
  • Re: [PATCH v2] ARM: pbab01: allow USB-OTG port runtime configuration, Sascha Hauer
• [PATCH] GPIO: clps711x: Simplify initialization, Alexander Shiyan
  • Re: [PATCH] GPIO: clps711x: Simplify initialization, Sascha Hauer
• [PATCH] ARM: pbab01: allow USB-OTG port runtime configuration, Andrej Picej
  • Re: [PATCH] ARM: pbab01: allow USB-OTG port runtime configuration, Ahmad Fatoum
    • Re: [PATCH] ARM: pbab01: allow USB-OTG port runtime configuration, Andrej Picej
• [PATCH] ARM: omap: xload: Do not create partitions, Sascha Hauer
• [PATCH 1/3] ARM: CCMX51: Remove excess assignment, Alexander Shiyan
  • [PATCH 2/3] ARM: CCMX51: Add support for low-level debug, Alexander Shiyan
  • [PATCH 3/3] ARM: CCMX51: Add support for 16-bit memory module variants, Alexander Shiyan
  • Re: [PATCH 1/3] ARM: CCMX51: Remove excess assignment, Sascha Hauer
• AM335x MLO failed to boot, Alexander Shiyan
  • Re: AM335x MLO failed to boot, Sascha Hauer
    • Re: AM335x MLO failed to boot, Alexander Shiyan
      • Re: AM335x MLO failed to boot, Sascha Hauer
• [PATCH v1] net: phy: add TI DP83TD510E T1L PHY support, Oleksij Rempel
  • Re: [PATCH v1] net: phy: add TI DP83TD510E T1L PHY support, Sascha Hauer
• [PATCH v1] net: phy: do not call adjust_link() form phy_device_attach(), Oleksij Rempel
  • Re: [PATCH v1] net: phy: do not call adjust_link() form phy_device_attach(), Sascha Hauer
• [PATCH v1] net: designware: eqos: fix link speed configuration for speed < 1000, Oleksij Rempel
  • Re: [PATCH v1] net: designware: eqos: fix link speed configuration for speed < 1000, Ahmad Fatoum
    • Re: [PATCH v1] net: designware: eqos: fix link speed configuration for speed < 1000, Oleksij Rempel
• [PATCH v5 00/14] provide DSA support, Oleksij Rempel
  • [PATCH v5 08/14] net: mdio: add MDIO_DEVAD_NONE define, Oleksij Rempel
  • [PATCH v5 10/14] of_net: add rev-rmii support, Oleksij Rempel
  • [PATCH v5 07/14] spi: port spi_sync_transfer() function from kernel v5.17, Oleksij Rempel
  • [PATCH v5 05/14] driver: add dev_get_priv() helper, Oleksij Rempel
  • [PATCH v5 06/14] net: port part of if_vlan header from kernel v5.17, Oleksij Rempel
  • [PATCH v5 01/14] net: add RX preprocessor support, Oleksij Rempel
  • [PATCH v5 09/14] net: phy: make sure MDIO bus is probed if we search for the PHY, Oleksij Rempel
  • [PATCH v5 14/14] add ethlog command, Oleksij Rempel
  • [PATCH v5 03/14] net: phy: export of_phy_register_fixed_link() function, Oleksij Rempel
  • [PATCH v5 13/14] hexdump: provide support for dev_print_hex_dump(), Oleksij Rempel
  • [PATCH v5 04/14] net: add DSA framework to support basic switch functionality, Oleksij Rempel
  • [PATCH v5 02/14] net: add of_find_eth_device_by_node() function, Oleksij Rempel
  • [PATCH v5 12/14] net: dsa: add KSZ9477 switch SPI driver, Oleksij Rempel
    • Re: [PATCH v5 12/14] net: dsa: add KSZ9477 switch SPI driver, Ahmad Fatoum
      • Re: [PATCH v5 12/14] net: dsa: add KSZ9477 switch SPI driver, Oleksij Rempel
  • [PATCH v5 11/14] net: dsa: add support for SJA11xx switches, Oleksij Rempel
  • Re: [PATCH v5 00/14] provide DSA support, Sascha Hauer
• [PATCH 1/2] phy: freescale: imx8mq-usb: add support for i.MX8MP PHY, Lucas Stach
  • [PATCH 2/2] usb: dwc3: of-simple: add i.MX8MP compatible, Lucas Stach
  • Re: [PATCH 1/2] phy: freescale: imx8mq-usb: add support for i.MX8MP PHY, Sascha Hauer
• [PATCH] ARM: Rockchip: Update DTS for BPI-R2Pro for new HW-Rev, Frank Wunderlich
  • Re: [PATCH] ARM: Rockchip: Update DTS for BPI-R2Pro for new HW-Rev, Sascha Hauer
• [no subject], Unknown
• [PATCH] ARM: fix GCC 11.x build failures for ARMv7, Ian Abbott
  • Re: [PATCH] ARM: fix GCC 11.x build failures for ARMv7, Sascha Hauer
• [PATCH] video: ipuv3: combine two subsequent info prints into one, Ahmad Fatoum
  • Re: [PATCH] video: ipuv3: combine two subsequent info prints into one, Sascha Hauer
• [PATCH v4 00/13] provide DSA support, Oleksij Rempel
  • [PATCH v4 07/13] spi: port spi_sync_transfer() function from kernel v5.17, Oleksij Rempel
  • [PATCH v4 09/13] net: phy: make sure MDIO bus is probed if we search for the PHY, Oleksij Rempel
  • [PATCH v4 10/13] of_net: add rev-rmii support, Oleksij Rempel
  • [PATCH v4 02/13] net: add of_find_eth_device_by_node() function, Oleksij Rempel
  • [PATCH v4 06/13] net: port part of if_vlan header from kernel v5.17, Oleksij Rempel
  • [PATCH v4 03/13] net: phy: export of_phy_register_fixed_link() function, Oleksij Rempel
  • [PATCH v4 13/13] add ethlog command, Oleksij Rempel
    • Re: [PATCH v4 13/13] add ethlog command, Sascha Hauer
  • [PATCH v4 08/13] net: mdio: add MDIO_DEVAD_NONE define, Oleksij Rempel
  • [PATCH v4 04/13] net: add DSA framework to support basic switch functionality, Oleksij Rempel
    • Re: [PATCH v4 04/13] net: add DSA framework to support basic switch functionality, Sascha Hauer
  • [PATCH v4 01/13] net: add RX preprocessor support, Oleksij Rempel
    • Re: [PATCH v4 01/13] net: add RX preprocessor support, Sascha Hauer
      • Re: [PATCH v4 01/13] net: add RX preprocessor support, Oleksij Rempel
  • [PATCH v4 05/13] driver: add dev_get_priv() helper, Oleksij Rempel
  • [PATCH v4 12/13] net: dsa: add KSZ9477 switch SPI driver, Oleksij Rempel
    • Re: [PATCH v4 12/13] net: dsa: add KSZ9477 switch SPI driver, Sascha Hauer
  • [PATCH v4 11/13] net: dsa: add support for SJA11xx switches, Oleksij Rempel
    • Re: [PATCH v4 11/13] net: dsa: add support for SJA11xx switches, Sascha Hauer
• [PATCH v3 00/12] provide DSA support, Oleksij Rempel
  • [PATCH v3 07/12] net: mdio: add MDIO_DEVAD_NONE define, Oleksij Rempel
  • [PATCH v3 06/12] spi: port spi_sync_transfer() function from kernel v5.17, Oleksij Rempel
  • [PATCH v3 12/12] add ethlog, Oleksij Rempel
  • [PATCH v3 09/12] of_net: add rev-rmii support, Oleksij Rempel
  • [PATCH v3 03/12] net: add DSA framework to support basic switch functionality, Oleksij Rempel
    • Re: [PATCH v3 03/12] net: add DSA framework to support basic switch functionality, Sascha Hauer
    • Re: [PATCH v3 03/12] net: add DSA framework to support basic switch functionality, Sascha Hauer
  • [PATCH v3 01/12] net: add RX preprocessor support, Oleksij Rempel
  • [PATCH v3 04/12] driver: add dev_get_priv() helper, Oleksij Rempel
  • [PATCH v3 05/12] net: port part of if_vlan header from kernel v5.17, Oleksij Rempel
  • [PATCH v3 08/12] net: phy: make sure MDIO bus is probed if we search for the PHY, Oleksij Rempel
  • [PATCH v3 02/12] net: add of_find_eth_device_by_node() function, Oleksij Rempel
    • Re: [PATCH v3 02/12] net: add of_find_eth_device_by_node() function, Sascha Hauer
  • [PATCH v3 11/12] net: dsa: add KSZ9477 switch SPI driver, Oleksij Rempel
    • Re: [PATCH v3 11/12] net: dsa: add KSZ9477 switch SPI driver, Sascha Hauer
  • [PATCH v3 10/12] net: dsa: add support for SJA11xx switches, Oleksij Rempel
    • Re: [PATCH v3 10/12] net: dsa: add support for SJA11xx switches, Sascha Hauer
• [PATCH v1 1/2] net: designware: eqos: fix receive issue with external switch, Oleksij Rempel
  • [PATCH v1 2/2] net: designware: eqos: do not try to talk to not existing PHY, Oleksij Rempel
    • Re: [PATCH v1 2/2] net: designware: eqos: do not try to talk to not existing PHY, Ahmad Fatoum
      • Re: [PATCH v1 2/2] net: designware: eqos: do not try to talk to not existing PHY, Oleksij Rempel
  • Re: [PATCH v1 1/2] net: designware: eqos: fix receive issue with external switch, Ahmad Fatoum
  • Re: [PATCH v1 1/2] net: designware: eqos: fix receive issue with external switch, Sascha Hauer
• [PATCH v1] ARM: dts: at91-microchip-ksz9477-evb: start using kernel DT, Oleksij Rempel
  • Re: [PATCH v1] ARM: dts: at91-microchip-ksz9477-evb: start using kernel DT, Ahmad Fatoum
    • Re: [PATCH v1] ARM: dts: at91-microchip-ksz9477-evb: start using kernel DT, Oleksij Rempel
  • Re: [PATCH v1] ARM: dts: at91-microchip-ksz9477-evb: start using kernel DT, Sascha Hauer
• [PATCH v2 00/12] provide DSA support, Oleksij Rempel
  • [PATCH v2 07/12] net: mdio: add MDIO_DEVAD_NONE define, Oleksij Rempel
  • [PATCH v2 01/12] net: add RX preprocessor support, Oleksij Rempel
  • [PATCH v2 05/12] net: port part of if_vlan header from kernel v5.17, Oleksij Rempel
  • [PATCH v2 08/12] net: phy: make sure MDIO bus is probed if we search for the PHY, Oleksij Rempel
  • [PATCH v2 09/12] of_net: add rev-rmii support, Oleksij Rempel
  • [PATCH v2 04/12] driver: add dev_get_priv() helper, Oleksij Rempel
  • [PATCH v2 06/12] spi: port spi_sync_transfer() function from kernel v5.17, Oleksij Rempel
  • [PATCH v2 02/12] net: add of_find_eth_device_by_node() function, Oleksij Rempel
  • [PATCH v2 11/12] net: dsa: add KSZ9477 switch SPI driver, Oleksij Rempel
  • [PATCH v2 03/12] net: add DSA framework to support basic switch functionality, Oleksij Rempel
  • [PATCH v2 10/12] net: dsa: add support for SJA11xx switches, Oleksij Rempel
  • [PATCH v2 12/12] add ethlog, Oleksij Rempel
• [ANNOUNCEMENT] Getting more of Barebox, Jules Maselbas
  • Re: Getting more of Barebox, Ahmad Fatoum
    • Re: Getting more of Barebox, Jules Maselbas
• [PATCH] gpio: allocate dynamic gpio numbers top down, Sascha Hauer
  • Re: [PATCH] gpio: allocate dynamic gpio numbers top down, Andrej Picej
• [PATCH] ata: ide-sff: fix integer overflow in ata_wait_busy(), Denis Orlov
  • Re: [PATCH] ata: ide-sff: fix integer overflow in ata_wait_busy(), Sascha Hauer
• [PATCH v2 1/2] of: implement new of_device_ensure_probed_by_alias_stem, Andrej Picej
  • [PATCH v2 2/2] ARM: boards: phytec-som-imx6: probe all gpio devices before PMIC, Andrej Picej
  • Re: [PATCH v2 1/2] of: implement new of_device_ensure_probed_by_alias_stem, Sascha Hauer
    • Re: [PATCH v2 1/2] of: implement new of_device_ensure_probed_by_alias_stem, Andrej Picej
• [PATCH v1 1/1] ARM: boards: protonic-imx6: fix file system access warning, Oleksij Rempel
  • Re: [PATCH v1 1/1] ARM: boards: protonic-imx6: fix file system access warning, Sascha Hauer
• Board code with 2 dts, Frank Wunderlich
  • Re: Board code with 2 dts, Ahmad Fatoum
    • Aw: Re: Board code with 2 dts, Frank Wunderlich
      • Re: Aw: Re: Board code with 2 dts, Ahmad Fatoum
        • change r2pro dts to public hw version (was "Board code with 2 dts" ), Frank Wunderlich
          • Re: change r2pro dts to public hw version (was "Board code with 2 dts" ), Oleksij Rempel
            • Re: change r2pro dts to public hw version (was "Board code with 2 dts" ), Frank Wunderlich
              • Re: change r2pro dts to public hw version (was "Board code with 2 dts" ), Oleksij Rempel
                • Aw: Re: change r2pro dts to public hw version (was "Board code with 2 dts" ), Frank Wunderlich
                  • Re: change r2pro dts to public hw version (was "Board code with 2 dts" ), Oleksij Rempel
                    • Re: change r2pro dts to public hw version (was "Board code with 2 dts" ), Trent Piepho
                      • Re: change r2pro dts to public hw version (was "Board code with 2 dts" ), Oleksij Rempel
                        • Re: change r2pro dts to public hw version (was "Board code with 2 dts" ), Frank Wunderlich
                        • Re: change r2pro dts to public hw version (was "Board code with 2 dts" ), Trent Piepho
                          • Re: change r2pro dts to public hw version (was "Board code with 2 dts" ), Oleksij Rempel
                            • Re: change r2pro dts to public hw version (was "Board code with 2 dts" ), Trent Piepho
                              • Aw: Re: change r2pro dts to public hw version (was "Board code with 2 dts" ), Frank Wunderlich
• [PATCH] ARM: dts: stm32mp: remove no-longer required DT override, Ahmad Fatoum
  • Re: [PATCH] ARM: dts: stm32mp: remove no-longer required DT override, Sascha Hauer
• [PATCH v2 1/3] ARM: webasto-ccbv2: consider the available memory size for optee, Juergen Borleis
  • [PATCH v2 3/3] ARM: webasto-marvel: share the run-time setup with the ccbv2 variant, Juergen Borleis
  • [PATCH v2 2/3] ARM: webasto-marvel: add device tree shared with the kernel, Juergen Borleis
  • Re: [PATCH v2 1/3] ARM: webasto-ccbv2: consider the available memory size for optee, Sascha Hauer
• [PATCH 1/2] net: phy: mv88e6xxx: implement port_set_speed for mv88e6250, Steffen Trumtrar
  • [PATCH 2/2] net: phy: mv88e6xxx: add support for mv88e6250, Steffen Trumtrar
  • Re: [PATCH 1/2] net: phy: mv88e6xxx: implement port_set_speed for mv88e6250, Sascha Hauer
• [PATCH] gpio: include header for BIT() used in <gpio.h>, Ahmad Fatoum
  • Re: [PATCH] gpio: include header for BIT() used in <gpio.h>, Sascha Hauer
• [PATCH v1 0/9] add basic DSA support, Oleksij Rempel
  • [PATCH v1 7/9] net: mdio: add MDIO_DEVAD_NONE define, Oleksij Rempel
  • [PATCH v1 1/9] net: add RX preprocessor support, Oleksij Rempel
  • [PATCH v1 8/9] net: phy: make sure MDIO bus is probed if we search for the PHY, Oleksij Rempel
  • [PATCH v1 4/9] driver: add dev_get_priv() helper, Oleksij Rempel
  • [PATCH v1 2/9] net: add of_find_eth_device_by_node() function, Oleksij Rempel
  • [PATCH v1 5/9] net: port part of if_vlan header from kernel v5.17, Oleksij Rempel
  • [PATCH v1 6/9] spi: port spi_sync_transfer() function from kernel v5.17, Oleksij Rempel
  • [PATCH v1 3/9] net: add DSA framework to support basic switch functionality, Oleksij Rempel
    • Re: [PATCH v1 3/9] net: add DSA framework to support basic switch functionality, Oleksij Rempel
    • Re: [PATCH v1 3/9] net: add DSA framework to support basic switch functionality, Sascha Hauer
      • Re: [PATCH v1 3/9] net: add DSA framework to support basic switch functionality, Oleksij Rempel
  • [PATCH v1 9/9] net: dsa: add support for SJA11xx switches, Oleksij Rempel
    • Re: [PATCH v1 9/9] net: dsa: add support for SJA11xx switches, Sascha Hauer
• [PATCH v1 1/2] ARM: boards: protonic-imx6: add board specific BBU SD handlers, Oleksij Rempel
  • [PATCH v1 2/2] ARM: boards: protonic-imx6: properly configure RGMII direction for the FEC MAC, Oleksij Rempel
  • Re: [PATCH v1 1/2] ARM: boards: protonic-imx6: add board specific BBU SD handlers, Sascha Hauer
• [PATCH master 0/6] usb: gadget: multi: fix bind error path, Ahmad Fatoum
  • [PATCH master 4/6] usb: gadget: mass-storage: reference count allocations used in bthread, Ahmad Fatoum
  • [PATCH master 2/6] usb: gadget: don't register UMS with empty function, Ahmad Fatoum
  • [PATCH master 6/6] usb: gadget: multi: free UMS instance at multi_unbind time, Ahmad Fatoum
  • [PATCH master 5/6] usb: gadget: multi: fix broken handling of USB function bind error, Ahmad Fatoum
  • [PATCH master 1/6] usb: gadget: implement and use system_partitions_get_null, Ahmad Fatoum
  • [PATCH master 3/6] usb: gadget: mass-storage: fix clean up of file descriptors, Ahmad Fatoum
  • Re: [PATCH master 0/6] usb: gadget: multi: fix bind error path, Sascha Hauer
• [PATCH] ARM: asm: setjmp: add missing .pop_section, Ahmad Fatoum
  • Re: [PATCH] ARM: asm: setjmp: add missing .pop_section, Sascha Hauer
• [PATCH 1/4] spi: Port SiFive SPI controller driver, Ahmad Fatoum
  • [PATCH 3/4] mtd: spi-nor: add support for ISSI IS25WP256, Ahmad Fatoum
  • [PATCH 2/4] mci: mci_spi: extend driver for device tree probing, Ahmad Fatoum
    • Re: [PATCH 2/4] mci: mci_spi: extend driver for device tree probing, Sascha Hauer
      • Re: [PATCH 2/4] mci: mci_spi: extend driver for device tree probing, Ahmad Fatoum
  • [PATCH 4/4] RISC-V: sifive: enable SPI Flash and SD in config, Ahmad Fatoum
  • Re: [PATCH 1/4] spi: Port SiFive SPI controller driver, Sascha Hauer
• [PATCH] partitions: efi: print GPT offset in debug message, Ahmad Fatoum
  • Re: [PATCH] partitions: efi: print GPT offset in debug message, Sascha Hauer
• [PATCH] sandbox: board: add stickypage.bin into .gitignore, Ahmad Fatoum
  • Re: [PATCH] sandbox: board: add stickypage.bin into .gitignore, Sascha Hauer
• [PATCH] scripts: remove non-existent bareboxstate binaries from .gitignore, Ahmad Fatoum
  • Re: [PATCH] scripts: remove non-existent bareboxstate binaries from .gitignore, Sascha Hauer
• [PATCH] libfile: implement new pread_full, Ahmad Fatoum
  • Re: [PATCH] libfile: implement new pread_full, Sascha Hauer