ср, 25 мая 2022 г. в 11:16, Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>: > On 25.05.22 08:27, Alexander Shiyan wrote: > > вт, 24 мая 2022 г. в 15:28, Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>: > >> On 24.05.22 09:30, Alexander Shiyan wrote: > >>> For the correct work of GPIO driver, we need to define aliases. > >>> Let's add them to the devicetree. > > ... > >>> diff --git a/arch/arm/dts/am335x-myirtech-myd.dts b/arch/arm/dts/am335x-myirtech-myd.dts > >>> index 6ec65e533d..1ea0f2a440 100644 > >>> --- a/arch/arm/dts/am335x-myirtech-myd.dts > >>> +++ b/arch/arm/dts/am335x-myirtech-myd.dts > >>> @@ -6,6 +6,13 @@ > >>> #include <arm/am335x-myirtech-myd.dts> > >> > >> Other boards do #include "am33xx.dtsi", which takes care of these > >> aliases. It's probably better you include that too. > > > > Including this file results in an error. > > > > Changed to: > > #include "am33xx.dtsi" > > #include <arm/am335x-myirtech-myd.dts> > > > > Output: > > DTC arch/arm/dts/am335x-myirtech-myd.dtb > > Error: /home/ARM/barebox/dts/src/arm/am335x-myirtech-myd.dts:6.1-9 syntax error > > FATAL ERROR: Unable to parse input tree > > > > Most likely this is the result of double inclusion of the file arm/am33xx.dtsi, > > first time from "am33xx.dtsi" and second from arm/am335x-myirtech-myd.dts. > > Hi, you need to include if after the upstream DT. That's why it doesn't have > a /dts-v1/; Yes, if "am33xx.dtsi" is after <arm/am335x-myirtech-myd.dts>, it compiles fine. But in this case, upstreaming <arm/am33xx.dtsi> (from local am33xx.dtsi) overwrites any binding changes from the board file. _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
