Re: [PATCH 0/11] ARM: at91: Add pbl support to skov-arm9cpu

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 28, 2022 at 10:38:38PM +0200, Sam Ravnborg wrote:
> The following is the current set of patches so far to support
> PBL for the skov-arm9cpu.
> 
> The pwm is not really part of this - but it is part of the story.
> The patch-set was triggered when someone reported a bug in the 
> atmel pwm code. The code did not build - so I ported it over.
> Now I wanted to boot the target, but at91bootstrap no longer
> supports the at91sam9263. So I decided to try to make it work
> in barebox. I have tried this before and failed - but it should
> be possible...
> 
> What I have made is modelled on top of all the great work
> for other more modern atmel bouards.
> 
> v2:
>  - The first stage bootloader works - thanks to feedback from Ahmad!
>  - Add support for non-high capacity SD cards, as required by at91sam9 (Ahmad)
>  - Replace hardcoded delay loops with pit based early delays (Ahmad)
>  - Several adjustments to skov-arm9cpu code to fit the changes
> 
> The following patches are not ready:
> - atmel_lcdfb: add support for updated DT bindings
> - ARM: at91: Update DTS for skov-arm9cpu
> 
> They both rely on updated bindings that has not landed yet,
> and which may end up not being compatible with the changes
> implemented here.
> So the patches works - but bindings are work-in-progress.
> 
> My plan is to resurrect my drm driver for at91sam9 and
> with that the update the binding file. But timeline
> for this work is unknowm.
> 
> In other words - I assume patch 1 to 8 + 10 as ready.
> Patch 9 + 11 are WIP.
> 
> 	Sam
> 
> Sam Ravnborg (11):
>       pwm: atmel: Fix build and update
>       ARM: at91: Make sdramc.h useable in multi image builds
>       ARM: at91: Add initialize function to sdramc
>       ARM: at91: Provide at91_mux_pio_pin for use in lowlevel
>       mci: atmel_mci: Add PBL helper to configure highcapacity
>       ARM: at91: Add at91sam9 xload_mmc for PBL use
>       ARM: at91: Add extra register definitions
>       ARM: at91: Add lowlevel helpers for at91sam9263
>       atmel_lcdfb: add support for updated DT bindings
>       ARM: at91: Add xload support to skov-arm9cpu
>       ARM: at91: Update DTS for skov-arm9cpu

Applied 1-8, thanks

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |




[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux