The mini uart (Pins 8/10) is the primary UART on the Raspberry Pi 4 and
can be set up in firmware by specifying enable_uart=1 in the config.txt.
Add a DEBUG_LL implementation to use this for early debugging.
Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
---
arch/arm/mach-bcm283x/include/mach/debug_ll.h | 21 +++++++++++++++++++
arch/arm/mach-bcm283x/include/mach/platform.h | 1 +
common/Kconfig | 7 +++++++
3 files changed, 29 insertions(+)
diff --git a/arch/arm/mach-bcm283x/include/mach/debug_ll.h b/arch/arm/mach-bcm283x/include/mach/debug_ll.h
index 4bfa5abc7c41..e4274e5279a5 100644
--- a/arch/arm/mach-bcm283x/include/mach/debug_ll.h
+++ b/arch/arm/mach-bcm283x/include/mach/debug_ll.h
@@ -18,6 +18,7 @@
#define __MACH_BCM2835_DEBUG_LL_H__
#include <mach/platform.h>
+#include <io.h>
#ifdef CONFIG_DEBUG_RPI1_UART
@@ -66,6 +67,26 @@ static inline void debug_ll_init(void)
debug_ll_ns16550_init(divisor);
}
+
+#elif defined CONFIG_DEBUG_RPI4_MINI_UART
+
+static inline uint8_t debug_ll_read_reg(int reg)
+{
+ return readb(BCM2711_MINIUART_BASE + (reg << 2));
+}
+
+static inline void debug_ll_write_reg(int reg, uint8_t val)
+{
+ writeb(val, BCM2711_MINIUART_BASE + (reg << 2));
+}
+
+#include <debug_ll/ns16550.h>
+
+static inline void debug_ll_init(void)
+{
+ /* Configured by ROM */
+}
+
#endif
#endif /* __MACH_BCM2835_DEBUG_LL_H__ */
diff --git a/arch/arm/mach-bcm283x/include/mach/platform.h b/arch/arm/mach-bcm283x/include/mach/platform.h
index 6917e1f345d7..b957ac8de35e 100644
--- a/arch/arm/mach-bcm283x/include/mach/platform.h
+++ b/arch/arm/mach-bcm283x/include/mach/platform.h
@@ -34,6 +34,7 @@
#define BCM2836_PL011_BASE 0x3f201000UL
#define BCM2835_MINIUART_BASE 0x20215040
#define BCM2836_MINIUART_BASE 0x3f215040UL
+#define BCM2711_MINIUART_BASE 0xfe215040UL
#endif
diff --git a/common/Kconfig b/common/Kconfig
index f7a6a96e877c..4054bd838dec 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -1413,6 +1413,13 @@ config DEBUG_RPI3_MINI_UART
Say Y here if you want low-level debugging support on
RaspberryPi 3 board mini UART.
+config DEBUG_RPI4_MINI_UART
+ bool "RaspberryPi 4 mini UART"
+ depends on ARCH_BCM283X
+ help
+ Say Y here if you want low-level debugging support on
+ RaspberryPi 4 board mini UART.
+
config DEBUG_ERIZO
bool "Erizo ns16550 port"
depends on SOC_ERIZO
--
2.30.2
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
