Re: [PATCH v3] ARM: i.MX8MP: adapt atf bl31 base address

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jul 04, 2022 at 06:52:56PM +0200, Marco Felsch wrote:
> With i.MX8MP A1 silicon the OCRAM space is extended to 576KB whereas
> the pre-release silicon has only 512KB. So the upstream TF-A adapted the
> base address to move BL31 to the last 128KB of the OCRAM.
> 
> The adaption was a bit messy because each version changed it:
>  - v2.4 base addr = 0x960000 (original)
>  - v2.5 base addr = 0x970000 (adapted to new silicon revision)
>  - v2.6 base addr = 0x960000 (changed back by accident)
>  - v2.7 base addr = 0x970000 (accident fixed)
> 
> With v2.7 it is correctly set for A1 silicon onwards and we strongly
> recommend to use this version or newer.
> 
> This commit also adapts the documentation for the i.MX8MP-EVK to
> reference the upstream TF-A and to point out our favorite version.
> 
> Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
> ---

Applied, thanks+

Sascha

> Changelog:
> 
> v3:
> - rephrase the complete commit message. Sry. again for the previouse
>   noise.
> v2:
> - fix commit message ger/eng mixup and mention tapeout version A1
> 
>  Documentation/boards/imx/nxp-imx8mp-evk.rst | 11 +++++++----
>  arch/arm/mach-imx/include/mach/atf.h        |  2 +-
>  2 files changed, 8 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/boards/imx/nxp-imx8mp-evk.rst b/Documentation/boards/imx/nxp-imx8mp-evk.rst
> index 366c1de500..1074992f2f 100644
> --- a/Documentation/boards/imx/nxp-imx8mp-evk.rst
> +++ b/Documentation/boards/imx/nxp-imx8mp-evk.rst
> @@ -40,15 +40,18 @@ As a last step of this process those files need to be placed in
>  	      firmware/${f}; \
>    done
>  
> -Get and Build the ARM Trusted firmware
> ---------------------------------------
> +Get and Build the Trusted Firmware A
> +------------------------------------
>  
> -Get ATF from https://source.codeaurora.org/external/imx/imx-atf, branch
> -imx_5.4.3_2.0.0::
> +Get TF-A from https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/ and
> +checkout version v2.7::
>  
>    make PLAT=imx8mp bl31
>    cp build/imx8mp/release/bl31.bin ${barebox_srctree}/imx8mp-bl31.bin
>  
> +.. warning:: It is important to use a version >= v2.7 else your system
> +   might not boot.
> +
>  Build Barebox
>  -------------
>  
> diff --git a/arch/arm/mach-imx/include/mach/atf.h b/arch/arm/mach-imx/include/mach/atf.h
> index 09396f4646..bc400ddbad 100644
> --- a/arch/arm/mach-imx/include/mach/atf.h
> +++ b/arch/arm/mach-imx/include/mach/atf.h
> @@ -10,7 +10,7 @@
>  
>  #define MX8MM_ATF_BL31_BASE_ADDR	0x00920000
>  #define MX8MN_ATF_BL31_BASE_ADDR	0x00960000
> -#define MX8MP_ATF_BL31_BASE_ADDR	0x00960000
> +#define MX8MP_ATF_BL31_BASE_ADDR	0x00970000
>  #define MX8MQ_ATF_BL31_BASE_ADDR	0x00910000
>  #define MX8M_ATF_BL33_BASE_ADDR		0x40200000
>  #define MX8MM_ATF_BL33_BASE_ADDR	MX8M_ATF_BL33_BASE_ADDR
> -- 
> 2.30.2
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |




[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux