On Mon, Jul 04, 2022 at 11:24:08AM +0200, Ahmad Fatoum wrote: > With DDR firmware, ARM trusted firmware and possibly OP-TEE, we are > already quite short on SRAM, so it makes sense to always use compressed > device trees on the i.MX8M to shift some of the size from PBL into > barebox proper. Select ARM_USE_COMPRESSED_DTB for the i.MX8M boards. > > Follow-up commit will touch all i.MX8M boards we have in tree that do > not yet make use of this. > > Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> > --- > arch/arm/mach-imx/Kconfig | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) Applied, thanks Sascha > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index c9f03f8aaddd..83ea0059ca35 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -183,6 +183,7 @@ config ARCH_IMX8M > select HW_HAS_PCI > select IMX8M_DRAM > select PBL_VERIFY_PIGGY if HABV4 > + select ARM_USE_COMPRESSED_DTB > > config ARCH_IMX8MM > select ARCH_IMX8M > @@ -514,7 +515,6 @@ config MACH_ZII_IMX8MQ_DEV > select ARM_SMCCC > select MCI_IMX_ESDHC_PBL > select MACH_ZII_COMMON > - select ARM_USE_COMPRESSED_DTB > > config MACH_ZII_VF610_DEV > bool "ZII VF610 Dev Family" > @@ -574,7 +574,6 @@ config MACH_NXP_IMX8MN_EVK > select MCI_IMX_ESDHC_PBL > select IMX8M_DRAM > select I2C_IMX_EARLY > - select ARM_USE_COMPRESSED_DTB > > config MACH_NXP_IMX8MP_EVK > bool "NXP i.MX8MP EVK Board" > -- > 2.30.2 > > > -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
