This updates skov-arm9cpu with xload support, and we can now
use barebox as a replacment for at91bootstrap.
Only boot via SD card is supported.
NOTE: Actual status
[x] dbgu support in pbl works (can print)
[x] Other init stuff ifdeffed out - from at91bootstrap
[ ] Check what the original code used for div/mul - there is some confusion
[ ] load barebox.bin and boots it. Right now mount fails
[ ] barebox.bin can start a linux kernel
[ ] support default SD card boots and nfsboot
[x] update Kconfig to work with xload
[x] xload image support
Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
---
arch/arm/boards/skov-arm9cpu/lowlevel.c | 148 ++++++++----------------
arch/arm/mach-at91/Kconfig | 4 +-
images/Makefile.at91 | 5 +
3 files changed, 55 insertions(+), 102 deletions(-)
diff --git a/arch/arm/boards/skov-arm9cpu/lowlevel.c b/arch/arm/boards/skov-arm9cpu/lowlevel.c
index d335953a7..b408246b6 100644
--- a/arch/arm/boards/skov-arm9cpu/lowlevel.c
+++ b/arch/arm/boards/skov-arm9cpu/lowlevel.c
@@ -1,115 +1,69 @@
// SPDX-License-Identifier: GPL-2.0
-// PDX-FileCopyrightText: 2018 Sam Ravnborg <sam@xxxxxxxxxxxx>
+// PDX-FileCopyrightText: 2022 Sam Ravnborg <sam@xxxxxxxxxxxx>
-#include <linux/sizes.h>
+#include <debug_ll.h>
#include <asm/barebox-arm.h>
-#include <mach/at91sam926x_board_init.h>
#include <mach/at91sam9263_matrix.h>
+#include <mach/at91sam9_sdramc.h>
+#include <mach/sam92_ll.h>
+#include <mach/xload.h>
-#define MASTER_PLL_MUL 171
-#define MASTER_PLL_DIV 14
+/* MCK = 20 MHz */
+#define MAIN_CLOCK 200000000
+#define MASTER_CLOCK (MAIN_CLOCK / 2) /* PMC_MCKR divides by 2 */
-static void __bare_init skovarm9cpu_board_config(struct at91sam926x_board_cfg *cfg)
+static void sam9263_sdramc_init(unsigned int mck)
{
- /* Disable Watchdog */
- cfg->wdt_mr =
- AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |
- AT91_WDT_WDV |
- AT91_WDT_WDDIS |
- AT91_WDT_WDD;
+ const struct at91sam9_sdramc_config config =
+ {
+ .sdramc = IOMEM(AT91SAM9263_BASE_SDRAMC0),
+ .mr = 0,
+ .tr = (mck * 7) / 1000000, // TODO 140 versus 0x13c (316)?
+ .cr = AT91_SDRAMC_NC_10 | AT91_SDRAMC_NR_13 | AT91_SDRAMC_CAS_2
+ | AT91_SDRAMC_NB_4 | AT91_SDRAMC_DBW_32
+ | AT91_SDRAMC_TWR_2 | AT91_SDRAMC_TRC_7
+ | AT91_SDRAMC_TRP_2 | AT91_SDRAMC_TRCD_2
+ | AT91_SDRAMC_TRAS_5 | AT91_SDRAMC_TXSR_8,
+ .lpr = 0,
+ .mdr = AT91_SDRAMC_MD_SDRAM,
+ };
+
+ /* Define PDC[31:16] as DATA[31:16] */
+ at91_mux_gpio_disable(IOMEM(AT91SAM9263_BASE_PIOD), 0xffff0000);
+ /* No pull-up for D[31:16] */
+ at91_mux_set_pullup(IOMEM(AT91SAM9263_BASE_PIOD), 0xffff0000, true);
+ /* PD16 to PD31 are pheripheral A */
+ at91_mux_set_A_periph(IOMEM(AT91SAM9263_BASE_PIOD), 0xffff0000);
- /* define PDC[31:16] as DATA[31:16] */
- cfg->ebi_pio_pdr = 0xFFFF0000;
- /* no pull-up for D[31:16] */
- cfg->ebi_pio_ppudr = 0xFFFF0000;
/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
- cfg->ebi_csa =
- AT91SAM9263_MATRIX_EBI0_DBPUC | AT91SAM9263_MATRIX_EBI0_VDDIOMSEL_3_3V |
- AT91SAM9263_MATRIX_EBI0_CS1A_SDRAMC;
+ writel(AT91SAM9263_MATRIX_EBI0_DBPUC
+ | AT91SAM9263_MATRIX_EBI0_VDDIOMSEL_3_3V
+ | AT91SAM9263_MATRIX_EBI0_CS1A_SDRAMC,
+ IOMEM(AT91SAM9263_BASE_MATRIX + AT91SAM9263_MATRIX_EBI0CSA));
- cfg->smc_cs = 0;
- cfg->smc_mode =
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_DBW_16 |
- AT91_SMC_TDFMODE |
- AT91_SMC_TDF_(6);
- cfg->smc_cycle =
- AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22);
- cfg->smc_pulse =
- AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) |
- AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11);
- cfg->smc_setup =
- AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) |
- AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10);
-
- cfg->pmc_mor =
- AT91_PMC_MOSCEN |
- (255 << 8); /* Main Oscillator Start-up Time */
- cfg->pmc_pllar =
- AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */
- AT91_PMC_OUT |
- AT91_PMC_PLLCOUNT | /* PLL Counter */
- (2 << 28) | /* PLL Clock Frequency Range */
- ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV);
- /* PCK/2 = MCK Master Clock from PLLA */
- cfg->pmc_mckr1 =
- AT91_PMC_CSS_SLOW |
- AT91_PMC_PRES_1 |
- AT91SAM9_PMC_MDIV_2 |
- AT91_PMC_PDIV_1;
- /* PCK/2 = MCK Master Clock from PLLA */
- cfg->pmc_mckr2 =
- AT91_PMC_CSS_PLLA |
- AT91_PMC_PRES_1 |
- AT91SAM9_PMC_MDIV_2 |
- AT91_PMC_PDIV_1;
-
- /* SDRAM */
- /* SDRAMC_TR - Refresh Timer register */
- cfg->sdrc_tr1 = 0x13C;
- /* SDRAMC_CR - Configuration register*/
- cfg->sdrc_cr =
- AT91_SDRAMC_NC_10 | /* Assume 128MiB */
- AT91_SDRAMC_NR_13 |
- AT91_SDRAMC_NB_4 |
- AT91_SDRAMC_CAS_3 |
- AT91_SDRAMC_DBW_32 |
- (1 << 8) | /* Write Recovery Delay */
- (7 << 12) | /* Row Cycle Delay */
- (2 << 16) | /* Row Precharge Delay */
- (2 << 20) | /* Row to Column Delay */
- (5 << 24) | /* Active to Precharge Delay */
- (1 << 28); /* Exit Self Refresh to Active Delay */
-
- /* Memory Device Register -> SDRAM */
- cfg->sdrc_mdr = AT91_SDRAMC_MD_SDRAM;
- /* SDRAM_TR */
- cfg->sdrc_tr2 = 1200;
-
- /* user reset enable */
- cfg->rstc_rmr =
- AT91_RSTC_KEY |
- AT91_RSTC_PROCRST |
- AT91_RSTC_RSTTYP_WAKEUP |
- AT91_RSTC_RSTTYP_WATCHDOG;
+ at91sam9_sdramc_initialize(&config, AT91SAM9263_BASE_EBI0_CS1);
}
-static void __bare_init skov_arm9cpu_init(void *fdt)
+ENTRY_FUNCTION(start_skov_arm9cpu_xload_mmc, r0, r1, r2)
{
- struct at91sam926x_board_cfg cfg;
+ const struct sam92_pmc_config sam92_pmc_config = {
+ /* X-tal is 16.000 MHz so 16 / 4 * (31 + 1) = 200 */
+ .diva = 14,
+ .mula = 171,
+ };
+ sam9263_lowlevel_init(&sam92_pmc_config);
+ arm_setup_stack(AT91SAM9263_SRAM0_BASE + AT91SAM9263_SRAM0_SIZE);
- cfg.pio = IOMEM(AT91SAM9263_BASE_PIOD);
- cfg.sdramc = IOMEM(AT91SAM9263_BASE_SDRAMC0);
- cfg.ebi_pio_is_peripha = true;
- cfg.matrix_csa = IOMEM(AT91SAM9263_BASE_MATRIX + AT91SAM9263_MATRIX_EBI0CSA);
+ relocate_to_current_adr();
+ setup_c();
- skovarm9cpu_board_config(&cfg);
- at91sam9263_board_init(&cfg);
+ sam92_dbgu_setup_ll(MASTER_CLOCK);
- barebox_arm_entry(AT91_CHIPSELECT_1, at91_get_sdram_size(cfg.sdramc),
- fdt);
+ sam92_udelay_init(MASTER_CLOCK);
+ sam9263_sdramc_init(MASTER_CLOCK);
+ sam9263_atmci_start_image(1, MASTER_CLOCK, 0);
}
extern char __dtb_at91_skov_arm9cpu_start[];
@@ -118,10 +72,6 @@ ENTRY_FUNCTION(start_skov_arm9cpu, r0, r1, r2)
{
void *fdt;
- arm_cpu_lowlevel_init();
-
- arm_setup_stack(AT91SAM9263_SRAM0_BASE + AT91SAM9263_SRAM0_SIZE);
fdt = __dtb_at91_skov_arm9cpu_start + get_runtime_offset();
-
- skov_arm9cpu_init(fdt);
+ barebox_arm_entry(AT91_CHIPSELECT_1, at91sam9263_get_sdram_size(0), fdt);
}
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index bc55b1c4e..f5f674d82 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -577,9 +577,7 @@ config MACH_SKOV_ARM9CPU
select SOC_AT91SAM9263
select OFDEVICE
select COMMON_CLK_OF_PROVIDER
- select HAVE_AT91_USB_CLK
- select HAVE_AT91_BOOTSTRAP
- select AT91SAM926X_BOARD_INIT
+ select MCI_ATMEL_PBL
help
Say y here if you are using SKOV's ARM9 CPU board
diff --git a/images/Makefile.at91 b/images/Makefile.at91
index 71cc959f5..9a33d3bb9 100644
--- a/images/Makefile.at91
+++ b/images/Makefile.at91
@@ -47,6 +47,11 @@ FILE_barebox-groboards-sama5d27-giantboard-xload-mmc.img = start_sama5d27_giantb
MAX_PBL_IMAGE_SIZE_start_sama5d27_giantboard_xload_mmc = 0xffff
image-$(CONFIG_MACH_SAMA5D27_GIANTBOARD) += barebox-groboards-sama5d27-giantboard-xload-mmc.img
+pblb-$(CONFIG_MACH_SKOV_ARM9CPU) += start_skov_arm9cpu_xload_mmc
+FILE_barebox-skov-arm9cpu-xload-mmc.img = start_skov_arm9cpu_xload_mmc.pblb
+MAX_PBL_MEMORY_SIZE_start_skov_arm9cpu = 0x12000
+image-$(CONFIG_MACH_SKOV_ARM9CPU) += barebox-skov-arm9cpu-xload-mmc.img
+
pblb-$(CONFIG_MACH_SKOV_ARM9CPU) += start_skov_arm9cpu
FILE_barebox-skov-arm9cpu.img = start_skov_arm9cpu.pblb
MAX_PBL_MEMORY_SIZE_start_skov_arm9cpu = 0x12000
--
2.34.1
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
