On 05.07.22 09:45, Sascha Hauer wrote:
> On Thu, Jun 30, 2022 at 02:40:34PM +0200, Ahmad Fatoum wrote:
>> For OF-enabled platforms with aliases, device file naming is pretty much
>> solved: If there is mmc2 = &something, then we have a mmc2 device and
>> a /dev/mmc2 device file. For other platforms like x86, EFI-provided
>> devices are harder to get ahold of. Add a command to make this
>> straight-forward to do in scripts. The main use of this is probably to
>> access parameters like nt_signature or guid:
>>
>> devloop /dev/disk0 guid
>>
>> This would print to console, but we have no output capture yet, so add
>> an optional -v VARIABLE parameter as well to allow easy use from
>> scripts.
>>
>> Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
>> ---
>> commands/Kconfig | 13 ++++++++
>> commands/Makefile | 1 +
>> commands/devlookup.c | 73 ++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 87 insertions(+)
>> create mode 100644 commands/devlookup.c
>>
>> diff --git a/commands/Kconfig b/commands/Kconfig
>> index fb4dcefed8bf..5bab78fd1ce7 100644
>> --- a/commands/Kconfig
>> +++ b/commands/Kconfig
>> @@ -75,6 +75,19 @@ config CMD_DEVINFO
>> If called with a device path being the argument, devinfo shows more
>> default information about this device and its parameters.
>>
>> +config CMD_DEVLOOKUP
>> + tristate
>> + prompt "devlookup"
>> + help
>> + Look up device behind device file and its parameters
>> +
>> + devlookup [-v VAR] /dev/DEVICE [parameter]
>> +
>> + Detects the device behind a device file and outputs it,
>> + unless a second argument is given. In that case the device
>> + parameter with that name is looked up. Specifying -v VARIABLE
>> + will write output to VARIABLE instead of printing it.
>> +
>> config CMD_DEVUNBIND
>> tristate
>> prompt "devunbind"
>> diff --git a/commands/Makefile b/commands/Makefile
>> index 6c3a7a1dabcd..b43da1a80173 100644
>> --- a/commands/Makefile
>> +++ b/commands/Makefile
>> @@ -110,6 +110,7 @@ obj-$(CONFIG_CMD_DETECT) += detect.o
>> obj-$(CONFIG_CMD_BOOT) += boot.o
>> obj-$(CONFIG_CMD_DEVINFO) += devinfo.o
>> obj-$(CONFIG_CMD_DEVUNBIND) += devunbind.o
>> +obj-$(CONFIG_CMD_DEVLOOKUP) += devlookup.o
>> obj-$(CONFIG_CMD_DRVINFO) += drvinfo.o
>> obj-$(CONFIG_CMD_READF) += readf.o
>> obj-$(CONFIG_CMD_MENUTREE) += menutree.o
>> diff --git a/commands/devlookup.c b/commands/devlookup.c
>> new file mode 100644
>> index 000000000000..9599df7b10bc
>> --- /dev/null
>> +++ b/commands/devlookup.c
>> @@ -0,0 +1,73 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +
>> +#include <common.h>
>> +#include <command.h>
>> +#include <fs.h>
>> +#include <getopt.h>
>> +#include <malloc.h>
>> +#include <linux/stat.h>
>> +#include <linux/ctype.h>
>> +#include <environment.h>
>> +
>> +static int report(const char *variable, const char *val)
>> +{
>> + if (variable)
>> + return setenv(variable, val);
>> +
>> + if (!val)
>> + return -errno;
>> +
>> + printf("%s\n", val);
>> + return 0;
>> +}
>> +
>> +static int do_devlookup(int argc, char *argv[])
>> +{
>> + const char *variable = NULL, *devicefile, *paramname;
>> + struct cdev *cdev;
>> + int opt;
>> +
>> + while ((opt = getopt(argc, argv, "v:")) > 0) {
>> + switch(opt) {
>> + case 'v':
>> + variable = optarg;
>> + break;
>> + }
>> + }
>> +
>> + if (argc - optind == 0 || argc - optind > 2)
>> + return COMMAND_ERROR_USAGE;
>> +
>> + devicefile = argv[optind];
>> + paramname = argv[optind+1];
>> +
>> + if (!strstarts(devicefile, "/dev/"))
>> + return COMMAND_ERROR_USAGE;
>
> Should we skip the /dev/ part so that we can allow cdev names directly?
> Something like:
>
> if (strstarts(devicefile, "/dev/"))
> devicefile += sizeof "/dev/" - 1;
Sounds good to me.
>
> Sascha
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
